Re: [PATCH v8 1/5] PCI: Conditionally initialize host bridge native_* members

["Kuppuswamy, Sathyanarayanan" <sathyanarayanan.kuppuswamy@linux.intel.com>]

On 9/10/20 12:49 PM, Bjorn Helgaas wrote:
> On Fri, Jul 24, 2020 at 08:58:52PM -0700, sathyanarayanan.kuppuswamy@linux.intel.com wrote:
>> From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
>>
>> If CONFIG_PCIEPORTBUS is not enabled in kernel then initialing
>> struct pci_host_bridge PCIe specific native_* members to "1" is
>> incorrect. So protect the PCIe specific member initialization
>> with CONFIG_PCIEPORTBUS.
> 
> s/initialing/initializing/
will fix it in next version.
> 
>> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
>> ---
>>   drivers/pci/probe.c | 4 +++-
>>   1 file changed, 3 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
>> index 2f66988cea25..a94b97564ceb 100644
>> --- a/drivers/pci/probe.c
>> +++ b/drivers/pci/probe.c
>> @@ -588,12 +588,14 @@ static void pci_init_host_bridge(struct pci_host_bridge *bridge)
>>   	 * may implement its own AER handling and use _OSC to prevent the
>>   	 * OS from interfering.
>>   	 */
>> +#ifdef CONFIG_PCIEPORTBUS
>>   	bridge->native_aer = 1;
>>   	bridge->native_pcie_hotplug = 1;
>> -	bridge->native_shpc_hotplug = 1;
>>   	bridge->native_pme = 1;
>>   	bridge->native_ltr = 1;
> 
> native_ltr isn't dependent on PCIEPORTBUS either, is it?  It's only
> used for ASPM.
Agreed. I was confused due to a comment in include/linux/pci.h

  unsigned int    native_ltr:1;           /* OS may use PCIe LTR */

> 
>>   	bridge->native_dpc = 1;
>> +#endif
>> +	bridge->native_shpc_hotplug = 1;
>>   
>>   	device_initialize(&bridge->dev);
>>   }
>> -- 
>> 2.17.1
>>

-- 
Sathyanarayanan Kuppuswamy
Linux Kernel Developer