mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Andrzej Hajda <andrzej.hajda@intel.com>
To: Javier Martinez Canillas <javierm@redhat.com>,
	<linux-kernel@vger.kernel.org>
Cc: <linux-fbdev@vger.kernel.org>,
	Daniel Vetter <daniel.vetter@ffwll.ch>,
	Helge Deller <deller@gmx.de>, <dri-devel@lists.freedesktop.org>,
	Peter Jones <pjones@redhat.com>,
	Thomas Zimmermann <tzimmermann@suse.de>
Subject: Re: [PATCH v3 3/4] fbdev: efifb: Cleanup fb_info in .fb_destroy rather than .remove
Date: Fri, 6 May 2022 15:07:32 +0200	[thread overview]
Message-ID: <ed57ca49-f80e-9bf5-4dc3-59fb62ca4315@intel.com> (raw)
In-Reply-To: <20220505220540.366218-1-javierm@redhat.com>

On 06.05.2022 00:05, Javier Martinez Canillas wrote:
> The driver is calling framebuffer_release() in its .remove callback, but
> this will cause the struct fb_info to be freed too early. Since it could
> be that a reference is still hold to it if user-space opened the fbdev.
> 
> This would lead to a use-after-free error if the framebuffer device was
> unregistered but later a user-space process tries to close the fbdev fd.
> 
> To prevent this, move the framebuffer_release() call to fb_ops.fb_destroy
> instead of doing it in the driver's .remove callback.
> 
> Strictly speaking, the code flow in the driver is still wrong because all
> the hardware cleanupd (i.e: iounmap) should be done in .remove while the
> software cleanup (i.e: releasing the framebuffer) should be done in the
> .fb_destroy handler. But this at least makes to match the behavior before
> commit 27599aacbaef ("fbdev: Hot-unplug firmware fb devices on forced removal").
> 
> Fixes: 27599aacbaef ("fbdev: Hot-unplug firmware fb devices on forced removal")
> Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
> ---
> 
> (no changes since v1)
> 
>   drivers/video/fbdev/efifb.c | 9 ++++++++-
>   1 file changed, 8 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/video/fbdev/efifb.c b/drivers/video/fbdev/efifb.c
> index ea42ba6445b2..cfa3dc0b4eee 100644
> --- a/drivers/video/fbdev/efifb.c
> +++ b/drivers/video/fbdev/efifb.c
> @@ -243,6 +243,10 @@ static void efifb_show_boot_graphics(struct fb_info *info)
>   static inline void efifb_show_boot_graphics(struct fb_info *info) {}
>   #endif
>   
> +/*
> + * fb_ops.fb_destroy is called by the last put_fb_info() call at the end
> + * of unregister_framebuffer() or fb_release(). Do any cleanup here.
> + */
>   static void efifb_destroy(struct fb_info *info)
>   {
>   	if (efifb_pci_dev)
> @@ -254,6 +258,9 @@ static void efifb_destroy(struct fb_info *info)
>   		else
>   			memunmap(info->screen_base);
>   	}
> +
> +	framebuffer_release(info);
> +
>   	if (request_mem_succeeded)
>   		release_mem_region(info->apertures->ranges[0].base,
>   				   info->apertures->ranges[0].size);

You are releasing info, then you are using it.

I suspect it is responsible for multiple failures of Intel CI [1].

[1]: 
http://gfx-ci.fi.intel.com/tree/drm-tip/CI_DRM_11615/fi-adl-ddr5/boot0.txt

Regards
Andrzej


> @@ -620,9 +627,9 @@ static int efifb_remove(struct platform_device *pdev)
>   {
>   	struct fb_info *info = platform_get_drvdata(pdev);
>   
> +	/* efifb_destroy takes care of info cleanup */
>   	unregister_framebuffer(info);
>   	sysfs_remove_groups(&pdev->dev.kobj, efifb_groups);
> -	framebuffer_release(info);
>   
>   	return 0;
>   }


  reply	other threads:[~2022-05-06 13:07 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-05 21:59 [PATCH v3 0/4] fbdev: Fix use-after-free caused by wrong fb_info cleanup in drivers Javier Martinez Canillas
2022-05-05 22:04 ` [PATCH v3 1/4] fbdev: Prevent possible use-after-free in fb_release() Javier Martinez Canillas
2022-05-09 14:56   ` Andrzej Hajda
2022-05-09 15:30     ` Javier Martinez Canillas
2022-05-09 15:51       ` Andrzej Hajda
2022-05-09 16:33         ` Javier Martinez Canillas
2022-05-09 18:12           ` Thomas Zimmermann
2022-05-09 20:03             ` Javier Martinez Canillas
2022-05-09 22:22               ` Andrzej Hajda
2022-05-09 22:42                 ` Javier Martinez Canillas
2022-05-10  7:19                   ` Andrzej Hajda
2022-05-10  7:50                     ` Javier Martinez Canillas
2022-05-11 13:18                       ` Daniel Vetter
2022-05-10  8:04                   ` Thomas Zimmermann
2022-05-10  8:30                     ` Javier Martinez Canillas
2022-05-10  8:37                       ` Thomas Zimmermann
2022-05-10  8:50                         ` Thomas Zimmermann
2022-05-10  9:06                           ` Javier Martinez Canillas
2022-05-10  9:39                             ` Thomas Zimmermann
2022-05-10  9:44                               ` Javier Martinez Canillas
2022-05-09 18:32           ` Thomas Zimmermann
2022-05-09 20:00             ` Javier Martinez Canillas
2022-05-11 13:15               ` Daniel Vetter
2022-05-05 22:04 ` [PATCH v3 2/4] fbdev: simplefb: Cleanup fb_info in .fb_destroy rather than .remove Javier Martinez Canillas
2022-05-05 22:05 ` [PATCH v3 3/4] fbdev: efifb: " Javier Martinez Canillas
2022-05-06 13:07   ` Andrzej Hajda [this message]
2022-05-06 13:18     ` Javier Martinez Canillas
2022-05-08 15:40   ` [fbdev] c6a2b1a999: BUG:KASAN:use-after-free_in_efifb_destroy kernel test robot
2022-05-05 22:06 ` [PATCH v3 4/4] fbdev: vesafb: Cleanup fb_info in .fb_destroy rather than .remove Javier Martinez Canillas
2022-05-06  7:34 ` [PATCH v3 0/4] fbdev: Fix use-after-free caused by wrong fb_info cleanup in drivers Javier Martinez Canillas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ed57ca49-f80e-9bf5-4dc3-59fb62ca4315@intel.com \
    --to=andrzej.hajda@intel.com \
    --cc=daniel.vetter@ffwll.ch \
    --cc=deller@gmx.de \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=javierm@redhat.com \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pjones@redhat.com \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®