mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Wayne Porter <wporter82@gmail.com>
To: gregkh@linuxfoundation.org
Cc: Wayne Porter <wporter82@gmail.com>, linux-kernel@vger.kernel.org
Subject: [PATCH 21/45] staging: rts5208: Long lines fixes
Date: Tue, 11 Oct 2016 21:56:37 +0000	[thread overview]
Message-ID: <f27b0f62f217f32cde9d4a7921ea71e6a6d7ae7e.1476222674.git.wporter82@gmail.com> (raw)
In-Reply-To: <cover.1476222674.git.wporter82@gmail.com>
In-Reply-To: <cover.1476222674.git.wporter82@gmail.com>

Break up long lines in rtsx_chip.h

Signed-off-by: Wayne Porter <wporter82@gmail.com>
---
 drivers/staging/rts5208/rtsx_chip.h | 85 +++++++++++++++++++++++++------------
 1 file changed, 57 insertions(+), 28 deletions(-)

diff --git a/drivers/staging/rts5208/rtsx_chip.h b/drivers/staging/rts5208/rtsx_chip.h
index daa8ff2..fd10ee6 100644
--- a/drivers/staging/rts5208/rtsx_chip.h
+++ b/drivers/staging/rts5208/rtsx_chip.h
@@ -285,7 +285,8 @@ struct sense_data_t {
 
 #define CARD_INT		(XD_INT | MS_INT | SD_INT)
 #define NEED_COMPLETE_INT	(DATA_DONE_INT | TRANS_OK_INT | TRANS_FAIL_INT)
-#define RTSX_INT		(CMD_DONE_INT | NEED_COMPLETE_INT | CARD_INT | GPIO0_INT | OC_INT)
+#define RTSX_INT		(CMD_DONE_INT | NEED_COMPLETE_INT | CARD_INT | \
+				 GPIO0_INT | OC_INT)
 
 #define CARD_EXIST		(XD_EXIST | MS_EXIST | SD_EXIST)
 
@@ -393,14 +394,23 @@ struct zone_entry {
 
 /* SD card */
 #define CHK_SD(sd_card)			(((sd_card)->sd_type & 0xFF) == TYPE_SD)
-#define CHK_SD_HS(sd_card)		(CHK_SD(sd_card) && ((sd_card)->sd_type & SD_HS))
-#define CHK_SD_SDR50(sd_card)		(CHK_SD(sd_card) && ((sd_card)->sd_type & SD_SDR50))
-#define CHK_SD_DDR50(sd_card)		(CHK_SD(sd_card) && ((sd_card)->sd_type & SD_DDR50))
-#define CHK_SD_SDR104(sd_card)		(CHK_SD(sd_card) && ((sd_card)->sd_type & SD_SDR104))
-#define CHK_SD_HCXC(sd_card)		(CHK_SD(sd_card) && ((sd_card)->sd_type & SD_HCXC))
-#define CHK_SD_HC(sd_card)		(CHK_SD_HCXC(sd_card) && ((sd_card)->capacity <= 0x4000000))
-#define CHK_SD_XC(sd_card)		(CHK_SD_HCXC(sd_card) && ((sd_card)->capacity > 0x4000000))
-#define CHK_SD30_SPEED(sd_card)		(CHK_SD_SDR50(sd_card) || CHK_SD_DDR50(sd_card) || CHK_SD_SDR104(sd_card))
+#define CHK_SD_HS(sd_card)		(CHK_SD(sd_card) && \
+					 ((sd_card)->sd_type & SD_HS))
+#define CHK_SD_SDR50(sd_card)		(CHK_SD(sd_card) && \
+					 ((sd_card)->sd_type & SD_SDR50))
+#define CHK_SD_DDR50(sd_card)		(CHK_SD(sd_card) && \
+					 ((sd_card)->sd_type & SD_DDR50))
+#define CHK_SD_SDR104(sd_card)		(CHK_SD(sd_card) && \
+					 ((sd_card)->sd_type & SD_SDR104))
+#define CHK_SD_HCXC(sd_card)		(CHK_SD(sd_card) && \
+					 ((sd_card)->sd_type & SD_HCXC))
+#define CHK_SD_HC(sd_card)		(CHK_SD_HCXC(sd_card) && \
+					 ((sd_card)->capacity <= 0x4000000))
+#define CHK_SD_XC(sd_card)		(CHK_SD_HCXC(sd_card) && \
+					 ((sd_card)->capacity > 0x4000000))
+#define CHK_SD30_SPEED(sd_card)		(CHK_SD_SDR50(sd_card) || \
+					 CHK_SD_DDR50(sd_card) || \
+					 CHK_SD_SDR104(sd_card))
 
 #define SET_SD(sd_card)			((sd_card)->sd_type = TYPE_SD)
 #define SET_SD_HS(sd_card)		((sd_card)->sd_type |= SD_HS)
@@ -416,13 +426,20 @@ struct zone_entry {
 #define CLR_SD_HCXC(sd_card)		((sd_card)->sd_type &= ~SD_HCXC)
 
 /* MMC card */
-#define CHK_MMC(sd_card)		(((sd_card)->sd_type & 0xFF) == TYPE_MMC)
-#define CHK_MMC_26M(sd_card)		(CHK_MMC(sd_card) && ((sd_card)->sd_type & MMC_26M))
-#define CHK_MMC_52M(sd_card)		(CHK_MMC(sd_card) && ((sd_card)->sd_type & MMC_52M))
-#define CHK_MMC_4BIT(sd_card)		(CHK_MMC(sd_card) && ((sd_card)->sd_type & MMC_4BIT))
-#define CHK_MMC_8BIT(sd_card)		(CHK_MMC(sd_card) && ((sd_card)->sd_type & MMC_8BIT))
-#define CHK_MMC_SECTOR_MODE(sd_card)	(CHK_MMC(sd_card) && ((sd_card)->sd_type & MMC_SECTOR_MODE))
-#define CHK_MMC_DDR52(sd_card)		(CHK_MMC(sd_card) && ((sd_card)->sd_type & MMC_DDR52))
+#define CHK_MMC(sd_card)		(((sd_card)->sd_type & 0xFF) == \
+					 TYPE_MMC)
+#define CHK_MMC_26M(sd_card)		(CHK_MMC(sd_card) && \
+					 ((sd_card)->sd_type & MMC_26M))
+#define CHK_MMC_52M(sd_card)		(CHK_MMC(sd_card) && \
+					 ((sd_card)->sd_type & MMC_52M))
+#define CHK_MMC_4BIT(sd_card)		(CHK_MMC(sd_card) && \
+					 ((sd_card)->sd_type & MMC_4BIT))
+#define CHK_MMC_8BIT(sd_card)		(CHK_MMC(sd_card) && \
+					 ((sd_card)->sd_type & MMC_8BIT))
+#define CHK_MMC_SECTOR_MODE(sd_card)	(CHK_MMC(sd_card) && \
+					 ((sd_card)->sd_type & MMC_SECTOR_MODE))
+#define CHK_MMC_DDR52(sd_card)		(CHK_MMC(sd_card) && \
+					 ((sd_card)->sd_type & MMC_DDR52))
 
 #define SET_MMC(sd_card)		((sd_card)->sd_type = TYPE_MMC)
 #define SET_MMC_26M(sd_card)		((sd_card)->sd_type |= MMC_26M)
@@ -439,7 +456,8 @@ struct zone_entry {
 #define CLR_MMC_SECTOR_MODE(sd_card)	((sd_card)->sd_type &= ~MMC_SECTOR_MODE)
 #define CLR_MMC_DDR52(sd_card)		((sd_card)->sd_type &= ~MMC_DDR52)
 
-#define CHK_MMC_HS(sd_card)		(CHK_MMC_52M(sd_card) && CHK_MMC_26M(sd_card))
+#define CHK_MMC_HS(sd_card)		(CHK_MMC_52M(sd_card) && \
+					 CHK_MMC_26M(sd_card))
 #define CLR_MMC_HS(sd_card)			\
 do {						\
 	CLR_MMC_DDR52(sd_card);			\
@@ -450,12 +468,18 @@ do {						\
 #define SD_SUPPORT_CLASS_TEN		0x01
 #define SD_SUPPORT_1V8			0x02
 
-#define SD_SET_CLASS_TEN(sd_card)	((sd_card)->sd_setting |= SD_SUPPORT_CLASS_TEN)
-#define SD_CHK_CLASS_TEN(sd_card)	((sd_card)->sd_setting & SD_SUPPORT_CLASS_TEN)
-#define SD_CLR_CLASS_TEN(sd_card)	((sd_card)->sd_setting &= ~SD_SUPPORT_CLASS_TEN)
-#define SD_SET_1V8(sd_card)		((sd_card)->sd_setting |= SD_SUPPORT_1V8)
-#define SD_CHK_1V8(sd_card)		((sd_card)->sd_setting & SD_SUPPORT_1V8)
-#define SD_CLR_1V8(sd_card)		((sd_card)->sd_setting &= ~SD_SUPPORT_1V8)
+#define SD_SET_CLASS_TEN(sd_card)	((sd_card)->sd_setting |= \
+					 SD_SUPPORT_CLASS_TEN)
+#define SD_CHK_CLASS_TEN(sd_card)	((sd_card)->sd_setting & \
+					 SD_SUPPORT_CLASS_TEN)
+#define SD_CLR_CLASS_TEN(sd_card)	((sd_card)->sd_setting &= \
+					 ~SD_SUPPORT_CLASS_TEN)
+#define SD_SET_1V8(sd_card)		((sd_card)->sd_setting |= \
+					 SD_SUPPORT_1V8)
+#define SD_CHK_1V8(sd_card)		((sd_card)->sd_setting & \
+					 SD_SUPPORT_1V8)
+#define SD_CLR_1V8(sd_card)		((sd_card)->sd_setting &= \
+					 ~SD_SUPPORT_1V8)
 
 struct sd_info {
 	u16 sd_type;
@@ -544,9 +568,12 @@ struct xd_info {
 #define HG8BIT			(MS_HG | MS_8BIT)
 
 #define CHK_MSPRO(ms_card)	(((ms_card)->ms_type & 0xFF) == TYPE_MSPRO)
-#define CHK_HG8BIT(ms_card)	(CHK_MSPRO(ms_card) && (((ms_card)->ms_type & HG8BIT) == HG8BIT))
-#define CHK_MSXC(ms_card)	(CHK_MSPRO(ms_card) && ((ms_card)->ms_type & MS_XC))
-#define CHK_MSHG(ms_card)	(CHK_MSPRO(ms_card) && ((ms_card)->ms_type & MS_HG))
+#define CHK_HG8BIT(ms_card)	(CHK_MSPRO(ms_card) && \
+				 (((ms_card)->ms_type & HG8BIT) == HG8BIT))
+#define CHK_MSXC(ms_card)	(CHK_MSPRO(ms_card) && \
+				 ((ms_card)->ms_type & MS_XC))
+#define CHK_MSHG(ms_card)	(CHK_MSPRO(ms_card) && \
+				 ((ms_card)->ms_type & MS_HG))
 
 #define CHK_MS8BIT(ms_card)	(((ms_card)->ms_type & MS_8BIT))
 #define CHK_MS4BIT(ms_card)	(((ms_card)->ms_type & MS_4BIT))
@@ -679,8 +706,10 @@ struct trace_msg_t {
 #define CLR_SDIO_EXIST(chip)		((chip)->sdio_func_exist &= ~SDIO_EXIST)
 
 #define CHK_SDIO_IGNORED(chip)		((chip)->sdio_func_exist & SDIO_IGNORED)
-#define SET_SDIO_IGNORED(chip)		((chip)->sdio_func_exist |= SDIO_IGNORED)
-#define CLR_SDIO_IGNORED(chip)		((chip)->sdio_func_exist &= ~SDIO_IGNORED)
+#define SET_SDIO_IGNORED(chip)		((chip)->sdio_func_exist |= \
+					 SDIO_IGNORED)
+#define CLR_SDIO_IGNORED(chip)		((chip)->sdio_func_exist &= \
+					 ~SDIO_IGNORED)
 
 struct rtsx_chip {
 	struct rtsx_dev	*rtsx;
-- 
2.1.4

  parent reply	other threads:[~2016-10-11 22:04 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-11 21:56 [PATCH 00/45] staging: rts5208: Checkpatch.pl cleanup Wayne Porter
2016-10-11 21:56 ` [PATCH 01/45] staging: rts5208: spi.c: Remove unnecessary parenthesis Wayne Porter
2016-10-11 21:56 ` [PATCH 02/45] staging: rts5208: spi.c: Alignment fixes Wayne Porter
2016-10-11 21:56 ` [PATCH 03/45] staging: rts5208: sd.h: " Wayne Porter
2016-10-11 21:56 ` [PATCH 04/45] staging: rts5208: sd.c: Remove unnecessary parentheses Wayne Porter
2016-10-11 21:56 ` [PATCH 05/45] staging: rts5208: sd.c: Alignment fixes Wayne Porter
2016-10-11 21:56 ` [PATCH 06/45] staging: rts5208: sd.c: Long line fixes Wayne Porter
2016-10-11 21:56 ` [PATCH 07/45] staging: rts5208: sd.c: CamelCase fixes Wayne Porter
2016-10-11 21:56 ` [PATCH 08/45] staging: rts5208: sd.c: Fix logical continuations Wayne Porter
2016-10-11 21:56 ` [PATCH 09/45] staging: rts5208: sd.c: Spacing cleanup Wayne Porter
2016-10-11 21:56 ` [PATCH 10/45] staging: rts5208: Alignment fixes Wayne Porter
2016-10-11 21:56 ` [PATCH 11/45] staging: rts5208: Unnecessary parentheses cleanup Wayne Porter
2016-10-11 21:56 ` [PATCH 12/45] staging: rts5208: Alignment fix Wayne Porter
2016-10-11 21:56 ` [PATCH 13/45] staging: rts5208: Fix typo in function name Wayne Porter
2016-10-11 21:56 ` [PATCH 14/45] staging: rts5208: Alignment fixes Wayne Porter
2016-10-11 21:56 ` [PATCH 15/45] staging: rts5208: Remove parentheses Wayne Porter
2016-10-11 21:56 ` [PATCH 16/45] staging: rts5208: CamelCase fixes Wayne Porter
2016-10-11 21:56 ` [PATCH 17/45] staging: rts5208: Remove multiple assignment Wayne Porter
2016-10-11 21:56 ` [PATCH 18/45] staging: rts5208: Add braces to if() Wayne Porter
2016-10-11 21:56 ` [PATCH 19/45] staging: rts5208: Add space around operator Wayne Porter
2016-10-11 21:56 ` [PATCH 20/45] staging: rts5208: Alignment fixes Wayne Porter
2016-10-11 21:56 ` Wayne Porter [this message]
2016-10-11 21:56 ` [PATCH 22/45] staging: rts5208: Prefer using BIT macro Wayne Porter
2016-10-11 21:56 ` [PATCH 23/45] staging: rts5208: Parenthesis alignment Wayne Porter
2016-10-11 21:56 ` [PATCH 24/45] staging: rts5208: Unecessary parantheses Wayne Porter
2016-10-11 21:56 ` [PATCH 25/45] staging: rts5208: Parenthesis alignment Wayne Porter
2016-10-11 21:56 ` [PATCH 26/45] staging: rts5208: Unnecessary parentheses Wayne Porter
2016-10-11 21:56 ` [PATCH 27/45] staging: rts5208: Spacing Wayne Porter
2016-10-11 21:56 ` [PATCH 28/45] staging: rts5208: Comparison to NULL Wayne Porter
2016-10-11 21:56 ` [PATCH 29/45] staging: rts5208: rtsx.c: Unnecessary parentheses Wayne Porter
2016-10-11 21:56 ` [PATCH 30/45] staging: rts5208: rtsx.c: Alignment Wayne Porter
2016-10-11 21:56 ` [PATCH 31/45] staging: rts5208: rtsx.c: Multiple assignments Wayne Porter
2016-10-11 21:56 ` [PATCH 32/45] staging: rts5208: rtsx.c: Spacing Wayne Porter
2016-10-11 21:56 ` [PATCH 33/45] staging: rts5208: rtsx.c: CamelCase Wayne Porter
2016-10-11 21:56 ` [PATCH 34/45] staging: rts5208: rtsx.c: Spacing Wayne Porter
2016-10-11 21:56 ` [PATCH 35/45] staging: rts5208: rtsx.c: Alloc sizeof struct Wayne Porter
2016-10-11 21:56 ` [PATCH 36/45] staging: rts5208: ms.h: Parenthesis alignment Wayne Porter
2016-10-11 21:56 ` [PATCH 37/45] staging: rts5208: ms.c: " Wayne Porter
2016-10-11 21:56 ` [PATCH 38/45] staging: rts5208: ms.c: Long Lines Wayne Porter
2016-10-11 21:56 ` [PATCH 39/45] staging: rts5208: ms.c: Multiple assignments Wayne Porter
2016-10-11 21:56 ` [PATCH 40/45] staging: rts5208: ms.c: Braces fix Wayne Porter
2016-10-11 21:56 ` [PATCH 41/45] staging: rts5208: CamelCase fix Wayne Porter
2016-10-11 21:56 ` [PATCH 42/45] staging: rts5208: rtsx_scsi.h: Long lines Wayne Porter
2016-10-11 21:56 ` [PATCH 43/45] staging: rts5208: rtxs_chip.h: " Wayne Porter
2016-10-11 21:57 ` [PATCH 44/45] staging: rts5208: rtsx_chip.c: " Wayne Porter
2016-10-11 21:57 ` [PATCH 45/45] staging: rts5208: rtsx.c: Alignment fix Wayne Porter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f27b0f62f217f32cde9d4a7921ea71e6a6d7ae7e.1476222674.git.wporter82@gmail.com \
    --to=wporter82@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®