Re: [PATCH net-next v4 0/3] net: qualcomm: rmnet: Enable Mapv5

[Alex Elder <elder@ieee.org>]

On 4/22/21 3:02 PM, Sharath Chandra Vurukala wrote:
> This series introduces the MAPv5 packet format.
> 
>    Patch 0 documents the MAPv4/v5.
>    Patch 1 introduces the MAPv5 and the Inline checksum offload for RX/Ingress.
>    Patch 2 introduces the MAPv5 and the Inline checksum offload for TX/Egress.

Was this supposed to be version 5?

I already reviewed version 4.

Please post version 5.  I am going to ignore this series.

					-Alex

> 
>    A new checksum header format is used as part of MAPv5.For RX checksum offload,
>    the checksum is verified by the HW and the validity is marked in the checksum
>    header of MAPv5. For TX, the required metadata is filled up so hardware can
>    compute the checksum.
> 
>    v1->v2:
>    - Fixed the compilation errors, warnings reported by kernel test robot.
>    - Checksum header definition is expanded to support big, little endian
>            formats as mentioned by Jakub.
> 
>    v2->v3:
>    - Fixed compilation errors reported by kernel bot for big endian flavor.
> 
>    v3->v4:
>    - Made changes to use masks instead of C bit-fields as suggested by Jakub/Alex.
> 
> Sharath Chandra Vurukala (3):
>    docs: networking: Add documentation for MAPv5
>    net: ethernet: rmnet: Support for ingress MAPv5 checksum offload
>    net: ethernet: rmnet: Add support for MAPv5 egress packets
> 
>   .../device_drivers/cellular/qualcomm/rmnet.rst     | 126 +++++++++++++++--
>   drivers/net/ethernet/qualcomm/rmnet/rmnet_config.h |   4 +-
>   .../net/ethernet/qualcomm/rmnet/rmnet_handlers.c   |  29 ++--
>   drivers/net/ethernet/qualcomm/rmnet/rmnet_map.h    |  11 +-
>   .../net/ethernet/qualcomm/rmnet/rmnet_map_data.c   | 151 ++++++++++++++++++++-
>   drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c    |   3 +-
>   include/linux/if_rmnet.h                           |  27 +++-
>   include/uapi/linux/if_link.h                       |   2 +
>   8 files changed, 318 insertions(+), 35 deletions(-)
>