From: Chao Yu <yuchao0@huawei.com>
To: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: <linux-f2fs-devel@lists.sourceforge.net>,
<linux-kernel@vger.kernel.org>, <chao@kernel.org>
Subject: Re: [PATCH RFC] f2fs: fix to avoid selecting full segment w/ {AT,}SSR allocator
Date: Fri, 19 Mar 2021 10:31:09 +0800 [thread overview]
Message-ID: <ec5cda53-d3f4-450c-7567-7bfc68e224f9@huawei.com> (raw)
In-Reply-To: <YFOLNGo+/8sKQ7si@google.com>
On 2021/3/19 1:17, Jaegeuk Kim wrote:
> On 02/20, Chao Yu wrote:
>> In cp disabling mode, there could be a condition
>> - target segment has 128 ckpt valid blocks
>> - GC migrates 128 valid blocks to other segment (segment is still in
>> dirty list)
>> - GC migrates 384 blocks to target segment (segment has 128 cp_vblocks
>> and 384 vblocks)
>> - If GC selects target segment via {AT,}SSR allocator, however there is
>> no free space in targe segment.
>>
>> Fixes: 4354994f097d ("f2fs: checkpoint disabling")
>> Fixes: 093749e296e2 ("f2fs: support age threshold based garbage collection")
>> Signed-off-by: Chao Yu <yuchao0@huawei.com>
>> ---
>> fs/f2fs/f2fs.h | 1 +
>> fs/f2fs/gc.c | 17 +++++++++++++----
>> fs/f2fs/segment.c | 20 ++++++++++++++++++++
>> 3 files changed, 34 insertions(+), 4 deletions(-)
>>
>> diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
>> index ed7807103c8e..9c753eff0814 100644
>> --- a/fs/f2fs/f2fs.h
>> +++ b/fs/f2fs/f2fs.h
>> @@ -3376,6 +3376,7 @@ block_t f2fs_get_unusable_blocks(struct f2fs_sb_info *sbi);
>> int f2fs_disable_cp_again(struct f2fs_sb_info *sbi, block_t unusable);
>> void f2fs_release_discard_addrs(struct f2fs_sb_info *sbi);
>> int f2fs_npages_for_summary_flush(struct f2fs_sb_info *sbi, bool for_ra);
>> +bool segment_has_free_slot(struct f2fs_sb_info *sbi, int segno);
>> void f2fs_init_inmem_curseg(struct f2fs_sb_info *sbi);
>> void f2fs_save_inmem_curseg(struct f2fs_sb_info *sbi);
>> void f2fs_restore_inmem_curseg(struct f2fs_sb_info *sbi);
>> diff --git a/fs/f2fs/gc.c b/fs/f2fs/gc.c
>> index 86ba8ed0b8a7..a1d8062cdace 100644
>> --- a/fs/f2fs/gc.c
>> +++ b/fs/f2fs/gc.c
>> @@ -392,10 +392,6 @@ static void add_victim_entry(struct f2fs_sb_info *sbi,
>> if (p->gc_mode == GC_AT &&
>> get_valid_blocks(sbi, segno, true) == 0)
>> return;
>> -
>> - if (p->alloc_mode == AT_SSR &&
>> - get_seg_entry(sbi, segno)->ckpt_valid_blocks == 0)
>> - return;
>> }
>>
>> for (i = 0; i < sbi->segs_per_sec; i++)
>> @@ -736,6 +732,19 @@ static int get_victim_by_default(struct f2fs_sb_info *sbi,
>> if (gc_type == BG_GC && test_bit(secno, dirty_i->victim_secmap))
>> goto next;
>>
>> + if (unlikely(is_sbi_flag_set(sbi, SBI_CP_DISABLED))) {
>> + /*
>> + * to avoid selecting candidate which has below valid
>> + * block distribution:
>> + * partial blocks are valid and all left ones are valid
>> + * in previous checkpoint.
>> + */
>> + if (p.alloc_mode == SSR || p.alloc_mode == AT_SSR) {
>> + if (!segment_has_free_slot(sbi, segno))
>> + goto next;
>
> Do we need to change this to check free_slot instead of get_ckpt_valid_blocks()?
Jaegeuk,
LFS was assigned only for GC case, in this case we are trying to select source
section, rather than target segment for SSR/AT_SSR case, so we don't need to
check free_slot.
- f2fs_gc
- __get_victim
- get_victim(sbi, victim, gc_type, NO_CHECK_TYPE, LFS, 0);
>
> 732 if (unlikely(is_sbi_flag_set(sbi, SBI_CP_DISABLED) &&
> 733 get_ckpt_valid_blocks(sbi, segno) &&
> 734 p.alloc_mode == LFS))
BTW, in LFS mode, GC wants to find source section rather than segment, so we
should change to check valid ckpt blocks in every segment of targe section here?
Thanks,
>
>
>> + }
>> + }
>> +
>> if (is_atgc) {
>> add_victim_entry(sbi, &p, segno);
>> goto next;
>> diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
>> index 2d5a82c4ca15..deaf57e13125 100644
>> --- a/fs/f2fs/segment.c
>> +++ b/fs/f2fs/segment.c
>> @@ -2650,6 +2650,26 @@ static void __refresh_next_blkoff(struct f2fs_sb_info *sbi,
>> seg->next_blkoff++;
>> }
>>
>> +bool segment_has_free_slot(struct f2fs_sb_info *sbi, int segno)
>> +{
>> + struct sit_info *sit = SIT_I(sbi);
>> + struct seg_entry *se = get_seg_entry(sbi, segno);
>> + int entries = SIT_VBLOCK_MAP_SIZE / sizeof(unsigned long);
>> + unsigned long *target_map = SIT_I(sbi)->tmp_map;
>> + unsigned long *ckpt_map = (unsigned long *)se->ckpt_valid_map;
>> + unsigned long *cur_map = (unsigned long *)se->cur_valid_map;
>> + int i, pos;
>> +
>> + down_write(&sit->sentry_lock);
>> + for (i = 0; i < entries; i++)
>> + target_map[i] = ckpt_map[i] | cur_map[i];
>> +
>> + pos = __find_rev_next_zero_bit(target_map, sbi->blocks_per_seg, 0);
>> + up_write(&sit->sentry_lock);
>> +
>> + return pos < sbi->blocks_per_seg;
>> +}
>> +
>> /*
>> * This function always allocates a used segment(from dirty seglist) by SSR
>> * manner, so it should recover the existing segment information of valid blocks
>> --
>> 2.29.2
> .
>
next prev parent reply other threads:[~2021-03-19 2:31 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-20 9:40 Chao Yu
2021-02-22 13:43 ` Chao Yu
2021-02-23 12:26 ` Chao Yu
2021-02-28 5:10 ` Jaegeuk Kim
2021-03-18 17:17 ` Jaegeuk Kim
2021-03-19 2:31 ` Chao Yu [this message]
2021-03-23 22:59 ` Jaegeuk Kim
2021-03-24 3:28 ` Chao Yu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ec5cda53-d3f4-450c-7567-7bfc68e224f9@huawei.com \
--to=yuchao0@huawei.com \
--cc=chao@kernel.org \
--cc=jaegeuk@kernel.org \
--cc=linux-f2fs-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®