Re: [PATCH] ARM: dts: rockchip: Add missing cpu operating points for rk3288-tinker

[Kever Yang <kever.yang@rock-chips.com>]

Hi Jack,

On 2019/12/2 下午11:35, Jack Chen wrote:
> From: Jack Chen <redchenjs@live.com>
>
> The Tinker Board / S devices use a special chip variant called rk3288-c
> and use different operating points with a higher max frequency.
>
> So add the missing operating points for Tinker Board / S devices, also
> increase the vdd_cpu regulator-max-microvolt to 1400000 uV so that the
> cpu can operate at 1.8 GHz.
>
> Signed-off-by: Jack Chen <redchenjs@live.com>

This patch looks good to me,


Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

Thanks,
- Kever
> ---
>   arch/arm/boot/dts/rk3288-tinker.dtsi | 13 ++++++++++++-
>   1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
> index 81e4e953d4a4..09e83b3d5e7d 100644
> --- a/arch/arm/boot/dts/rk3288-tinker.dtsi
> +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
> @@ -113,6 +113,17 @@
>   	cpu0-supply = <&vdd_cpu>;
>   };
>   
> +&cpu_opp_table {
> +	opp-1704000000 {
> +		opp-hz = /bits/ 64 <1704000000>;
> +		opp-microvolt = <1350000>;
> +	};
> +	opp-1800000000 {
> +		opp-hz = /bits/ 64 <1800000000>;
> +		opp-microvolt = <1400000>;
> +	};
> +};
> +
>   &gmac {
>   	assigned-clocks = <&cru SCLK_MAC>;
>   	assigned-clock-parents = <&ext_gmac>;
> @@ -175,7 +186,7 @@
>   				regulator-always-on;
>   				regulator-boot-on;
>   				regulator-min-microvolt = <750000>;
> -				regulator-max-microvolt = <1350000>;
> +				regulator-max-microvolt = <1400000>;
>   				regulator-name = "vdd_arm";
>   				regulator-ramp-delay = <6000>;
>   				regulator-state-mem {