From: Adrian Hunter <adrian.hunter@intel.com>
To: Victor Shih <victorshihgli@gmail.com>, ulf.hansson@linaro.org
Cc: linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
benchuanggli@gmail.com, HL.Liu@genesyslogic.com.tw,
Greg.tu@genesyslogic.com.tw, takahiro.akashi@linaro.org,
dlunev@chromium.org,
Victor Shih <victor.shih@genesyslogic.com.tw>,
Ben Chuang <ben.chuang@genesyslogic.com.tw>
Subject: Re: [PATCH V7 13/23] mmc: sdhci-uhs2: add set_timeout()
Date: Wed, 12 Apr 2023 16:10:31 +0300 [thread overview]
Message-ID: <ef06dc89-2de2-7607-2938-a5d76875310b@intel.com> (raw)
In-Reply-To: <20230331105546.13607-14-victor.shih@genesyslogic.com.tw>
On 31/03/23 13:55, Victor Shih wrote:
> This is a UHS-II version of sdhci's set_timeout() operation.
>
> Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
> ---
> drivers/mmc/host/sdhci-uhs2.c | 72 +++++++++++++++++++++++++++++++++++
> drivers/mmc/host/sdhci-uhs2.h | 1 +
> 2 files changed, 73 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c
> index 388d87537847..e2e9ce51b768 100644
> --- a/drivers/mmc/host/sdhci-uhs2.c
> +++ b/drivers/mmc/host/sdhci-uhs2.c
> @@ -13,6 +13,7 @@
> #include <linux/delay.h>
> #include <linux/module.h>
> #include <linux/iopoll.h>
> +#include <linux/bitfield.h>
>
> #include "sdhci.h"
> #include "sdhci-uhs2.h"
> @@ -144,6 +145,77 @@ static void sdhci_uhs2_set_power(struct sdhci_host *host, unsigned char mode,
> }
> }
>
> +static u8 sdhci_calc_timeout_uhs2(struct sdhci_host *host, u8 *cmd_res, u8 *dead_lock)
> +{
> + u8 count;
> + unsigned int cmd_res_timeout, dead_lock_timeout, current_timeout;
> + /* timeout in us */
> + cmd_res_timeout = 5 * 1000;
> + dead_lock_timeout = 1 * 1000 * 1000;
Initialization should be combined with declaration,
and by descending line length looks neater i.e.
unsigned int dead_lock_timeout = 1 * 1000 * 1000;
unsigned int cmd_res_timeout = 5 * 1000;
unsigned int current_timeout;
u8 count;
> +
> + /*
> + * Figure out needed cycles.
> + * We do this in steps in order to fit inside a 32 bit int.
> + * The first step is the minimum timeout, which will have a
> + * minimum resolution of 6 bits:
> + * (1) 2^13*1000 > 2^22,
> + * (2) host->timeout_clk < 2^16
> + * =>
> + * (1) / (2) > 2^6
> + */
> + count = 0;
> + current_timeout = (1 << 13) * 1000 / host->timeout_clk;
> + while (current_timeout < cmd_res_timeout) {
> + count++;
> + current_timeout <<= 1;
> + if (count >= 0xF)
> + break;
> + }
> +
> + if (count >= 0xF) {
> + DBG("%s: Too large timeout 0x%x requested for CMD_RES!\n",
> + mmc_hostname(host->mmc), count);
> + count = 0xE;
> + }
> + *cmd_res = count;
> +
> + count = 0;
> + current_timeout = (1 << 13) * 1000 / host->timeout_clk;
> + while (current_timeout < dead_lock_timeout) {
> + count++;
> + current_timeout <<= 1;
> + if (count >= 0xF)
> + break;
> + }
> +
> + if (count >= 0xF) {
> + DBG("%s: Too large timeout 0x%x requested for DEADLOCK!\n",
> + mmc_hostname(host->mmc), count);
> + count = 0xE;
> + }
> + *dead_lock = count;
> +
> + return count;
> +}
> +
> +static void __sdhci_uhs2_set_timeout(struct sdhci_host *host)
> +{
> + u8 cmd_res, dead_lock;
> +
> + sdhci_calc_timeout_uhs2(host, &cmd_res, &dead_lock);
> + cmd_res |= FIELD_PREP(SDHCI_UHS2_TIMER_CTRL_DEADLOCK_MASK, dead_lock);
> + sdhci_writeb(host, cmd_res, SDHCI_UHS2_TIMER_CTRL);
> +}
> +
> +void sdhci_uhs2_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
> +{
> + __sdhci_set_timeout(host, cmd);
> +
> + if (sdhci_uhs2_mode(host))
> + __sdhci_uhs2_set_timeout(host);
> +}
> +EXPORT_SYMBOL_GPL(sdhci_uhs2_set_timeout);
> +
> /*****************************************************************************\
> * *
> * MMC callbacks *
> diff --git a/drivers/mmc/host/sdhci-uhs2.h b/drivers/mmc/host/sdhci-uhs2.h
> index 6834893eee85..fc03a178b676 100644
> --- a/drivers/mmc/host/sdhci-uhs2.h
> +++ b/drivers/mmc/host/sdhci-uhs2.h
> @@ -180,5 +180,6 @@ struct sdhci_host;
> void sdhci_uhs2_dump_regs(struct sdhci_host *host);
> bool sdhci_uhs2_mode(struct sdhci_host *host);
> void sdhci_uhs2_reset(struct sdhci_host *host, u16 mask);
> +void sdhci_uhs2_set_timeout(struct sdhci_host *host, struct mmc_command *cmd);
Really should forward declare 'struct mmc_command' as was done
for 'struct sdhci_host'
>
> #endif /* __SDHCI_UHS2_H */
next prev parent reply other threads:[~2023-04-12 13:11 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-31 10:55 [PATCH V7 00/23] Add support UHS-II for GL9755 Victor Shih
2023-03-31 10:55 ` [PATCH V7 01/23] mmc: core: Cleanup printing of speed mode at card insertion Victor Shih
2023-03-31 10:55 ` [PATCH V7 02/23] mmc: core: Prepare to support SD UHS-II cards Victor Shih
2023-03-31 10:55 ` [PATCH V7 03/23] mmc: core: Announce successful insertion of an SD UHS-II card Victor Shih
2023-03-31 10:55 ` [PATCH V7 04/23] mmc: core: Extend support for mmc regulators with a vqmmc2 Victor Shih
2023-03-31 10:55 ` [PATCH V7 05/23] mmc: core: Add definitions for SD UHS-II cards Victor Shih
2023-03-31 10:55 ` [PATCH V7 06/23] mmc: core: Support UHS-II card control and access Victor Shih
2023-04-12 13:09 ` Adrian Hunter
2023-06-21 10:27 ` Victor Shih
2023-03-31 10:55 ` [PATCH V7 07/23] mmc: sdhci: add UHS-II related definitions in headers Victor Shih
2023-04-12 13:09 ` Adrian Hunter
2023-06-21 10:27 ` Victor Shih
2023-03-31 10:55 ` [PATCH V7 08/23] mmc: sdhci: add UHS-II module and add a kernel configuration Victor Shih
2023-04-12 13:09 ` Adrian Hunter
2023-06-21 10:28 ` Victor Shih
2023-03-31 10:55 ` [PATCH V7 09/23] mmc: sdhci-uhs2: dump UHS-II registers Victor Shih
2023-03-31 10:55 ` [PATCH V7 10/23] mmc: sdhci-uhs2: add reset function and uhs2_mode function Victor Shih
2023-04-12 13:10 ` Adrian Hunter
2023-06-21 10:28 ` Victor Shih
2023-03-31 10:55 ` [PATCH V7 11/23] mmc: sdhci-uhs2: add set_power() to support vdd2 Victor Shih
2023-04-12 13:10 ` Adrian Hunter
2023-06-21 10:28 ` Victor Shih
2023-03-31 10:55 ` [PATCH V7 12/23] mmc: sdhci-uhs2: skip signal_voltage_switch() Victor Shih
2023-03-31 10:55 ` [PATCH V7 13/23] mmc: sdhci-uhs2: add set_timeout() Victor Shih
2023-04-12 13:10 ` Adrian Hunter [this message]
2023-06-21 10:29 ` Victor Shih
2023-03-31 10:55 ` [PATCH V7 14/23] mmc: sdhci-uhs2: add set_ios() Victor Shih
2023-04-12 13:10 ` Adrian Hunter
2023-06-21 10:29 ` Victor Shih
2023-03-31 10:55 ` [PATCH V7 15/23] mmc: sdhci-uhs2: add detect_init() to detect the interface Victor Shih
2023-04-12 13:11 ` Adrian Hunter
2023-06-21 10:29 ` Victor Shih
2023-03-31 10:55 ` [PATCH V7 16/23] mmc: sdhci-uhs2: add clock operations Victor Shih
2023-04-12 13:11 ` Adrian Hunter
2023-06-21 10:29 ` Victor Shih
2023-03-31 10:55 ` [PATCH V7 17/23] mmc: sdhci-uhs2: add uhs2_control() to initialise the interface Victor Shih
2023-04-12 13:11 ` Adrian Hunter
2023-06-21 10:29 ` Victor Shih
2023-03-31 10:55 ` [PATCH V7 18/23] mmc: sdhci-uhs2: add request() and others Victor Shih
2023-04-12 13:11 ` Adrian Hunter
2023-06-21 10:30 ` Victor Shih
2023-03-31 10:55 ` [PATCH V7 19/23] mmc: sdhci-uhs2: add irq() " Victor Shih
2023-04-12 13:12 ` Adrian Hunter
2023-06-21 10:30 ` Victor Shih
2023-03-31 10:55 ` [PATCH V7 20/23] mmc: sdhci-uhs2: add add_host() and others to set up the driver Victor Shih
2023-04-12 13:12 ` Adrian Hunter
2023-06-21 10:30 ` Victor Shih
2023-03-31 10:55 ` [PATCH V7 21/23] mmc: sdhci-uhs2: add pre-detect_init hook Victor Shih
2023-03-31 10:55 ` [PATCH V7 22/23] mmc: sdhci-pci: add UHS-II support framework Victor Shih
2023-04-12 13:12 ` Adrian Hunter
2023-06-21 10:30 ` Victor Shih
2023-03-31 10:55 ` [PATCH V7 23/23] mmc: sdhci-pci-gli: enable UHS-II mode for GL9755 Victor Shih
2023-04-12 13:13 ` Adrian Hunter
2023-06-21 10:30 ` Victor Shih
2023-06-07 10:17 ` [PATCH V7 00/23] Add support UHS-II " Victor Shih
2023-06-14 16:06 ` Ulf Hansson
2023-06-21 10:33 ` Victor Shih
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ef06dc89-2de2-7607-2938-a5d76875310b@intel.com \
--to=adrian.hunter@intel.com \
--cc=Greg.tu@genesyslogic.com.tw \
--cc=HL.Liu@genesyslogic.com.tw \
--cc=ben.chuang@genesyslogic.com.tw \
--cc=benchuanggli@gmail.com \
--cc=dlunev@chromium.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=takahiro.akashi@linaro.org \
--cc=ulf.hansson@linaro.org \
--cc=victor.shih@genesyslogic.com.tw \
--cc=victorshihgli@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®