mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Asai Thambi SP <asamymuthupa@micron.com>
To: Jens Axboe <axboe@kernel.dk>
Cc: <linux-kernel@vger.kernel.org>,
	Sam Bradshaw <sbradshaw@micron.com>,
	Selvan Mani <smani@micron.com>,
	Rajesh Kumar Sambandam <rsambandam@micron.com>,
	Vignesh Gunasekaran <vgunasekaran@micron.com>
Subject: [PATCH v2 7/9] mtip32xx: Handle FTL rebuild failure state during device initialization
Date: Wed, 24 Feb 2016 21:18:20 -0800	[thread overview]
Message-ID: <f22a70aa-de7c-7bcf-cde9-19f8333f8886@micron.com> (raw)


Allow device initialization to finish gracefully when it is in
FTL rebuild failure state. Also, recover device out of this state
after successfully secure erasing it.

Signed-off-by: Selvan Mani <smani@micron.com>
Signed-off-by: Vignesh Gunasekaran <vgunasekaran@micron.com>
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
---
 drivers/block/mtip32xx/mtip32xx.c |   11 ++++++-----
 1 files changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c
index 6268ea0..a64da08 100644
--- a/drivers/block/mtip32xx/mtip32xx.c
+++ b/drivers/block/mtip32xx/mtip32xx.c
@@ -699,7 +699,7 @@ static void mtip_handle_tfe(struct driver_data *dd)
 			fail_reason = "thermal shutdown";
 		}
 		if (buf[288] == 0xBF) {
-			set_bit(MTIP_DDF_SEC_LOCK_BIT, &dd->dd_flag);
+			set_bit(MTIP_DDF_REBUILD_FAILED_BIT, &dd->dd_flag);
 			dev_info(&dd->pdev->dev,
 				"Drive indicates rebuild has failed. Secure erase required.\n");
 			fail_all_ncq_cmds = 1;
@@ -1000,6 +1000,7 @@ static bool mtip_pause_ncq(struct mtip_port *port,
 			(fis->features == 0x27 || fis->features == 0x72 ||
 			 fis->features == 0x62 || fis->features == 0x26))) {
 		clear_bit(MTIP_DDF_SEC_LOCK_BIT, &port->dd->dd_flag);
+		clear_bit(MTIP_DDF_REBUILD_FAILED_BIT, &port->dd->dd_flag);
 		/* Com reset after secure erase or lowlevel format */
 		mtip_restart_port(port);
 		clear_bit(MTIP_PF_SE_ACTIVE_BIT, &port->flags);
@@ -1166,6 +1167,7 @@ static int mtip_exec_internal_command(struct mtip_port *port,
 		if ((rv = wait_for_completion_interruptible_timeout(
 				&wait,
 				msecs_to_jiffies(timeout))) <= 0) {
+
 			if (rv == -ERESTARTSYS) { /* interrupted */
 				dev_err(&dd->pdev->dev,
 					"Internal command [%02X] was interrupted after %u ms\n",
@@ -3084,7 +3086,7 @@ static int mtip_hw_get_identify(struct driver_data *dd)
 		if (buf[288] == 0xBF) {
 			dev_info(&dd->pdev->dev,
 				"Drive indicates rebuild has failed.\n");
-			/* TODO */
+			set_bit(MTIP_DDF_REBUILD_FAILED_BIT, &dd->dd_flag);
 		}
 	}
 
@@ -3687,10 +3689,9 @@ static int mtip_submit_request(struct blk_mq_hw_ctx *hctx, struct request *rq)
 				rq_data_dir(rq))) {
 			return -ENODATA;
 		}
-		if (unlikely(test_bit(MTIP_DDF_SEC_LOCK_BIT, &dd->dd_flag)))
+		if (unlikely(test_bit(MTIP_DDF_SEC_LOCK_BIT, &dd->dd_flag) ||
+			test_bit(MTIP_DDF_REBUILD_FAILED_BIT, &dd->dd_flag)))
 			return -ENODATA;
-		if (test_bit(MTIP_DDF_REBUILD_FAILED_BIT, &dd->dd_flag))
-			return -ENXIO;
 	}
 
 	if (rq->cmd_flags & REQ_DISCARD) {
-- 
1.7.1

                 reply	other threads:[~2016-02-25  5:18 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f22a70aa-de7c-7bcf-cde9-19f8333f8886@micron.com \
    --to=asamymuthupa@micron.com \
    --cc=axboe@kernel.dk \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rsambandam@micron.com \
    --cc=sbradshaw@micron.com \
    --cc=smani@micron.com \
    --cc=vgunasekaran@micron.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®