Re: [PATCH v8 4/5] soc: qcom: add pd-mapper implementation

[Chris Lew <quic_clew@quicinc.com>]

On 5/11/2024 2:56 PM, Dmitry Baryshkov wrote:
> Existing userspace protection domain mapper implementation has several
> issue. It doesn't play well with CONFIG_EXTRA_FIRMWARE, it doesn't
> reread JSON files if firmware location is changed (or if firmware was
> not available at the time pd-mapper was started but the corresponding
> directory is mounted later), etc.
> 
> Provide in-kernel service implementing protection domain mapping
> required to work with several services, which are provided by the DSP
> firmware.
> 
> This module is loaded automatically by the remoteproc drivers when
> necessary via the symbol dependency. It uses a root node to match a
> protection domains map for a particular board. It is not possible to
> implement it as a 'driver' as there is no corresponding device.
> 
> Tested-by: Steev Klimaszewski <steev@kali.org>
> Tested-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>   drivers/soc/qcom/Kconfig          |  11 +
>   drivers/soc/qcom/Makefile         |   1 +
>   drivers/soc/qcom/pdr_internal.h   |  14 +
>   drivers/soc/qcom/qcom_pd_mapper.c | 676 ++++++++++++++++++++++++++++++++++++++
>   drivers/soc/qcom/qcom_pdr_msg.c   |  34 ++
>   5 files changed, 736 insertions(+)
> 

Reviewed-by: Chris Lew <quic_clew@quicinc.com>