Re: [PATCH 1/2] dt-bindings: arm: Convert CoreSight bindings to DT schema

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 20/05/2022 23:44, Rob Herring wrote:
> Each CoreSight component has slightly different requirements and
> nothing applies to every component, so each CoreSight component has its
> own schema document.
> 

(...)

> +        const: arm,coresight-dynamic-funnel
> +  required:
> +    - compatible
> +
> +allOf:
> +  - $ref: /schemas/arm/primecell.yaml#
> +
> +properties:
> +  compatible:
> +    items:
> +      - const: arm,coresight-dynamic-funnel
> +      - const: arm,primecell
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    minItems: 1
> +    maxItems: 2
> +
> +  clock-names:
> +    minItems: 1
> +    items:
> +      - const: apb_pclk
> +      - const: atclk
> +
> +  in-ports:
> +    $ref: /schemas/graph.yaml#/properties/ports

Shouldn't this be with unevaluatedProperties:false?

> +
> +    patternProperties:
> +      '^port(@[0-7])?$':
> +        description: Input connections from CoreSight Trace bus
> +        $ref: /schemas/graph.yaml#/properties/port
> +
> +  out-ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +    additionalProperties: false
> +
> +    properties:
> +      port:
> +        description: Output connection to CoreSight Trace bus
> +        $ref: /schemas/graph.yaml#/properties/port
> +

(...)

> +title: Arm CoreSight Static Trace Bus Replicator
> +
> +maintainers:
> +  - Mathieu Poirier <mathieu.poirier@linaro.org>
> +  - Mike Leach <mike.leach@linaro.org>
> +  - Leo Yan <leo.yan@linaro.org>
> +  - Suzuki K Poulose <suzuki.poulose@arm.com>
> +
> +description: |
> +  CoreSight components are compliant with the ARM CoreSight architecture
> +  specification and can be connected in various topologies to suit a particular
> +  SoCs tracing needs. These trace components can generally be classified as
> +  sinks, links and sources. Trace data produced by one or more sources flows
> +  through the intermediate links connecting the source to the currently selected
> +  sink.
> +
> +  The Coresight replicator splits a single trace stream into two trace streams
> +  for systems that have more than one trace sink component.
> +
> +properties:
> +  compatible:
> +    const: arm,coresight-static-replicator
> +
> +  in-ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +    additionalProperties: false
> +
> +    properties:
> +      port:
> +        description: Input connection from CoreSight Trace bus
> +        $ref: /schemas/graph.yaml#/properties/port
> +
> +  out-ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    patternProperties:
> +      '^port@[01]$':
> +        description: Output connections to CoreSight Trace bus
> +        $ref: /schemas/graph.yaml#/properties/port
> +

Same question.

(...)

> +title: Arm CoreSight Trace Memory Controller
> +
> +maintainers:
> +  - Mathieu Poirier <mathieu.poirier@linaro.org>
> +  - Mike Leach <mike.leach@linaro.org>
> +  - Leo Yan <leo.yan@linaro.org>
> +  - Suzuki K Poulose <suzuki.poulose@arm.com>
> +
> +description: |
> +  CoreSight components are compliant with the ARM CoreSight architecture
> +  specification and can be connected in various topologies to suit a particular
> +  SoCs tracing needs. These trace components can generally be classified as
> +  sinks, links and sources. Trace data produced by one or more sources flows
> +  through the intermediate links connecting the source to the currently selected
> +  sink.
> +
> +  Trace Memory Controller is used for Embedded Trace Buffer(ETB), Embedded Trace
> +  FIFO(ETF) and Embedded Trace Router(ETR) configurations. The configuration
> +  mode (ETB, ETF, ETR) is discovered at boot time when the device is probed.
> +
> +# Need a custom select here or 'arm,primecell' will match on lots of nodes
> +select:
> +  properties:
> +    compatible:
> +      contains:
> +        const: arm,coresight-tmc
> +  required:
> +    - compatible
> +
> +allOf:
> +  - $ref: /schemas/arm/primecell.yaml#
> +
> +properties:
> +  compatible:
> +    items:
> +      - const: arm,coresight-tmc
> +      - const: arm,primecell
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    minItems: 1
> +    maxItems: 2
> +
> +  clock-names:
> +    minItems: 1
> +    items:
> +      - const: apb_pclk
> +      - const: atclk
> +
> +  arm,buffer-size:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    deprecated: true
> +    description:
> +      Size of contiguous buffer space for TMC ETR (embedded trace router). The
> +      buffer size can be configured dynamically via buffer_size property in
> +      sysfs instead.
> +
> +  arm,scatter-gather:
> +    type: boolean
> +    description:
> +      Indicates that the TMC-ETR can safely use the SG mode on this system.
> +
> +  arm,max-burst-size:
> +    description:
> +      The maximum burst size initiated by TMC on the AXI master interface. The
> +      burst size can be in the range [0..15], the setting supports one data
> +      transfer per burst up to a maximum of 16 data transfers per burst.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    maximum: 15
> +
> +

Just one blank line

Best regards,
Krzysztof