From: Matthias Brugger <matthias.bgg@gmail.com>
To: Pablo Sun <pablo.sun@mediatek.com>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org
Subject: Re: [PATCH v2] arm64: dts: mediatek: mt8395-genio-1200-evk: Enable GPU
Date: Fri, 13 Sep 2024 13:34:49 +0200 [thread overview]
Message-ID: <edf25359-1804-445d-bd49-45c7238a3cd5@gmail.com> (raw)
In-Reply-To: <20240912070624.25540-1-pablo.sun@mediatek.com>
On 12/09/2024 09:06, Pablo Sun wrote:
> Enable the Mali Valhall GPU on Genio 1200 EVK by providing regulator
> supply settingsi to gpu and mfg1, and enable the GPU node.
>
> In addition, set the GPU related regulator voltage range:
>
> 1. Set the recommended input voltage range of DVDD_GPU to (0.546V-0.787V),
> based on Table 5-3 of MT8395 Application Processor Datasheet.
> The regulator mt6315_7_vbuck1("Vgpu") connects to the DVDD_GPU input.
> Note that the minimum voltage in SoC eFuse data, which is read by
> MTK-SVS to adjust the regulator voltage, does not go below
> the recommended operating voltage in the datasheet.
>
> 2. Set the input voltage of DVDD_SRAM_GPU, supplied by
> mt6359_vsram_others_ldo_reg, to 0.75V, the recommended typical
> operating voltage in MT8395 Application Processor Datasheet.
>
> This patch is tested by enabling CONFIG_DRM_PANFROST and
> on Genio 1200 EVK it probed with following dmesg:
>
> ```
> panfrost 13000000.gpu: clock rate = 700000092
> panfrost 13000000.gpu: mali-g57 id 0x9093 major 0x0 minor 0x1 status 0x0
> panfrost 13000000.gpu: features: 00000000,000019f7,
> issues: 00000001,80000400
> panfrost 13000000.gpu: Features: L2:0x07120206 Shader:0x00000000
> Tiler:0x00000809 Mem:0x301
> MMU:0x00002830 AS:0xff JS:0x7
> panfrost 13000000.gpu: shader_present=0x50045 l2_present=0x1
> [drm] Initialized panfrost 1.2.0 for 13000000.gpu on minor 0
> ```
>
> Signed-off-by: Pablo Sun <pablo.sun@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
> ---
> .../dts/mediatek/mt8395-genio-1200-evk.dts | 19 +++++++++++++++++--
> 1 file changed, 17 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
> index a06610fff8ad..4f7d66d6d785 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
> @@ -194,6 +194,11 @@ eth_phy0: eth-phy0@1 {
> };
> };
>
> +&gpu {
> + mali-supply = <&mt6315_7_vbuck1>;
> + status = "okay";
> +};
> +
> &i2c0 {
> clock-frequency = <400000>;
> pinctrl-0 = <&i2c0_pins>;
> @@ -337,6 +342,10 @@ &mfg0 {
> domain-supply = <&mt6315_7_vbuck1>;
> };
>
> +&mfg1 {
> + domain-supply = <&mt6359_vsram_others_ldo_reg>;
> +};
> +
> &mmc0 {
> status = "okay";
> pinctrl-names = "default", "state_uhs";
> @@ -407,6 +416,12 @@ &mt6359_vrf12_ldo_reg {
> regulator-always-on;
> };
>
> +/* for GPU SRAM */
> +&mt6359_vsram_others_ldo_reg {
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <750000>;
> +};
> +
> &mt6359codec {
> mediatek,mic-type-0 = <1>; /* ACC */
> mediatek,mic-type-1 = <3>; /* DCC */
> @@ -839,8 +854,8 @@ regulators {
> mt6315_7_vbuck1: vbuck1 {
> regulator-compatible = "vbuck1";
> regulator-name = "Vgpu";
> - regulator-min-microvolt = <300000>;
> - regulator-max-microvolt = <1193750>;
> + regulator-min-microvolt = <546000>;
> + regulator-max-microvolt = <787000>;
> regulator-enable-ramp-delay = <256>;
> regulator-allowed-modes = <0 1 2>;
> };
next prev parent reply other threads:[~2024-09-13 11:34 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-12 7:06 Pablo Sun
2024-09-12 12:11 ` AngeloGioacchino Del Regno
2024-09-12 15:39 ` Rob Herring (Arm)
2024-09-13 11:34 ` Matthias Brugger [this message]
2024-10-02 9:33 ` AngeloGioacchino Del Regno
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=edf25359-1804-445d-bd49-45c7238a3cd5@gmail.com \
--to=matthias.bgg@gmail.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=pablo.sun@mediatek.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®