Re: [PATCH v1 2/2] ASoC: codecs: wsa883x: Handle shared reset GPIO for WSA883x speakers

[Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>]

On 6/24/2025 8:13 AM, Dmitry Baryshkov wrote:
> On Fri, Jun 20, 2025 at 04:00:12PM +0530, Mohammad Rafi Shaik wrote:
>> On some Qualcomm platforms, such as QCS6490-RB3Gen2 and QCM6490-IDP,
>> multiple WSA8830/WSA8835 speakers share a common reset (shutdown) GPIO.
>> To handle such cases, use the reset controller framework along with the
>> "reset-gpio" driver.
>>
>> Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
>> ---
>>   sound/soc/codecs/wsa883x.c | 57 ++++++++++++++++++++++++++++++++------
>>   1 file changed, 48 insertions(+), 9 deletions(-)
>>
>> diff --git a/sound/soc/codecs/wsa883x.c b/sound/soc/codecs/wsa883x.c
>> index 13c9d4a6f015..b82b925c1f8d 100644
>> --- a/sound/soc/codecs/wsa883x.c
>> +++ b/sound/soc/codecs/wsa883x.c
>> @@ -14,6 +14,7 @@
>>   #include <linux/printk.h>
>>   #include <linux/regmap.h>
>>   #include <linux/regulator/consumer.h>
>> +#include <linux/reset.h>
>>   #include <linux/slab.h>
>>   #include <linux/soundwire/sdw.h>
>>   #include <linux/soundwire/sdw_registers.h>
>> @@ -468,6 +469,7 @@ struct wsa883x_priv {
>>   	struct sdw_stream_runtime *sruntime;
>>   	struct sdw_port_config port_config[WSA883X_MAX_SWR_PORTS];
>>   	struct gpio_desc *sd_n;
>> +	struct reset_control *sd_reset;
>>   	bool port_prepared[WSA883X_MAX_SWR_PORTS];
>>   	bool port_enable[WSA883X_MAX_SWR_PORTS];
>>   	int active_ports;
>> @@ -1547,6 +1549,44 @@ static const struct hwmon_chip_info wsa883x_hwmon_chip_info = {
>>   	.info	= wsa883x_hwmon_info,
>>   };
>>   
>> +static void wsa883x_reset_powerdown(void *data)
>> +{
>> +	struct wsa883x_priv *wsa883x = data;
>> +
>> +	if (wsa883x->sd_reset)
>> +		reset_control_assert(wsa883x->sd_reset);
>> +	else
>> +		gpiod_direction_output(wsa883x->sd_n, 1);
>> +}
>> +
>> +static void wsa883x_reset_deassert(struct wsa883x_priv *wsa883x)
> 
> Please name these two functions in using antonyms (e.g. init/fini,
> powerup / powerdown, assert / deassert, etc).
> 
Ack,

sure, will update the function names.

>> +{
>> +	if (wsa883x->sd_reset)
>> +		reset_control_deassert(wsa883x->sd_reset);
>> +	else
>> +		gpiod_direction_output(wsa883x->sd_n, 0);
>> +}
>> +
>> +static int wsa883x_get_reset(struct device *dev, struct wsa883x_priv *wsa883x)
>> +{
>> +	wsa883x->sd_reset = devm_reset_control_get_optional_shared(dev, NULL);
>> +	if (IS_ERR(wsa883x->sd_reset))
>> +		return dev_err_probe(dev, PTR_ERR(wsa883x->sd_reset),
>> +				     "Failed to get reset\n");
>> +	else if (wsa883x->sd_reset)
> 
> No need for 'else' here.

Ack,

will make the changes.

Thanks & best regards,
Rafi.
> 
>> +		return 0;
>> +	/*
>> +	 * else: NULL, so use the backwards compatible way for powerdown-gpios,
>> +	 * which does not handle sharing GPIO properly.
>> +	 */
>> +	wsa883x->sd_n = devm_gpiod_get_optional(dev, "powerdown",
>> +						GPIOD_FLAGS_BIT_NONEXCLUSIVE | GPIOD_OUT_HIGH);
>> +	if (IS_ERR(wsa883x->sd_n))
>> +		return dev_err_probe(dev, PTR_ERR(wsa883x->sd_n),
>> +				     "Shutdown Control GPIO not found\n");
>> +	return 0;
>> +}
>> +
>>   static int wsa883x_probe(struct sdw_slave *pdev,
>>   			 const struct sdw_device_id *id)
>>   {
>> @@ -1567,13 +1607,9 @@ static int wsa883x_probe(struct sdw_slave *pdev,
>>   	if (ret)
>>   		return dev_err_probe(dev, ret, "Failed to enable vdd regulator\n");
>>   
>> -	wsa883x->sd_n = devm_gpiod_get_optional(dev, "powerdown",
>> -						GPIOD_FLAGS_BIT_NONEXCLUSIVE | GPIOD_OUT_HIGH);
>> -	if (IS_ERR(wsa883x->sd_n)) {
>> -		ret = dev_err_probe(dev, PTR_ERR(wsa883x->sd_n),
>> -				    "Shutdown Control GPIO not found\n");
>> -		goto err;
>> -	}
>> +	ret = wsa883x_get_reset(dev, wsa883x);
>> +	if (ret)
>> +		return ret;
>>   
>>   	dev_set_drvdata(dev, wsa883x);
>>   	wsa883x->slave = pdev;
>> @@ -1596,11 +1632,14 @@ static int wsa883x_probe(struct sdw_slave *pdev,
>>   	pdev->prop.simple_clk_stop_capable = true;
>>   	pdev->prop.sink_dpn_prop = wsa_sink_dpn_prop;
>>   	pdev->prop.scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY;
>> -	gpiod_direction_output(wsa883x->sd_n, 0);
>> +
>> +	wsa883x_reset_deassert(wsa883x);
>> +	ret = devm_add_action_or_reset(dev, wsa883x_reset_powerdown, wsa883x);
>> +	if (ret)
>> +		return ret;
>>   
>>   	wsa883x->regmap = devm_regmap_init_sdw(pdev, &wsa883x_regmap_config);
>>   	if (IS_ERR(wsa883x->regmap)) {
>> -		gpiod_direction_output(wsa883x->sd_n, 1);
>>   		ret = dev_err_probe(dev, PTR_ERR(wsa883x->regmap),
>>   				    "regmap_init failed\n");
>>   		goto err;
>> -- 
>> 2.34.1
>>
>