Re: [PATCH v3 net-next] net: phy: realtek: read actual speed on rtl8211f to detect downshift

[Yonglong Liu <liuyonglong@huawei.com>]

Hi, Antonio:

     Could you help to provide a downshift warning message when this 
happen?

     It's a little strange that the adv and the lpa support 1000M, but 
finally the link speed is 100M.

Settings for eth5:
         Supported ports: [ TP ]
         Supported link modes:   10baseT/Half 10baseT/Full
                                 100baseT/Half 100baseT/Full
                                 1000baseT/Full
         Supported pause frame use: Symmetric Receive-only
         Supports auto-negotiation: Yes
         Supported FEC modes: Not reported
         *Advertised link modes:  10baseT/Half 10baseT/Full
                                 100baseT/Half 100baseT/Full
                                 1000baseT/Full*
         Advertised pause frame use: Symmetric
         Advertised auto-negotiation: Yes
         Advertised FEC modes: Not reported
         *Link partner advertised link modes:  10baseT/Half 10baseT/Full
                                              100baseT/Half 100baseT/Full
                                              1000baseT/Full*
         Link partner advertised pause frame use: Symmetric
         Link partner advertised auto-negotiation: Yes
         Link partner advertised FEC modes: Not reported
         *Speed: 100Mb/s*
         Duplex: Full
         Port: MII
         PHYAD: 3
         Transceiver: internal
         Auto-negotiation: on
         Current message level: 0x00000036 (54)
                                probe link ifdown ifup
         Link detected: yes


     

On 2020/11/25 23:03, Yonglong Liu wrote:
> Tested-by: Yonglong Liu <liuyonglong@huawei.com>
>
> On 2020/11/25 7:07, Antonio Borneo wrote:
>> The rtl8211f supports downshift and before commit 5502b218e001
>> ("net: phy: use phy_resolve_aneg_linkmode in genphy_read_status")
>> the read-back of register MII_CTRL1000 was used to detect the
>> negotiated link speed.
>> The code added in commit d445dff2df60 ("net: phy: realtek: read
>> actual speed to detect downshift") is working fine also for this
>> phy and it's trivial re-using it to restore the downshift
>> detection on rtl8211f.
>>
>> Add the phy specific read_status() pointing to the existing
>> function rtlgen_read_status().
>>
>> Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
>> Link: 
>> https://lore.kernel.org/r/478f871a-583d-01f1-9cc5-2eea56d8c2a7@huawei.com
>> ---
>> To: Andrew Lunn <andrew@lunn.ch>
>> To: Heiner Kallweit <hkallweit1@gmail.com>
>> To: Russell King <linux@armlinux.org.uk>
>> To: "David S. Miller" <davem@davemloft.net>
>> To: Jakub Kicinski <kuba@kernel.org>
>> To: netdev@vger.kernel.org
>> To: Yonglong Liu <liuyonglong@huawei.com>
>> To: Willy Liu <willy.liu@realtek.com>
>> Cc: linuxarm@huawei.com
>> Cc: Salil Mehta <salil.mehta@huawei.com>
>> Cc: linux-stm32@st-md-mailman.stormreply.com
>> Cc: linux-kernel@vger.kernel.org
>> In-Reply-To: <20201124143848.874894-1-antonio.borneo@st.com>
>>
>> V1 => V2
>>     move from a generic implementation affecting every phy
>>     to a rtl8211f specific implementation
>> V2 => V3
>>     rebase on netdev-next, resolving minor conflict after
>>     merge of 8b43357fff61
>> ---
>>   drivers/net/phy/realtek.c | 1 +
>>   1 file changed, 1 insertion(+)
>>
>> diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
>> index f71eda945c6a..99ecd6c4c15a 100644
>> --- a/drivers/net/phy/realtek.c
>> +++ b/drivers/net/phy/realtek.c
>> @@ -729,6 +729,7 @@ static struct phy_driver realtek_drvs[] = {
>>           PHY_ID_MATCH_EXACT(0x001cc916),
>>           .name        = "RTL8211F Gigabit Ethernet",
>>           .config_init    = &rtl8211f_config_init,
>> +        .read_status    = rtlgen_read_status,
>>           .config_intr    = &rtl8211f_config_intr,
>>           .handle_interrupt = rtl8211f_handle_interrupt,
>>           .suspend    = genphy_suspend,
>>
>> base-commit: 1d155dfdf50efc2b0793bce93c06d1a5b23d0877
>
> _______________________________________________
> Linuxarm mailing list
> Linuxarm@huawei.com
> http://hulk.huawei.com/mailman/listinfo/linuxarm
>
> .