From: <Manikandan.M@microchip.com>
To: <sam@ravnborg.org>, <bbrezillon@kernel.org>,
<maarten.lankhorst@linux.intel.com>, <mripard@kernel.org>,
<tzimmermann@suse.de>, <airlied@gmail.com>, <simona@ffwll.ch>,
<Nicolas.Ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
<claudiu.beznea@tuxon.dev>, <lee@kernel.org>,
<dri-devel@lists.freedesktop.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Cc: <Dharma.B@microchip.com>
Subject: Re: [PATCH 1/3] drm: atmel-hlcdc: add support for LVDS encoder type
Date: Tue, 28 Jan 2025 05:03:45 +0000 [thread overview]
Message-ID: <f2749762-3113-4647-9f40-096cc6ee3414@microchip.com> (raw)
In-Reply-To: <20241121092308.130328-1-manikandan.m@microchip.com>
Hi,
A gentle reminder to review this series.
On 21/11/24 2:53 pm, Manikandan Muralidharan wrote:
> From: Dharma Balasubiramani <dharma.b@microchip.com>
>
> Add support for encoder type "DRM_MODE_ENCODER_LVDS" with the following
> bus formats:
> - RGB888_1X7X4_SPWG
> - RGB888_1X7X4_JEIDA
> - RGB666_1X7X3_SPWG
> - RGB666_1X18
>
> Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
> [manikandan.m@microchip.com: move modifications inside the
> atmel_xlcdc_connector_output_lvds fn]
> Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
> ---
> .../gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 38 +++++++++++++++++++
> 1 file changed, 38 insertions(+)
>
> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> index 0f7ffb3ced20..0e709047369a 100644
> --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> @@ -356,6 +356,42 @@ static int atmel_xlcdc_connector_output_dsi(struct drm_encoder *encoder,
> return supported_fmts;
> }
>
> +static int atmel_xlcdc_connector_output_lvds(struct drm_encoder *encoder,
> + struct drm_display_info *info)
> +{
> + int j;
> + unsigned int supported_fmts = 0;
> +
> + switch (atmel_hlcdc_encoder_get_bus_fmt(encoder)) {
> + case 0:
> + break;
> + case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG:
> + case MEDIA_BUS_FMT_RGB666_1X18:
> + return ATMEL_HLCDC_RGB666_OUTPUT;
> + case MEDIA_BUS_FMT_RGB888_1X7X4_SPWG:
> + case MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA:
> + return ATMEL_HLCDC_RGB888_OUTPUT;
> + default:
> + return -EINVAL;
> + }
> +
> + for (j = 0; j < info->num_bus_formats; j++) {
> + switch (info->bus_formats[j]) {
> + case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG:
> + case MEDIA_BUS_FMT_RGB666_1X18:
> + supported_fmts |= ATMEL_HLCDC_RGB666_OUTPUT;
> + break;
> + case MEDIA_BUS_FMT_RGB888_1X7X4_SPWG:
> + case MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA:
> + supported_fmts |= ATMEL_HLCDC_RGB888_OUTPUT;
> + break;
> + default:
> + break;
> + }
> + }
> + return supported_fmts;
> +}
> +
> static int atmel_hlcdc_connector_output_mode(struct drm_connector_state *state)
> {
> struct drm_connector *connector = state->connector;
> @@ -374,6 +410,8 @@ static int atmel_hlcdc_connector_output_mode(struct drm_connector_state *state)
> */
> if (encoder->encoder_type == DRM_MODE_ENCODER_DSI)
> return atmel_xlcdc_connector_output_dsi(encoder, info);
> + else if (encoder->encoder_type == DRM_MODE_ENCODER_LVDS)
> + return atmel_xlcdc_connector_output_lvds(encoder, info);
>
> switch (atmel_hlcdc_encoder_get_bus_fmt(encoder)) {
> case 0:
--
Thanks and Regards,
Manikandan M.
prev parent reply other threads:[~2025-01-28 5:03 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-21 9:23 Manikandan Muralidharan
2024-11-21 9:23 ` [PATCH 2/3] mfd: atmel-hlcdc: fetch LVDS PLL clock for LVDS display Manikandan Muralidharan
2025-02-10 17:25 ` Lee Jones
2024-11-21 9:23 ` [PATCH 3/3] drm: atmel-hlcdc: set LVDS PLL clock rate for LVDS Displays Manikandan Muralidharan
2025-01-28 5:03 ` Manikandan.M [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f2749762-3113-4647-9f40-096cc6ee3414@microchip.com \
--to=manikandan.m@microchip.com \
--cc=Dharma.B@microchip.com \
--cc=Nicolas.Ferre@microchip.com \
--cc=airlied@gmail.com \
--cc=alexandre.belloni@bootlin.com \
--cc=bbrezillon@kernel.org \
--cc=claudiu.beznea@tuxon.dev \
--cc=dri-devel@lists.freedesktop.org \
--cc=lee@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=sam@ravnborg.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®