[GIT PULL] SCSI fixes for 6.12-rc2

[James Bottomley <James.Bottomley@HansenPartnership.com>]

four small fixes, three in drivers and one in the FC transport class to
add idempotence to state setting.

The patch is available here:

git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes

The short changelog is:

Avri Altman (1):
      scsi: ufs: Use pre-calculated offsets in ufshcd_init_lrb()

Benjamin Marzinski (1):
      scsi: scsi_transport_fc: Allow setting rport state to current state

Daniel Palmer (1):
      scsi: wd33c93: Don't use stale scsi_pointer value

Martin Wilck (1):
      scsi: fnic: Move flush_work initialization out of if block


And the diffstat:

 drivers/scsi/fnic/fnic_main.c    | 2 +-
 drivers/scsi/scsi_transport_fc.c | 4 ++--
 drivers/scsi/wd33c93.c           | 2 +-
 drivers/ufs/core/ufshcd.c        | 5 ++---
 4 files changed, 6 insertions(+), 7 deletions(-)

With full diff below.

James

---

diff --git a/drivers/scsi/fnic/fnic_main.c b/drivers/scsi/fnic/fnic_main.c
index 0044717d4486..adec0df24bc4 100644
--- a/drivers/scsi/fnic/fnic_main.c
+++ b/drivers/scsi/fnic/fnic_main.c
@@ -830,7 +830,6 @@ static int fnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		spin_lock_init(&fnic->vlans_lock);
 		INIT_WORK(&fnic->fip_frame_work, fnic_handle_fip_frame);
 		INIT_WORK(&fnic->event_work, fnic_handle_event);
-		INIT_WORK(&fnic->flush_work, fnic_flush_tx);
 		skb_queue_head_init(&fnic->fip_frame_queue);
 		INIT_LIST_HEAD(&fnic->evlist);
 		INIT_LIST_HEAD(&fnic->vlans);
@@ -948,6 +947,7 @@ static int fnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	INIT_WORK(&fnic->link_work, fnic_handle_link);
 	INIT_WORK(&fnic->frame_work, fnic_handle_frame);
+	INIT_WORK(&fnic->flush_work, fnic_flush_tx);
 	skb_queue_head_init(&fnic->frame_queue);
 	skb_queue_head_init(&fnic->tx_queue);
 
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index 62ea7e44460e..082f76e76721 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -1250,7 +1250,7 @@ static ssize_t fc_rport_set_marginal_state(struct device *dev,
 		 */
 		if (rport->port_state == FC_PORTSTATE_ONLINE)
 			rport->port_state = port_state;
-		else
+		else if (port_state != rport->port_state)
 			return -EINVAL;
 	} else if (port_state == FC_PORTSTATE_ONLINE) {
 		/*
@@ -1260,7 +1260,7 @@ static ssize_t fc_rport_set_marginal_state(struct device *dev,
 		 */
 		if (rport->port_state == FC_PORTSTATE_MARGINAL)
 			rport->port_state = port_state;
-		else
+		else if (port_state != rport->port_state)
 			return -EINVAL;
 	} else
 		return -EINVAL;
diff --git a/drivers/scsi/wd33c93.c b/drivers/scsi/wd33c93.c
index a44b60c9004a..dd1fef9226f2 100644
--- a/drivers/scsi/wd33c93.c
+++ b/drivers/scsi/wd33c93.c
@@ -831,7 +831,7 @@ wd33c93_intr(struct Scsi_Host *instance)
 		/* construct an IDENTIFY message with correct disconnect bit */
 
 		hostdata->outgoing_msg[0] = IDENTIFY(0, cmd->device->lun);
-		if (scsi_pointer->phase)
+		if (WD33C93_scsi_pointer(cmd)->phase)
 			hostdata->outgoing_msg[0] |= 0x40;
 
 		if (hostdata->sync_stat[cmd->device->id] == SS_FIRST) {
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index 24a32e2fd75e..6a71ebf953e2 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -2933,9 +2933,8 @@ static void ufshcd_init_lrb(struct ufs_hba *hba, struct ufshcd_lrb *lrb, int i)
 	struct utp_transfer_req_desc *utrdlp = hba->utrdl_base_addr;
 	dma_addr_t cmd_desc_element_addr = hba->ucdl_dma_addr +
 		i * ufshcd_get_ucd_size(hba);
-	u16 response_offset = offsetof(struct utp_transfer_cmd_desc,
-				       response_upiu);
-	u16 prdt_offset = offsetof(struct utp_transfer_cmd_desc, prd_table);
+	u16 response_offset = le16_to_cpu(utrdlp[i].response_upiu_offset);
+	u16 prdt_offset = le16_to_cpu(utrdlp[i].prd_table_offset);
 
 	lrb->utr_descriptor_ptr = utrdlp + i;
 	lrb->utrd_dma_addr = hba->utrdl_dma_addr +