From: Amit Kachhap <amit.kachhap@arm.com>
To: Boyan Karatotev <boyan.karatotev@arm.com>,
linux-arm-kernel@lists.infradead.org,
linux-kselftest@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: vincenzo.frascino@arm.com, boian4o1@gmail.com,
Shuah Khan <shuah@kernel.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>
Subject: Re: [PATCH 1/4] kselftests/arm64: add a basic Pointer Authentication test
Date: Mon, 31 Aug 2020 13:35:39 +0530 [thread overview]
Message-ID: <ec48c4c2-7034-ddfe-2120-85e7856dc062@arm.com> (raw)
In-Reply-To: <20200828131606.7946-2-boyan.karatotev@arm.com>
Hi Boyan,
On 8/28/20 6:46 PM, Boyan Karatotev wrote:
> PAuth signs and verifies return addresses on the stack. It does so by
> inserting a Pointer Authentication code (PAC) into some of the unused top
> bits of an address. This is achieved by adding paciasp/autiasp instructions
> at the beginning and end of a function.
>
> This feature is partially backwards compatible with earlier versions of the
> ARM architecture. To coerce the compiler into emitting fully backwards
> compatible code the main file is compiled to target an earlier ARM version.
> This allows the tests to check for the feature and print meaningful error
> messages instead of crashing.
>
> Add a test to verify that corrupting the return address results in a
> SIGSEGV on return.
>
> Cc: Shuah Khan <shuah@kernel.org>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Will Deacon <will@kernel.org>
> Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
> ---
> tools/testing/selftests/arm64/Makefile | 2 +-
> .../testing/selftests/arm64/pauth/.gitignore | 1 +
> tools/testing/selftests/arm64/pauth/Makefile | 22 ++++++++++++
> tools/testing/selftests/arm64/pauth/helper.h | 10 ++++++
> tools/testing/selftests/arm64/pauth/pac.c | 32 +++++++++++++++++
> .../selftests/arm64/pauth/pac_corruptor.S | 36 +++++++++++++++++++
> 6 files changed, 102 insertions(+), 1 deletion(-)
> create mode 100644 tools/testing/selftests/arm64/pauth/.gitignore
> create mode 100644 tools/testing/selftests/arm64/pauth/Makefile
> create mode 100644 tools/testing/selftests/arm64/pauth/helper.h
> create mode 100644 tools/testing/selftests/arm64/pauth/pac.c
> create mode 100644 tools/testing/selftests/arm64/pauth/pac_corruptor.S
>
> diff --git a/tools/testing/selftests/arm64/Makefile b/tools/testing/selftests/arm64/Makefile
> index 93b567d23c8b..525506fd97b9 100644
> --- a/tools/testing/selftests/arm64/Makefile
> +++ b/tools/testing/selftests/arm64/Makefile
> @@ -4,7 +4,7 @@
> ARCH ?= $(shell uname -m 2>/dev/null || echo not)
>
> ifneq (,$(filter $(ARCH),aarch64 arm64))
> -ARM64_SUBTARGETS ?= tags signal
> +ARM64_SUBTARGETS ?= tags signal pauth
> else
> ARM64_SUBTARGETS :=
> endif
> diff --git a/tools/testing/selftests/arm64/pauth/.gitignore b/tools/testing/selftests/arm64/pauth/.gitignore
> new file mode 100644
> index 000000000000..b557c916720a
> --- /dev/null
> +++ b/tools/testing/selftests/arm64/pauth/.gitignore
> @@ -0,0 +1 @@
> +pac
> diff --git a/tools/testing/selftests/arm64/pauth/Makefile b/tools/testing/selftests/arm64/pauth/Makefile
> new file mode 100644
> index 000000000000..785c775e5e41
> --- /dev/null
> +++ b/tools/testing/selftests/arm64/pauth/Makefile
> @@ -0,0 +1,22 @@
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (C) 2020 ARM Limited
> +
> +CFLAGS += -mbranch-protection=pac-ret
There is no CFLAGS validation present which may give error with non
supported compiler.
Can you add a check something like,
+#check if the compiler works well
+pauth_cc_support := $(shell if ($(CC) $(CFLAGS) -march=armv8.3-a -E -x
c /dev/null -o /dev/null 2>&1) then echo "1"; fi)
+
+ifeq ($(pauth_cc_support),1)
TEST_GEN_PROGS := pac
TEST_GEN_FILES := pac_corruptor.o
+endif
include ../../lib.mk
+ifeq ($(pauth_cc_support),1)
# pac* and aut* instructions are not available on architectures berfore
# ARMv8.3. Therefore target ARMv8.3 wherever they are used directly
$(OUTPUT)/pac_corruptor.o: pac_corruptor.S
@@ -19,4 +25,4 @@ $(OUTPUT)/pac_corruptor.o: pac_corruptor.S
# run on earlier targets and print a meaningful error messages
$(OUTPUT)/pac: pac.c $(OUTPUT)/pac_corruptor.o
$(CC) $^ -o $@ $(CFLAGS) -march=armv8.2-a
-
+endif
> +
> +TEST_GEN_PROGS := pac
> +TEST_GEN_FILES := pac_corruptor.o
> +
> +include ../../lib.mk
> +
> +# pac* and aut* instructions are not available on architectures berfore
> +# ARMv8.3. Therefore target ARMv8.3 wherever they are used directly
> +$(OUTPUT)/pac_corruptor.o: pac_corruptor.S
> + $(CC) -c $^ -o $@ $(CFLAGS) -march=armv8.3-a
> +
> +# when -mbranch-protection is enabled and the target architecture is ARMv8.3 or
> +# greater, gcc emits pac* instructions which are not in HINT NOP space,
> +# preventing the tests from occurring at all. Compile for ARMv8.2 so tests can
> +# run on earlier targets and print a meaningful error messages
> +$(OUTPUT)/pac: pac.c $(OUTPUT)/pac_corruptor.o
> + $(CC) $^ -o $@ $(CFLAGS) -march=armv8.2-a
> +
> diff --git a/tools/testing/selftests/arm64/pauth/helper.h b/tools/testing/selftests/arm64/pauth/helper.h
> new file mode 100644
> index 000000000000..f777f88acf0a
> --- /dev/null
> +++ b/tools/testing/selftests/arm64/pauth/helper.h
> @@ -0,0 +1,10 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/* Copyright (C) 2020 ARM Limited */
> +
> +#ifndef _HELPER_H_
> +#define _HELPER_H_
> +
> +void pac_corruptor(void);
> +
> +#endif
> +
Please delete extra line at end of file here and other places too.
Other changes look fine for me. After the suggested changes please free
to add,
Reviewed-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Thanks,
Amit Daniel
> diff --git a/tools/testing/selftests/arm64/pauth/pac.c b/tools/testing/selftests/arm64/pauth/pac.c
> new file mode 100644
> index 000000000000..ed445050f621
> --- /dev/null
> +++ b/tools/testing/selftests/arm64/pauth/pac.c
> @@ -0,0 +1,32 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (C) 2020 ARM Limited
> +
> +#include <sys/auxv.h>
> +#include <signal.h>
> +
>
next prev parent reply other threads:[~2020-08-31 8:05 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-28 13:16 [PATCH 0/4] kselftests/arm64: add PAuth tests Boyan Karatotev
2020-08-28 13:16 ` [PATCH 1/4] kselftests/arm64: add a basic Pointer Authentication test Boyan Karatotev
2020-08-28 14:28 ` Vincenzo Frascino
2020-08-31 8:05 ` Amit Kachhap [this message]
2020-09-02 16:49 ` Dave Martin
2020-09-03 10:12 ` Boyan Karatotev
2020-09-07 10:23 ` Dave Martin
2020-08-28 13:16 ` [PATCH 2/4] kselftests/arm64: add nop checks for PAuth tests Boyan Karatotev
2020-08-28 14:30 ` Vincenzo Frascino
2020-08-31 8:09 ` Amit Kachhap
2020-08-28 13:16 ` [PATCH 3/4] kselftests/arm64: add PAuth test for whether exec() changes keys Boyan Karatotev
2020-08-28 14:33 ` Vincenzo Frascino
2020-08-31 8:13 ` Amit Kachhap
2020-09-02 17:00 ` Dave Martin
2020-09-03 10:20 ` Boyan Karatotev
2020-09-07 10:27 ` Dave Martin
2020-09-15 15:18 ` Boyan Karatotev
2020-09-16 15:38 ` Dave Martin
2020-08-28 13:16 ` [PATCH 4/4] kselftests/arm64: add PAuth tests for single threaded consistency and key uniqueness Boyan Karatotev
2020-08-28 14:36 ` Vincenzo Frascino
2020-08-31 8:20 ` Amit Kachhap
2020-09-02 16:48 ` [PATCH 0/4] kselftests/arm64: add PAuth tests Dave Martin
2020-09-03 9:46 ` Boyan Karatotev
2020-09-07 10:29 ` Dave Martin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ec48c4c2-7034-ddfe-2120-85e7856dc062@arm.com \
--to=amit.kachhap@arm.com \
--cc=boian4o1@gmail.com \
--cc=boyan.karatotev@arm.com \
--cc=catalin.marinas@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=shuah@kernel.org \
--cc=vincenzo.frascino@arm.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®