From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758280Ab3BFW7A (ORCPT ); Wed, 6 Feb 2013 17:59:00 -0500 Received: from mx1.redhat.com ([209.132.183.28]:19572 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752775Ab3BFW6z (ORCPT ); Wed, 6 Feb 2013 17:58:55 -0500 Date: Thu, 7 Feb 2013 01:02:59 +0200 From: "Michael S. Tsirkin" To: netdev@vger.kernel.org Cc: Eilon Greenstein , Jeff Kirsher , Jesse Brandeburg , Bruce Allan , Carolyn Wyborny , Don Skidmore , Greg Rose , Peter P Waskiewicz Jr , Alex Duyck , John Ronciak , Tushar Dave , Jitendra Kalsaria , Sony Chacko , linux-driver@qlogic.com, John Fastabend , "David S. Miller" , Jacob Keller , linux-kernel@vger.kernel.org, e1000-devel@lists.sourceforge.net, bhutchings@solarflare.com, eric.dumazet@gmail.com Subject: [PATCH 2/2] qlcnic: set gso_type Message-ID: References: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: X-Mutt-Fcc: =sent Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org qlcnic set gso_size but not gso type. This leads to crashes in macvtap. Signed-off-by: Michael S. Tsirkin --- This one I only compiled - don't have qlogic hardware. drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c index bb4311e..370049c 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c @@ -1043,8 +1043,13 @@ qlcnic_process_lro(struct qlcnic_adapter *adapter, th->seq = htonl(seq_number); length = skb->len; - if (adapter->flags & QLCNIC_FW_LRO_MSS_CAP) + if (adapter->flags & QLCNIC_FW_LRO_MSS_CAP) { skb_shinfo(skb)->gso_size = qlcnic_get_lro_sts_mss(sts_data1); + if (skb->protocol == ETH_P_IPV6) + skb_shinfo(skb)->gso_type = SKB_GSO_TCPV6; + else + skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4; + } if (vid != 0xffff) __vlan_hwaccel_put_tag(skb, vid); -- MST