Re: [PATCH v5 1/1] scsi: ufs: core: Support Updating UIC Command Timeout

["Peter Wang (王信友)" <peter.wang@mediatek.com>]

On Tue, 2024-07-23 at 20:49 -0700, Bao D. Nguyen wrote:
>  	 
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
>  The default UIC command timeout still remains 500ms.
> Allow platform drivers to override the UIC command
> timeout if desired.
> 
> In a real product, the 500ms timeout value is probably good enough.
> However, during the product development where there are a lot of
> logging and debug messages being printed to the uart console,
> interrupt starvations happen occasionally because the uart may
> print long debug messages from different modules in the system.
> While printing, the uart may have interrupts disabled for more
> than 500ms, causing UIC command timeout.
> The UIC command timeout would trigger more printing from
> the UFS driver, and eventually a watchdog timeout may
> occur unnecessarily.
> 
> Add support for overriding the UIC command timeout value
> with the newly created uic_cmd_timeout kernel module parameter.
> Default value is 500ms. Supported values range from 500ms
> to 2 seconds.
> 
> Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
> Suggested-by: Bart Van Assche <bvanassche@acm.org>
> Reviewed-by: Bart Van Assche <bvanassche@acm.org>
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>  drivers/ufs/core/ufshcd.c | 29 ++++++++++++++++++++++++-----
>  1 file changed, 24 insertions(+), 5 deletions(-)
> 

Reviewed-by: Peter Wang <peter.wang@mediatek.com>