From: Hans Verkuil <hverkuil+cisco@kernel.org>
To: Deepa Guthyappa Madivalara <deepa.madivalara@oss.qualcomm.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Vikash Garodia <vikash.garodia@oss.qualcomm.com>,
Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>,
Abhinav Kumar <abhinav.kumar@linux.dev>,
Bryan O'Donoghue <bod@kernel.org>
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org, kernel test robot <lkp@intel.com>
Subject: Re: [PATCH v5 1/5] media: uapi: Introduce new control for video encoder ROI
Date: Thu, 10 Sep 2026 09:49:02 +0200 [thread overview]
Message-ID: <eb975daf-9474-4368-814c-6ea12e5f7700@kernel.org> (raw)
In-Reply-To: <790e3c11-1ba5-4e2f-a072-4deb4f384c3d@kernel.org>
On 10/09/2026 09:37, Hans Verkuil wrote:
> On 15/08/2026 21:22, Deepa Guthyappa Madivalara wrote:
>> Add custom control, V4L2_CID_MPEG_VIDEO_ROI_MB_DELTA_QP for
>
> A small terminology issue: custom -> array
>
> Custom controls are driver-specific controls. But this adds a standard
> array control. Please check this series for the use of 'custom' and
> replace it with 'array'.
>
>> video encoder Region of Interest to allow applications to specify
>> different quality levels for specific regions in video frames. Define
>> V4L2_CID_MPEG_VIDEO_ROI_MB_SIZE to retrieve supported MB size based on
>> codec from the hardware encoder and set the corresponding ROI MB delta_qp
>> map that adjusts quantization relative to the frame QP's base value.
>>
>> This enables use cases like prioritizing quality for faces in video
>> conferencing or important objects in surveillance footage while reducing
>> bitrate for less critical areas.
>>
>> Signed-off-by: Deepa Guthyappa Madivalara <deepa.madivalara@oss.qualcomm.com>
>> ---
>> .../userspace-api/media/v4l/ext-ctrls-codec.rst | 19 +++++++++++++++++++
>> .../media/v4l/videodev2.h.rst.exceptions | 1 +
>> .../userspace-api/media/v4l/vidioc-g-ext-ctrls.rst | 4 ++++
>> .../userspace-api/media/v4l/vidioc-queryctrl.rst | 6 ++++++
>> include/media/v4l2-ctrls.h | 1 +
>> include/uapi/linux/v4l2-controls.h | 2 ++
>> include/uapi/linux/videodev2.h | 2 ++
>> 7 files changed, 35 insertions(+)
>>
>> diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
>> index ab865a1a6ba929f1725ce2ab0fd3aeee4a69329a..c16b1c5cd1c02b7f66b5f13433eb039eb615b35e 100644
>> --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
>> +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
>> @@ -1674,6 +1674,25 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
>> Codecs need to always use the specified range, rather then a HW custom range.
>> Applicable to encoders
>>
>> +``V4L2_CID_MPEG_VIDEO_ROI_MB_DELTA_QP (__s8)``
>
> __s8 -> __s8 array
>
> Otherwise it is not clear that this is a compound control containing an array.
>
>> + This custom control is used to set ROI MB map delta_Qp for the whole frame.
>
> Here is another use of 'custom' were 'array' is meant.
>
>> + The frame is divided into a grid of MB Size by MB Size pixels (MB Size is
>> + obtained from querying ``V4L2_CID_MPEG_VIDEO_ROI_MB_SIZE``). Each block
>> + is configured with delta_Qp in raster order. The valid range for delta_Qp
>> + is encoder dependent.
Add:
This control is a dynamically sized 1-dimensional array,
V4L2_CTRL_FLAG_DYNAMIC_ARRAY flag must be set when using it.
Regards,
Hans
>> + Applicable to encoders.
>> +
>> +``V4L2_CID_MPEG_VIDEO_ROI_MB_SIZE`` (integer)
>> + A read-only control that reports the MB Size used for the ROI delta_QP map.
>> + The supported MB Size depends on the encoder codec.
>> + Only square MBs are supported. The value returned represents the
>> + width and height of each block in pixels. The ROI delta_QP map provided
>> + through the ROI control must use the MB Size reported by this control.
>> + The number of entries in the ROI delta_QP array is determined by the
>> + frame dimensions and the reported MB Size. For example, for a QCIF frame
>> + (176x144) if reported MB Size is 16, the delta_QP array must contain
>> + 99 entries (176 x 144 / 16 x 16).
>
> What happens if the width/height is not nicely dividable by 16? E.g. 1920x1080.
>
>> +
>> .. raw:: latex
>>
>> \normalsize
>> diff --git a/Documentation/userspace-api/media/v4l/videodev2.h.rst.exceptions b/Documentation/userspace-api/media/v4l/videodev2.h.rst.exceptions
>> index 6182b4e2d2ee002c0d3562e1cc3bc2fd9c4286d6..b036ed3ec2f0744175cad1cbc4e73fe828e0c955 100644
>> --- a/Documentation/userspace-api/media/v4l/videodev2.h.rst.exceptions
>> +++ b/Documentation/userspace-api/media/v4l/videodev2.h.rst.exceptions
>> @@ -141,6 +141,7 @@ replace symbol V4L2_CTRL_TYPE_STRING :c:type:`V4L.v4l2_ctrl_type`
>> replace symbol V4L2_CTRL_TYPE_U16 :c:type:`V4L.v4l2_ctrl_type`
>> replace symbol V4L2_CTRL_TYPE_U32 :c:type:`V4L.v4l2_ctrl_type`
>> replace symbol V4L2_CTRL_TYPE_U8 :c:type:`V4L.v4l2_ctrl_type`
>> +replace symbol V4L2_CTRL_TYPE_S8 :c:type:`V4L.v4l2_ctrl_type`
>> replace symbol V4L2_CTRL_TYPE_MPEG2_SEQUENCE :c:type:`V4L.v4l2_ctrl_type`
>> replace symbol V4L2_CTRL_TYPE_MPEG2_PICTURE :c:type:`V4L.v4l2_ctrl_type`
>> replace symbol V4L2_CTRL_TYPE_MPEG2_QUANTISATION :c:type:`V4L.v4l2_ctrl_type`
>> diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
>> index d78328152b7552f8f0d30a9e2f7c104bfd4b70d3..fe5f8992389c32d8f35f432229ef2f734002644e 100644
>> --- a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
>> +++ b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
>> @@ -188,6 +188,10 @@ still cause this situation.
>> - ``p_u32``
>> - A pointer to a matrix control of unsigned 32-bit values. Valid if
>> this control is of type ``V4L2_CTRL_TYPE_U32``.
>> + * - __s8 *
>> + - ``p_s8``
>> + - A pointer to a matrix control of signed 8-bit values. Valid if
>> + this control is of type ``V4L2_CTRL_TYPE_S8``.
>> * - __s32 *
>> - ``p_s32``
>> - A pointer to a matrix control of signed 32-bit values. Valid if
>> diff --git a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
>> index 82c8b52e771ce9301491b3f752e501a8fe7e2434..57e1652ae72e0324742142446acf32a16b94941c 100644
>> --- a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
>> +++ b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
>> @@ -425,6 +425,12 @@ See also the examples in :ref:`control`.
>> - any
>> - An unsigned 32-bit valued control ranging from minimum to maximum
>> inclusive. The step value indicates the increment between values.
>> + * - ``V4L2_CTRL_TYPE_S8``
>> + - any
>> + - any
>> + - any
>> + - A signed 8-bit valued control ranging from minimum to maximum
>> + inclusive. The step value indicates the increment between values.
>> * - ``V4L2_CTRL_TYPE_MPEG2_QUANTISATION``
>> - n/a
>> - n/a
>> diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h
>> index 327976b14d50b73a631e4d2ed95d9f4d146c45ab..a1806ddbc797efa52e83cd3f685ef70d5b5483d2 100644
>> --- a/include/media/v4l2-ctrls.h
>> +++ b/include/media/v4l2-ctrls.h
>> @@ -64,6 +64,7 @@ union v4l2_ctrl_ptr {
>> s32 *p_s32;
>> s64 *p_s64;
>> u8 *p_u8;
>> + s8 *p_s8;
>> u16 *p_u16;
>> u32 *p_u32;
>> char *p_char;
>> diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
>> index affec0ab4781507be761cb791ff737460acf9cb7..00a2c48630bd198faa9a2b833a9aa346d8357555 100644
>> --- a/include/uapi/linux/v4l2-controls.h
>> +++ b/include/uapi/linux/v4l2-controls.h
>> @@ -920,6 +920,8 @@ enum v4l2_mpeg_video_av1_level {
>> };
>>
>> #define V4L2_CID_MPEG_VIDEO_AVERAGE_QP (V4L2_CID_CODEC_BASE + 657)
>> +#define V4L2_CID_MPEG_VIDEO_ROI_MB_DELTA_QP (V4L2_CID_CODEC_BASE + 658)
>> +#define V4L2_CID_MPEG_VIDEO_ROI_MB_SIZE (V4L2_CID_CODEC_BASE + 659)
>>
>> /* MPEG-class control IDs specific to the CX2341x driver as defined by V4L2 */
>> #define V4L2_CID_CODEC_CX2341X_BASE (V4L2_CTRL_CLASS_CODEC | 0x1000)
>> diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
>> index 5373dba640fae3d19247ab1c74ba336e05dc0fe0..95d8369e0d3d1e434978b9e576e0ef122691c65c 100644
>> --- a/include/uapi/linux/videodev2.h
>> +++ b/include/uapi/linux/videodev2.h
>> @@ -1884,6 +1884,7 @@ struct v4l2_ext_control {
>> __s64 value64;
>> char __user *string;
>> __u8 __user *p_u8;
>> + __s8 __user *p_s8;
>> __u16 __user *p_u16;
>> __u32 __user *p_u32;
>> __s32 __user *p_s32;
>> @@ -1961,6 +1962,7 @@ enum v4l2_ctrl_type {
>> V4L2_CTRL_TYPE_U8 = 0x0100,
>> V4L2_CTRL_TYPE_U16 = 0x0101,
>> V4L2_CTRL_TYPE_U32 = 0x0102,
>> + V4L2_CTRL_TYPE_S8 = 0x0103,
>> V4L2_CTRL_TYPE_AREA = 0x0106,
>> V4L2_CTRL_TYPE_RECT = 0x0107,
>>
>>
>
> Hmm, I see that patch 2/5 adds the v4l2-core changes for the new controls.
>
> Can you rework patches 1 and 2? It is much easier to review if the first
> patch adds V4L2_CTRL_TYPE_S8 support in both headers, documentation and v4l2-core,
> and the second patch does the same for the new controls.
>
> Currently the patches mix adding the new type and new controls, and that's actually
> hard to review.
>
> Regards,
>
> Hans
>
next prev parent reply other threads:[~2026-09-10 7:49 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-15 19:22 [PATCH v5 0/5] Implement Region of Interest(ROI) support Deepa Guthyappa Madivalara
2026-08-15 19:22 ` [PATCH v5 1/5] media: uapi: Introduce new control for video encoder ROI Deepa Guthyappa Madivalara
2026-09-10 7:37 ` Hans Verkuil
2026-09-10 7:49 ` Hans Verkuil [this message]
2026-08-15 19:22 ` [PATCH v5 2/5] media: v4l2-core: Add support for video encoder ROI control Deepa Guthyappa Madivalara
2026-09-10 7:49 ` Hans Verkuil
2026-08-15 19:22 ` [PATCH v5 3/5] media: iris: Add ROI delta QP control support for HFI Gen2 encoders Deepa Guthyappa Madivalara
2026-08-15 19:22 ` [PATCH v5 4/5] media: iris: Add HFI metadata buffer delivery support for " Deepa Guthyappa Madivalara
2026-08-15 19:22 ` [PATCH v5 5/5] media: iris: Add BUF_ROIMB_DELTAQP metadata buffer for ROI delta QP Deepa Guthyappa Madivalara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=eb975daf-9474-4368-814c-6ea12e5f7700@kernel.org \
--to=hverkuil+cisco@kernel.org \
--cc=abhinav.kumar@linux.dev \
--cc=bod@kernel.org \
--cc=deepa.madivalara@oss.qualcomm.com \
--cc=dikshita.agarwal@oss.qualcomm.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=lkp@intel.com \
--cc=mchehab@kernel.org \
--cc=vikash.garodia@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®