From: Zeng Heng <zengheng4@huawei.com>
To: Kent Gibson <warthog618@gmail.com>,
Andy Shevchenko <andriy.shevchenko@intel.com>,
<linux@roeck-us.net>
Cc: <linus.walleij@linaro.org>, <brgl@bgdev.pl>,
<linux-gpio@vger.kernel.org>, <liwei391@huawei.com>,
<yuancan@huawei.com>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2] gpiolib: fix memory leak in gpiochip_setup_dev
Date: Thu, 10 Nov 2022 10:36:53 +0800 [thread overview]
Message-ID: <f118d0b1-1bf2-b710-c3b4-2745c72f02b3@huawei.com> (raw)
In-Reply-To: <Y2xTSyce8WfLdtge@sol>
On 2022/11/10 9:26, Kent Gibson wrote:
> On Wed, Nov 09, 2022 at 04:47:08PM +0200, Andy Shevchenko wrote:
>> On Wed, Nov 09, 2022 at 05:31:20PM +0800, Zeng Heng wrote:
>>> gcdev_register & gcdev_unregister call device_add & device_del to
>>> request/release source. But in device_add, the dev->p allocated by
>>> device_private_init is not released by device_del.
>> First of all, we refer to the functions like func().
Thanks, it would be updated in next version.
> Further to this, the description of the problem could be clearer -
> it would be helpful to indicate the code path that triggers the problem
> - it is gpiochip_sysfs_register() returning an error?
>
>>> So when calling gcdev_unregister to release gdev, it needs put_device
>>> to release dev in the following.
>>>
>>> Otherwise, kmemleak would report memory leak such as below:
>>>
>>> unreferenced object 0xffff88810b406400 (size 512):
>>> comm "python3", pid 1682, jiffies 4295346908 (age 24.090s)
>>> hex dump (first 32 bytes):
>>> 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N..........
>>> ff ff ff ff ff ff ff ff a0 5e 23 90 ff ff ff ff .........^#.....
>>> backtrace:
>> Second, read Submitting Patches on how to provide your backtraces in the
>> message body.
Thanks, it would be updated in next version.
>>
>>> [<00000000a58ee5fe>] kmalloc_trace+0x22/0x110
>>> [<0000000045fe2058>] device_add+0xb34/0x1130
>>> [<00000000d778b45f>] cdev_device_add+0x83/0xe0
>>> [<0000000089f948ed>] gpiolib_cdev_register+0x73/0xa0
>>> [<00000000a3a8a316>] gpiochip_setup_dev+0x1c/0x70
>>> [<00000000787227b4>] gpiochip_add_data_with_key+0x10f6/0x1bf0
>>> [<000000009ac5742c>] devm_gpiochip_add_data_with_key+0x2e/0x80
>>> [<00000000bf2b23d9>] xra1403_probe+0x192/0x1b0 [gpio_xra1403]
>>> [<000000005b5ef2d4>] spi_probe+0xe1/0x140
>>> [<000000002b26f6f1>] really_probe+0x17c/0x3f0
>>> [<00000000dd2dad9c>] __driver_probe_device+0xe3/0x170
>>> [<000000005ca60d2a>] device_driver_attach+0x34/0x80
>>> [<00000000e9db90db>] bind_store+0x10b/0x1a0
>>> [<00000000e2650f8a>] drv_attr_store+0x49/0x70
>>> [<0000000080a80b2b>] sysfs_kf_write+0x8c/0xb0
>>> [<00000000a28b45b9>] kernfs_fop_write_iter+0x216/0x2e0
>>>
>>> unreferenced object 0xffff888100de9800 (size 512):
>>> comm "python3", pid 264, jiffies 4294737615 (age 33.514s)
>>> hex dump (first 32 bytes):
>>> 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N..........
>>> ff ff ff ff ff ff ff ff a0 5e 63 a1 ff ff ff ff .........^c.....
>>> backtrace:
>>> [<00000000bcc571d0>] kmalloc_trace+0x22/0x110
>>> [<00000000eeb06124>] device_add+0xb34/0x1130
>>> [<000000007e5cd2fd>] cdev_device_add+0x83/0xe0
>>> [<000000008f6bcd3a>] gpiolib_cdev_register+0x73/0xa0
>>> [<0000000012c93b24>] gpiochip_setup_dev+0x1c/0x70
>>> [<00000000a24b646a>] gpiochip_add_data_with_key+0x10f6/0x1bf0
>>> [<000000000c225212>] tpic2810_probe+0x16e/0x196 [gpio_tpic2810]
>>> [<00000000b52d04ff>] i2c_device_probe+0x651/0x680
>>> [<0000000058d3ff6b>] really_probe+0x17c/0x3f0
>>> [<00000000586f43d3>] __driver_probe_device+0xe3/0x170
>>> [<000000003f428602>] device_driver_attach+0x34/0x80
>>> [<0000000040e91a1b>] bind_store+0x10b/0x1a0
>>> [<00000000c1d990b9>] drv_attr_store+0x49/0x70
>>> [<00000000a23bfc22>] sysfs_kf_write+0x8c/0xb0
>>> [<00000000064e6572>] kernfs_fop_write_iter+0x216/0x2e0
>>> [<00000000026ce093>] vfs_write+0x658/0x810
>>>
>>> Because at the point of gpiochip_setup_dev here, where dev.release
>>> does not set yet, calling put_device would cause the warning of
>>> no release function and double-free in the following fault handler
>>> route (when kfree dev_name). So directly calling kfree to release
>>> dev->p here in case of memory leak.
> Again, this could be clearer. The dev->p is normally freed by
> device_release() - why is that not happening in this case?
> (as put_device() is never called in this path)
>
> The double free you see if you do call put_device() appears to be due to
> different expectations as to the cleanup that gpiochip_setup_dev() will
> perform on error, depending on where it is called. gpiochip_setup_devs()
> assumes any cleanup is performed by gpiochip_setup_dev(), while
> gpiochip_add_data_with_key() assumes that it hasn't performed any cleanup.
>
> Having gpiochip_setup_dev() perform its own cleanup makes the most sense
> to me, so gpiochip_add_data_with_key() should be changed to allow for
> that.
Right, the cleanup route of gpiochip_add_data_with_key() &
gpiochip_setup_dev()
has to be considered comprehensively after any possible cases of fault
injections.
>> ...
>>
>>> @@ -539,6 +539,7 @@ static int gpiochip_setup_dev(struct gpio_device *gdev)
>>>
>>> err_remove_device:
>>> gcdev_unregister(gdev);
>>> + kfree(gdev->dev.p);
>>> return ret;
>> Third, I do not believe it's a correct fix.
>> Have you read comments around device_del() / etc.?
Yes, not only the comments I read, but also the device_del() implement code.
Releasing the dev->p pointer is not the business with device_del(), but
it's relied on
put_device() calling release function.
Turning back here, the release function is not set yet at this point,
there is a gap
between device_add() and set release function pointer.
That's the reason why choose to free dev->p explicitly as the mail
mentioned above.
> I agree - this is not the correct fix. The correct fix is to trigger the
> normal cleanup mechanism, so put_device().
> The fact that that triggers a warning:
>
> "Device '%s' does not have a release() function, it is broken and must be
> fixed. See Documentation/core-api/kobject.rst.\n"
>
> is an indicator that dev.release should be set earlier.
> If gpiodevice_release() is not appropriate, or cannot be modified to deal
> with the device state at that point, then an appropriate interim release
> function should be set.
>
> And, as mentioned above, gpiochip_add_data_with_key() needs to be modified
> to allow for gpiochip_setup_dev() cleaning up its own mess.
>
> That is my take, but that is just from perusing the code so I may be
> totally off base. Either way, an ACK/NACK on this from a maintainer or
> other gpiolib expert would be helpful to expiditing a solution.
>
> Cheers,
> Kent.
Yes, exactly.
Thanks to all,
Zeng Heng
parent reply other threads:[~2022-11-10 2:37 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <Y2xTSyce8WfLdtge@sol>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f118d0b1-1bf2-b710-c3b4-2745c72f02b3@huawei.com \
--to=zengheng4@huawei.com \
--cc=andriy.shevchenko@intel.com \
--cc=brgl@bgdev.pl \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=liwei391@huawei.com \
--cc=warthog618@gmail.com \
--cc=yuancan@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®