Re: [PATCH vhost v2 00/10] vdpa/mlx5: Parallelize device suspend/resume

[Dragos Tatulea <dtatulea@nvidia.com>]

On 03.09.24 10:10, Eugenio Perez Martin wrote:
> On Tue, Sep 3, 2024 at 9:48 AM Dragos Tatulea <dtatulea@nvidia.com> wrote:
>>
>>
>>
>> On 03.09.24 09:40, Lei Yang wrote:
>>> On Mon, Sep 2, 2024 at 7:05 PM Dragos Tatulea <dtatulea@nvidia.com> wrote:
>>>>
>>>> Hi Lei,
>>>>
>>>> On 02.09.24 12:03, Lei Yang wrote:
>>>>> Hi Dragos
>>>>>
>>>>> QE tested this series with mellanox nic, it failed with [1] when
>>>>> booting guest, and host dmesg also will print messages [2]. This bug
>>>>> can be reproduced boot guest with vhost-vdpa device.
>>>>>
>>>>> [1] qemu) qemu-kvm: vhost VQ 1 ring restore failed: -1: Operation not
>>>>> permitted (1)
>>>>> qemu-kvm: vhost VQ 0 ring restore failed: -1: Operation not permitted (1)
>>>>> qemu-kvm: unable to start vhost net: 5: falling back on userspace virtio
>>>>> qemu-kvm: vhost_set_features failed: Device or resource busy (16)
>>>>> qemu-kvm: unable to start vhost net: 16: falling back on userspace virtio
>>>>>
>>>>> [2] Host dmesg:
>>>>> [ 1406.187977] mlx5_core 0000:0d:00.2:
>>>>> mlx5_vdpa_compat_reset:3267:(pid 8506): performing device reset
>>>>> [ 1406.189221] mlx5_core 0000:0d:00.2:
>>>>> mlx5_vdpa_compat_reset:3267:(pid 8506): performing device reset
>>>>> [ 1406.190354] mlx5_core 0000:0d:00.2:
>>>>> mlx5_vdpa_show_mr_leaks:573:(pid 8506) warning: mkey still alive after
>>>>> resource delete: mr: 000000000c5ccca2, mkey: 0x40000000, refcount: 2
>>>>> [ 1471.538487] mlx5_core 0000:0d:00.2: cb_timeout_handler:938:(pid
>>>>> 428): cmd[13]: MODIFY_GENERAL_OBJECT(0xa01) Async, timeout. Will cause
>>>>> a leak of a command resource
>>>>> [ 1471.539486] mlx5_core 0000:0d:00.2: cb_timeout_handler:938:(pid
>>>>> 428): cmd[12]: MODIFY_GENERAL_OBJECT(0xa01) Async, timeout. Will cause
>>>>> a leak of a command resource
>>>>> [ 1471.540351] mlx5_core 0000:0d:00.2: modify_virtqueues:1617:(pid
>>>>> 8511) error: modify vq 0 failed, state: 0 -> 0, err: 0
>>>>> [ 1471.541433] mlx5_core 0000:0d:00.2: modify_virtqueues:1617:(pid
>>>>> 8511) error: modify vq 1 failed, state: 0 -> 0, err: -110
>>>>> [ 1471.542388] mlx5_core 0000:0d:00.2: mlx5_vdpa_set_status:3203:(pid
>>>>> 8511) warning: failed to resume VQs
>>>>> [ 1471.549778] mlx5_core 0000:0d:00.2:
>>>>> mlx5_vdpa_show_mr_leaks:573:(pid 8511) warning: mkey still alive after
>>>>> resource delete: mr: 000000000c5ccca2, mkey: 0x40000000, refcount: 2
>>>>> [ 1512.929854] mlx5_core 0000:0d:00.2:
>>>>> mlx5_vdpa_compat_reset:3267:(pid 8565): performing device reset
>>>>> [ 1513.100290] mlx5_core 0000:0d:00.2:
>>>>> mlx5_vdpa_show_mr_leaks:573:(pid 8565) warning: mkey still alive after
>>>>> resource delete: mr: 000000000c5ccca2, mkey: 0x40000000, refcount: 2
>>>>>
>>>
>>> Hi Dragos
>>>
>>>> Can you provide more details about the qemu version and the vdpa device
>>>> options used?
>>>>
>>>> Also, which FW version are you using? There is a relevant bug in FW
>>>> 22.41.1000 which was fixed in the latest FW (22.42.1000). Did you
>>>> encounter any FW syndromes in the host dmesg log?
>>>
>>> This problem has gone when I updated the firmware version to
>>> 22.42.1000, and I tested it with regression tests using mellanox nic,
>>> everything works well.
>>>
>>> Tested-by: Lei Yang <leiyang@redhat.com>
>> Good to hear. Thanks for the quick reaction.
>>
> 
> Is it possible to add a check so it doesn't use the async fashion in old FW?
> 
Unfortunately not, it would have been there otherwise.

Note that this affects only FW version 22.41.1000. Older versions are not
affected because VQ resume is not supported.

Thanks,
Dragos