From: "Reinaldo Carvalho" <reinaldow@gmail.com>
To: linux-kernel@vger.kernel.org
Subject: megaraid.c, all kernel versions, problem with multi-luns
Date: Wed, 30 May 2007 20:09:44 -0300 [thread overview]
Message-ID: <ec36785a0705301609t62676c76q3a2b726bf51d50db@mail.gmail.com> (raw)
Hi,
I have a Dell PowerEdge Expandable RAID controller, with a hardware
Raid-5 at Channel 01 running perfectly, and a nCipher Crypter at
Channel 02.
This controller doesn't correctly detect devices (e.g. nCipher
Crypter) with multiples LUNs. Only one LUN is detected.
At another controller (e.g. Adaptec 79xx) two LUNs were detect. I
compiled 2.6.8, 2.6.18 and 2.6.21.3 to test megaraid driver and all
failed detecting two LUNs.
I think that this is a firmware problem, but i'd like have some opinions.
I read some docs
(http://www.suse.de/~garloff/linux/scsi-scan/scsi-scanning.html,
http://www.ictp.trieste.it/~radionet/nuc1996/ref/howto-html/scsi-howto-2.html)
and this problem doesn't seem to be simple.
Best regards,
More information with Dell PowerEdge Expandable RAID controller (LSI
Logic MegaRaid):
Attached devices:
Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: PE/PV Model: 1x5 SCSI BP Rev: 1.0
Type: Processor ANSI SCSI revision: 02
Host: scsi0 Channel: 01 Id: 00 Lun: 00
Vendor: nCipher Model: Fastness Crypto Rev: 2*00
Type: Processor ANSI SCSI revision: 02
Host: scsi0 Channel: 02 Id: 00 Lun: 00
Vendor: MegaRAID Model: LD 0 RAID5 279G Rev: 522A
Type: Direct-Access ANSI SCSI revision: 02
14:0e.0 RAID bus controller: Dell PowerEdge Expandable RAID controller
4 (rev 06)
Subsystem: Dell PowerEdge Expandable RAID Controller 4e/Di
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping+ SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (32000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at d7ff0000 (32-bit, prefetchable) [size=64K]
Region 2: Memory at defc0000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at df000000 [disabled] [size=128K]
Capabilities: <access denied>
14:0e.0 0104: 1028:0013 (rev 06)
Information with Adaptec 79xx or others SCSI controllers:
Host: scsi0 Channel: 01 Id: 00 Lun: 00
Vendor: nCipher Model: Fastness Crypto Rev: 2*00
Type: Processor ANSI SCSI revision: 02
Host: scsi0 Channel: 01 Id: 00 Lun: 01
Vendor: nCipher Model: Fastness Crypto Rev: 2*00
Type: Processor ANSI SCSI revision: 02
--
Reinaldo Carvalho
next reply other threads:[~2007-05-30 23:10 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-30 23:09 Reinaldo Carvalho [this message]
2007-05-30 23:15 ` Jesper Juhl
2007-05-30 23:19 ` Reinaldo Carvalho
2007-06-01 23:42 ` Andrew Morton
2007-06-02 1:40 ` Patro, Sumant
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ec36785a0705301609t62676c76q3a2b726bf51d50db@mail.gmail.com \
--to=reinaldow@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®