From: claudiu beznea <claudiu.beznea@tuxon.dev>
To: Geert Uytterhoeven <geert@linux-m68k.org>, Arnd Bergmann <arnd@arndb.de>
Cc: Sergey Shtylyov <s.shtylyov@omp.ru>,
"David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Rob Herring <robh+dt@kernel.org>,
krzysztof.kozlowski+dt@linaro.org,
Conor Dooley <conor+dt@kernel.org>,
Russell King <linux@armlinux.org.uk>,
Magnus Damm <magnus.damm@gmail.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Marek Szyprowski <m.szyprowski@samsung.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Andrew Davis <afd@ti.com>, Mark Brown <broonie@kernel.org>,
Alexander Stein <alexander.stein@ew.tq-group.com>,
eugen.hristev@collabora.com, sergei.shtylyov@gmail.com, "Lad,
Prabhakar" <prabhakar.mahadev-lad.rj@bp.renesas.com>,
Biju Das <biju.das.jz@bp.renesas.com>,
Linux-Renesas <linux-renesas-soc@vger.kernel.org>,
Netdev <netdev@vger.kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
"open list:GPIO SUBSYSTEM" <linux-gpio@vger.kernel.org>,
Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Subject: Re: [PATCH 14/14] arm: multi_v7_defconfig: Enable CONFIG_RAVB
Date: Mon, 20 Nov 2023 11:05:08 +0200 [thread overview]
Message-ID: <ea3567ef-1293-4679-bd25-730c1b3e60b9@tuxon.dev> (raw)
In-Reply-To: <CAMuHMdUkVO7cXpsHd_oGvEpZdJpP6GP+VC8H5GAZ94KJf2joLA@mail.gmail.com>
On 20.11.2023 10:58, Geert Uytterhoeven wrote:
> On Mon, Nov 20, 2023 at 9:44 AM Arnd Bergmann <arnd@arndb.de> wrote:
>> On Mon, Nov 20, 2023, at 08:00, Claudiu wrote:
>>> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>>>
>>> ravb driver is used by RZ/G1H. Enable it in multi_v7_defconfig.
>
> Used by:
> - iWave-RZ/G1M/G1N Qseven carrier board,
> - iWave-RZ/G1H Qseven board,
> - iWave-RZG1E SODIMM carrier board,
> - iWave-RZ/G1C single board computer.
>
> So I'd write "used by various iWave RZ/G1 development boards".
OK, I'll update it in v2.
I noticed it is needed while checking various bits on a RZ/G1H based board
so I considered that if there is at least one user for it it is enough to
have it enabled.
Thank you,
Claudiu Beznea
>
>>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>>
>> We have a mix of =y and =m for ethernet drivers, and usually
>> only have drivers built-in when they are frequently tested
>> with NFS root booting.
>>
>> Do you need this as well, or could it be =m instead?
>
> As the default chosen/bootargs for the iWave-RZ/G1M/G1N Qseven carrier
> board contains root=/dev/nfs, builtin is appropriate.
> The iWave-RZ/G1H Qseven board defaults to root=/dev/mmcblk0p1.
>
> Gr{oetje,eeting}s,
>
> Geert
>
next prev parent reply other threads:[~2023-11-20 9:05 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-20 7:00 [PATCH 00/14] renesas: rzg3s: Add support for Ethernet Claudiu
2023-11-20 7:00 ` [PATCH 01/14] clk: renesas: rzg2l-cpg: Reuse code in rzg2l_cpg_reset() Claudiu
2023-11-23 15:48 ` Geert Uytterhoeven
2023-11-20 7:00 ` [PATCH 02/14] clk: renesas: rzg2l-cpg: Check reset monitor registers Claudiu
2023-11-23 15:53 ` Geert Uytterhoeven
2023-11-23 17:19 ` claudiu beznea
2023-11-20 7:00 ` [PATCH 03/14] clk: renesas: rzg2l-cpg: Add support for MSTOP Claudiu
2023-11-23 16:35 ` Geert Uytterhoeven
2023-11-24 9:08 ` Geert Uytterhoeven
2023-11-27 7:37 ` claudiu beznea
2023-12-01 15:36 ` Geert Uytterhoeven
2023-11-24 9:24 ` claudiu beznea
2023-11-20 7:00 ` [PATCH 04/14] clk: renesas: r9a08g045-cpg: Add clock and reset support for ETH0 and ETH1 Claudiu
2023-12-01 15:59 ` Geert Uytterhoeven
2023-12-04 7:34 ` claudiu beznea
2023-11-20 7:00 ` [PATCH 05/14] pinctrl: renesas: rzg2l: Move arg in the main function block Claudiu
2023-12-01 16:15 ` Geert Uytterhoeven
2023-12-04 7:37 ` claudiu beznea
2023-11-20 7:00 ` [PATCH 06/14] pinctrl: renesas: rzg2l: Add pin configuration support for pinmux groups Claudiu
2023-12-01 16:51 ` Geert Uytterhoeven
2023-11-20 7:00 ` [PATCH 07/14] pinctrl: renesas: rzg2l: Add support to select power source for Ethernet pins Claudiu
2023-12-01 17:11 ` Geert Uytterhoeven
2023-11-20 7:00 ` [PATCH 08/14] pinctrl: renesas: rzg2l: Add output enable support Claudiu
2023-12-01 17:25 ` Geert Uytterhoeven
2023-11-20 7:00 ` [PATCH 09/14] dt-bindings: net: renesas,etheravb: Document RZ/G3S support Claudiu
2023-11-20 15:39 ` Conor Dooley
2023-11-20 18:39 ` Sergey Shtylyov
2023-11-21 16:29 ` Geert Uytterhoeven
2023-11-20 7:00 ` [PATCH 10/14] arm64: renesas: r9a08g045: Add Ethernet nodes Claudiu
2023-12-01 17:35 ` Geert Uytterhoeven
2023-12-04 7:41 ` claudiu beznea
2023-12-04 8:02 ` Geert Uytterhoeven
2023-12-04 8:38 ` claudiu beznea
2023-12-04 9:00 ` Geert Uytterhoeven
2023-11-20 7:00 ` [PATCH 11/14] arm64: renesas: rzg3s-smarc-som: Invert the logic for SW_SD2_EN macro Claudiu
2023-12-06 10:33 ` Geert Uytterhoeven
2023-12-06 10:56 ` Geert Uytterhoeven
2023-12-06 11:11 ` claudiu beznea
2023-12-06 11:27 ` Geert Uytterhoeven
2023-12-06 11:31 ` claudiu beznea
2023-11-20 7:00 ` [PATCH 12/14] arm64: dts: renesas: Improve documentation for SW_SD0_DEV_SEL Claudiu
2023-11-20 8:41 ` Sergey Shtylyov
2023-12-06 11:03 ` Geert Uytterhoeven
2023-11-20 7:00 ` [PATCH 13/14] arm64: dts: renesas: rzg3s-smarc-som: Enable Ethernet interfaces Claudiu
2023-12-06 11:22 ` Geert Uytterhoeven
2023-12-06 11:48 ` claudiu beznea
2023-11-20 7:00 ` [PATCH 14/14] arm: multi_v7_defconfig: Enable CONFIG_RAVB Claudiu
2023-11-20 8:44 ` Arnd Bergmann
2023-11-20 8:56 ` claudiu beznea
2023-11-20 8:58 ` Geert Uytterhoeven
2023-11-20 9:05 ` claudiu beznea [this message]
2023-11-27 10:01 ` Geert Uytterhoeven
2023-11-23 15:01 ` [PATCH 00/14] renesas: rzg3s: Add support for Ethernet Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ea3567ef-1293-4679-bd25-730c1b3e60b9@tuxon.dev \
--to=claudiu.beznea@tuxon.dev \
--cc=afd@ti.com \
--cc=alexander.stein@ew.tq-group.com \
--cc=alexandre.torgue@foss.st.com \
--cc=arnd@arndb.de \
--cc=biju.das.jz@bp.renesas.com \
--cc=broonie@kernel.org \
--cc=claudiu.beznea.uj@bp.renesas.com \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=eugen.hristev@collabora.com \
--cc=geert@linux-m68k.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kuba@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=m.szyprowski@samsung.com \
--cc=magnus.damm@gmail.com \
--cc=mturquette@baylibre.com \
--cc=netdev@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=pabeni@redhat.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=robh+dt@kernel.org \
--cc=s.shtylyov@omp.ru \
--cc=sboyd@kernel.org \
--cc=sergei.shtylyov@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®