From: Saeed Mahameed <saeed@kernel.org>
To: Yunsheng Lin <linyunsheng@huawei.com>,
Saeed Mahameed <saeedm@nvidia.com>,
"tanhuazhong@huawei.com" <tanhuazhong@huawei.com>,
"davem@davemloft.net" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>
Cc: "yisen.zhuang@huawei.com" <yisen.zhuang@huawei.com>,
"salil.mehta@huawei.com" <salil.mehta@huawei.com>,
"linuxarm@huawei.com" <linuxarm@huawei.com>,
"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"kuba@kernel.org" <kuba@kernel.org>
Subject: Re: [PATCH net-next 6/6] net: hns3: use napi_consume_skb() when cleaning tx desc
Date: Wed, 16 Sep 2020 01:33:35 -0700 [thread overview]
Message-ID: <f2a27306606ab6a882f6a6e4363d07174e55c745.camel@kernel.org> (raw)
In-Reply-To: <2b1219b6-a7dd-38a3-bfb7-1cb49330df90@huawei.com>
On Tue, 2020-09-15 at 15:04 +0800, Yunsheng Lin wrote:
> On 2020/9/15 13:09, Saeed Mahameed wrote:
> > On Mon, 2020-09-14 at 20:06 +0800, Huazhong Tan wrote:
> > > From: Yunsheng Lin <linyunsheng@huawei.com>
> > >
> > > Use napi_consume_skb() to batch consuming skb when cleaning
> > > tx desc in NAPI polling.
> > >
> > > Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
> > > Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
> > > ---
> > > drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 27
> > > +++++++++++-
> > > ----------
> > > drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 2 +-
> > > drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 4 ++--
> > > 3 files changed, 17 insertions(+), 16 deletions(-)
> > >
> > > diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
> > > b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
> > > index 4a49a76..feeaf75 100644
> > > --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
> > > +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
> > > @@ -2333,10 +2333,10 @@ static int hns3_alloc_buffer(struct
> > > hns3_enet_ring *ring,
> > > }
> > >
> > > static void hns3_free_buffer(struct hns3_enet_ring *ring,
> > > - struct hns3_desc_cb *cb)
> > > + struct hns3_desc_cb *cb, int budget)
> > > {
> > > if (cb->type == DESC_TYPE_SKB)
> > > - dev_kfree_skb_any((struct sk_buff *)cb->priv);
> > > + napi_consume_skb(cb->priv, budget);
> >
> > This code can be reached from hns3_lb_clear_tx_ring() below which
> > is
> > your loopback test and called with non-zero budget, I am not sure
> > you
> > are allowed to call napi_consume_skb() with non-zero budget outside
> > napi context, perhaps the cb->type for loopback test is different
> > in lb
> > test case ? Idk.. , please double check other code paths.
>
> Yes, loopback test may call napi_consume_skb() with non-zero budget
> outside
> napi context. Thanks for pointing out this case.
>
> How about add the below WARN_ONCE() in napi_consume_skb() to catch
> this
> kind of error?
>
> WARN_ONCE(!in_serving_softirq(), "napi_consume_skb() is called with
> non-zero budget outside napi context");
>
Cc: Eric
I don't know, need to check performance impact.
And in_serving_softirq() doesn't necessarily mean in napi
but looking at _kfree_skb_defer(), i think it shouldn't care if napi or
not as long as it runs in soft irq it will push the skb to that
particular cpu napi_alloc_cache, which should be fine.
Maybe instead of the WARN_ONCE just remove the budget condition and
replace it with
if (!in_serving_softirq())
dev_consume_skb_any(skb);
next prev parent reply other threads:[~2020-09-16 8:33 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-14 12:06 [PATCH net-next 0/6] net: hns3: updates for -next Huazhong Tan
2020-09-14 12:06 ` [PATCH net-next 1/6] net: hns3: batch the page reference count updates Huazhong Tan
2020-09-14 12:06 ` [PATCH net-next 2/6] net: hns3: batch tx doorbell operation Huazhong Tan
2020-09-14 12:06 ` [PATCH net-next 3/6] net: hns3: optimize the tx clean process Huazhong Tan
2020-09-14 12:06 ` [PATCH net-next 4/6] net: hns3: optimize the rx " Huazhong Tan
2020-09-14 12:06 ` [PATCH net-next 5/6] net: hns3: use writel() to optimize the barrier operation Huazhong Tan
2020-09-14 21:45 ` Jakub Kicinski
2020-09-15 1:41 ` Yunsheng Lin
2020-09-14 12:06 ` [PATCH net-next 6/6] net: hns3: use napi_consume_skb() when cleaning tx desc Huazhong Tan
2020-09-15 5:09 ` Saeed Mahameed
2020-09-15 7:04 ` Yunsheng Lin
2020-09-16 8:33 ` Saeed Mahameed [this message]
2020-09-16 8:38 ` Eric Dumazet
2020-09-17 6:52 ` Yunsheng Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f2a27306606ab6a882f6a6e4363d07174e55c745.camel@kernel.org \
--to=saeed@kernel.org \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=linyunsheng@huawei.com \
--cc=netdev@vger.kernel.org \
--cc=saeedm@nvidia.com \
--cc=salil.mehta@huawei.com \
--cc=tanhuazhong@huawei.com \
--cc=yisen.zhuang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®