Re: [PATCH net-next v6 2/2] dinghai: add hardware register access and PCI? capability scanning

[Andrew Lunn <andrew@lunn.ch>]

> +int zxdh_pf_common_cfg_init(struct dh_core_dev *dh_dev)
> +{
> +	struct zxdh_pf_device *pf_dev = dh_dev->priv;
> +	struct pci_dev *pdev = dh_dev->pdev;
> +	int common;
> +
> +	/* check for a common config: if not, use legacy mode (bar 0). */
> +	common = zxdh_pf_pci_find_capability(pdev, ZXDH_PCI_CAP_COMMON_CFG,
> +					     IORESOURCE_IO | IORESOURCE_MEM,
> +					     &pf_dev->modern_bars);
> +	if (common == 0) {
> +		dev_err(dh_dev->device,
> +			"missing capabilities %i, leaving for legacy driver\n",
> +			common);

That looks double odd. Normally you would use !common. Also, you know
common is 0, so why use "%i", when it could be just '0'.

> +int zxdh_pf_notify_cfg_init(struct dh_core_dev *dh_dev)
> +{
> +	struct zxdh_pf_device *pf_dev = dh_dev->priv;
> +	struct pci_dev *pdev = dh_dev->pdev;
> +	u32 notify_length;
> +	u32 notify_offset;
> +	int notify;
> +
> +	/* If common is there, these should be too... */
> +	notify = zxdh_pf_pci_find_capability(pdev, ZXDH_PCI_CAP_NOTIFY_CFG,
> +					     IORESOURCE_IO | IORESOURCE_MEM,
> +					     &pf_dev->modern_bars);
> +	if (notify == 0) {
> +		dev_err(dh_dev->device, "missing capabilities %i\n", notify);
> +		return -EINVAL;
> +	}
> +

Same again.

    Andrew

---
pw-bot: cr