From: Pierre Yves MORDRET <pierre-yves.mordret@st.com>
To: Fabrice Gasnier <fabrice.gasnier@st.com>, <wsa@the-dreams.de>
Cc: <mcoquelin.stm32@gmail.com>, <alexandre.torgue@st.com>,
<linux-i2c@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] i2c: i2c-stm32f7: fix the get_irq error cases
Date: Thu, 16 May 2019 09:35:21 +0200 [thread overview]
Message-ID: <f0f4f7cd-b151-87d4-e1e1-44969a0ba33b@st.com> (raw)
In-Reply-To: <1557932949-15912-1-git-send-email-fabrice.gasnier@st.com>
Hi
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Thanks
Regards
On 5/15/19 5:09 PM, Fabrice Gasnier wrote:
> During probe, return the "get_irq" error value instead of -EINVAL which
> allows the driver to be deferred probed if needed.
> Fix also the case where of_irq_get() returns a negative value.
> Note :
> On failure of_irq_get() returns 0 or a negative value while
> platform_get_irq() returns a negative value.
>
> Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver")
>
> Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
> ---
> drivers/i2c/busses/i2c-stm32f7.c | 26 ++++++++++++++------------
> 1 file changed, 14 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
> index 4284fc9..14fb105 100644
> --- a/drivers/i2c/busses/i2c-stm32f7.c
> +++ b/drivers/i2c/busses/i2c-stm32f7.c
> @@ -25,7 +25,6 @@
> #include <linux/module.h>
> #include <linux/of.h>
> #include <linux/of_address.h>
> -#include <linux/of_irq.h>
> #include <linux/of_platform.h>
> #include <linux/platform_device.h>
> #include <linux/pinctrl/consumer.h>
> @@ -1812,15 +1811,14 @@ static struct i2c_algorithm stm32f7_i2c_algo = {
>
> static int stm32f7_i2c_probe(struct platform_device *pdev)
> {
> - struct device_node *np = pdev->dev.of_node;
> struct stm32f7_i2c_dev *i2c_dev;
> const struct stm32f7_i2c_setup *setup;
> struct resource *res;
> - u32 irq_error, irq_event, clk_rate, rise_time, fall_time;
> + u32 clk_rate, rise_time, fall_time;
> struct i2c_adapter *adap;
> struct reset_control *rst;
> dma_addr_t phy_addr;
> - int ret;
> + int irq_error, irq_event, ret;
>
> i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL);
> if (!i2c_dev)
> @@ -1832,16 +1830,20 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
> return PTR_ERR(i2c_dev->base);
> phy_addr = (dma_addr_t)res->start;
>
> - irq_event = irq_of_parse_and_map(np, 0);
> - if (!irq_event) {
> - dev_err(&pdev->dev, "IRQ event missing or invalid\n");
> - return -EINVAL;
> + irq_event = platform_get_irq(pdev, 0);
> + if (irq_event < 0) {
> + if (irq_event != -EPROBE_DEFER)
> + dev_err(&pdev->dev, "Failed to get IRQ event: %d\n",
> + irq_event);
> + return irq_event;
> }
>
> - irq_error = irq_of_parse_and_map(np, 1);
> - if (!irq_error) {
> - dev_err(&pdev->dev, "IRQ error missing or invalid\n");
> - return -EINVAL;
> + irq_error = platform_get_irq(pdev, 1);
> + if (irq_error < 0) {
> + if (irq_error != -EPROBE_DEFER)
> + dev_err(&pdev->dev, "Failed to get IRQ error: %d\n",
> + irq_error);
> + return irq_error;
> }
>
> i2c_dev->clk = devm_clk_get(&pdev->dev, NULL);
>
prev parent reply other threads:[~2019-05-16 7:35 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-15 15:09 Fabrice Gasnier
2019-05-16 7:35 ` Pierre Yves MORDRET [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f0f4f7cd-b151-87d4-e1e1-44969a0ba33b@st.com \
--to=pierre-yves.mordret@st.com \
--cc=alexandre.torgue@st.com \
--cc=fabrice.gasnier@st.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®