Re: [PATCH v9 0/7] Add DDR4 memory-controller bindings and factorise LPDDR and DDR bindings

[Alexandre TORGUE <alexandre.torgue@foss.st.com>]

Hi Clément

On 11/18/25 16:07, Clément Le Goffic wrote:
> Introduce DDR4 bindings, which is the first DDR type to be added.
> As the DDR and LPDDR use the same properties, factorise them in a
> sdram-props bindings file and rename lpddr-channel into sdram-channel.
> 
> Changes in v9:
> - In the ddr4 compatible pattern :
>      s/ddrX-YYYY,AAAA...,ZZ/ddrX-YYYY,AAAA...-ZZ/
>      The comma before the "ZZ" part has been replaced with a minus.
> - Add information about how the compatible is constructed in the patch 2:
>    "dt-bindings: memory: introduce DDR4"
> - Add Krzysztof Kozlowski's trailer on patch 1
> - Link to v8: https://lore.kernel.org/r/20250930-b4-ddr-bindings-v8-0-fe4d8c015a50@gmail.com
> 
> Changes in v8:
> - Globally fix typo/grammar in SDRAM props bindings:
>    - DDR4 bindings compatible description:
>      - s/lpddrX,YY,ZZZZ/lpddrX-YY,ZZZZ/
>      - s/in lower case/lowercase/
>      - s/statis/static/
>      - s/~/-/
>    - Add an "s" where a plural form is used (e.g. registers) in the DDR4
>      binding revision-id description
> - Fix the number of chars that an SPD can contain in the part number
>    field.
> - Link to v7: https://lore.kernel.org/r/20250922-b4-ddr-bindings-v7-0-b3dd20e54db6@gmail.com
> 
> The v7 is a subset of the v6 and other prior versions, split to simplify
> the review and merging process.
> 
> Changes in v7:
> - None
> - Link to v6: https://lore.kernel.org/all/20250909-b4-ddrperfm-upstream-v6-5-ce082cc801b5@gmail.com/
> 
> Signed-off-by: Clément Le Goffic <legoffic.clement@gmail.com>
> ---
> Clément Le Goffic (7):
>        dt-bindings: memory: factorise LPDDR props into SDRAM props
>        dt-bindings: memory: introduce DDR4
>        dt-bindings: memory: factorise LPDDR channel binding into SDRAM channel
>        dt-binding: memory: add DDR4 channel compatible
>        dt-bindings: memory: SDRAM channel: standardise node name
>        arm64: dts: st: add LPDDR channel to stm32mp257f-dk board
>        arm64: dts: st: add DDR channel to stm32mp257f-ev1 board
> 

DT patches [6]&[7] applied on stm32-next.

Regards
Alex