mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Alexander Sverdlin <alexander.sverdlin@nokia.com>
To: Krzysztof Adamski <krzysztof.adamski@nokia.com>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Peter Collingbourne <pcc@google.com>,
	Guenter Roeck <linux@roeck-us.net>,
	Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Matija Glavinic-Pecotic <matija.glavinic-pecotic.ext@nokia.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] arm64: move efi_reboot to restart handler
Date: Fri, 28 Jan 2022 15:21:30 +0100	[thread overview]
Message-ID: <f0575d3c-15a0-8a33-9fbd-8ebe1be33034@nokia.com> (raw)
In-Reply-To: <YfP0osb45uJldtM9@localhost.localdomain>

Hi!

On 28/01/2022 14:50, Krzysztof Adamski wrote:
> On EFI enabled arm64 systems, efi_reboot was called before
> do_kernel_restart, completely omitting the reset_handlers functionality.
> By registering efi_reboot as part of the chain with slightly elevated
> priority, we make it run before the default handler but still allow
> plugging in other handlers.
> Thanks to that, things like gpio_restart, restart handlers in
> watchdog_core, mmc or mtds are working on those platforms.
> 
> The priority 130 is one higher than PSCI, to overrule that but still
> allow to easily register higher prio handlers, if needed.
> 
> Signed-off-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>

Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>

> ---
> 
> Changes in v2:
>   - Register the handler in EFI code, instead of arm64 setup.c
>   - Remove the contdition from the handler - it should be run in all
>     cases when it is registered
>   - Bump the priority to 130 to make it completly obious this should be
>     run before PSCI (which has priority of 129)
> 
>  arch/arm64/kernel/process.c        |  7 -------
>  drivers/firmware/efi/arm-runtime.c | 21 +++++++++++++++++++++
>  2 files changed, 21 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
> index 5369e649fa79..b86ef77bb0c8 100644
> --- a/arch/arm64/kernel/process.c
> +++ b/arch/arm64/kernel/process.c
> @@ -130,13 +130,6 @@ void machine_restart(char *cmd)
>  	local_irq_disable();
>  	smp_send_stop();
>  
> -	/*
> -	 * UpdateCapsule() depends on the system being reset via
> -	 * ResetSystem().
> -	 */
> -	if (efi_enabled(EFI_RUNTIME_SERVICES))
> -		efi_reboot(reboot_mode, NULL);
> -
>  	/* Now call the architecture specific reboot code. */
>  	do_kernel_restart(cmd);
>  
> diff --git a/drivers/firmware/efi/arm-runtime.c b/drivers/firmware/efi/arm-runtime.c
> index 3359ae2adf24..b9a2cdbe80b4 100644
> --- a/drivers/firmware/efi/arm-runtime.c
> +++ b/drivers/firmware/efi/arm-runtime.c
> @@ -80,6 +80,24 @@ static bool __init efi_virtmap_init(void)
>  	return true;
>  }
>  
> +static int efi_restart(struct notifier_block *nb, unsigned long action,
> +		       void *data)
> +{
> +	/*
> +	 * UpdateCapsule() depends on the system being reset via
> +	 * ResetSystem().
> +	 */
> +	efi_reboot(reboot_mode, NULL);
> +
> +	return NOTIFY_DONE;
> +}
> +
> +static struct notifier_block efi_restart_nb = {
> +	.notifier_call = efi_restart,
> +	/* We want this to take priority over PSCI which has priority of 129. */
> +	.priority = 130,
> +};
> +
>  /*
>   * Enable the UEFI Runtime Services if all prerequisites are in place, i.e.,
>   * non-early mapping of the UEFI system table and virtual mappings for all
> @@ -148,6 +166,9 @@ static int __init arm_enable_runtime_services(void)
>  	efi_native_runtime_setup();
>  	set_bit(EFI_RUNTIME_SERVICES, &efi.flags);
>  
> +	if (IS_ENABLED(CONFIG_ARM64))
> +		register_restart_handler(&efi_restart_nb);
> +
>  	return 0;
>  }
>  early_initcall(arm_enable_runtime_services);

-- 
Best regards,
Alexander Sverdlin.

  reply	other threads:[~2022-01-28 14:21 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-28 13:50 Krzysztof Adamski
2022-01-28 14:21 ` Alexander Sverdlin [this message]
2022-01-28 15:14 ` Guenter Roeck
2022-01-28 16:01 ` Mark Rutland
2022-01-28 22:05   ` Krzysztof Adamski
2022-02-01 13:58     ` Mark Rutland
2022-02-02 12:40       ` Krzysztof Adamski
2022-02-02 14:01         ` Ard Biesheuvel
2022-02-02 16:47           ` Krzysztof Adamski
2022-02-02 17:52             ` Krzysztof Adamski
2022-02-15  8:44           ` Alexander Sverdlin
2022-02-15  8:44       ` Alexander Sverdlin
2022-02-15 14:30         ` Guenter Roeck
2022-02-15 15:01           ` Krzysztof Adamski
2022-02-15 16:57             ` Guenter Roeck
2022-02-15 17:03               ` Ard Biesheuvel
2022-02-16  9:11                 ` Krzysztof Adamski
2022-01-28 19:29 ` Wolfram Sang
2022-01-28 22:32   ` Krzysztof Adamski
2022-01-29  6:38     ` Wolfram Sang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f0575d3c-15a0-8a33-9fbd-8ebe1be33034@nokia.com \
    --to=alexander.sverdlin@nokia.com \
    --cc=catalin.marinas@arm.com \
    --cc=krzysztof.adamski@nokia.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=mark.rutland@arm.com \
    --cc=matija.glavinic-pecotic.ext@nokia.com \
    --cc=pcc@google.com \
    --cc=will@kernel.org \
    --cc=wsa+renesas@sang-engineering.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®