From: Michael Baehr <tehdely_lkml@metawire.org>
To: Norberto Bensa <norberto+linux-kernel@bensa.ath.cx>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>
Subject: Re: mm-kernels, 4K stacks, and NVIDIA... am I crazy?
Date: Fri, 02 Apr 2004 13:10:05 -0600 [thread overview]
Message-ID: <f2bb65096cabc094256e21a2795b609c@localhost.localdomain> (raw)
In-Reply-To: <200404021121.46697.norberto+linux-kernel@bensa.ath.cx>
On 2004-04-02 08:21:46 -0600 Norberto Bensa
<norberto+linux-kernel@bensa.ath.cx> wrote:
> Michael Baehr wrote:
>> 06:55:05 <+delysid|~> grep 4K /usr/src/linux/.config
>> CONFIG_4KSTACKS=y
>> 06:55:08 <+delysid|~>
>>
>> And I have yet to have a single problem. In fact, everything is
>> working swimmingly!
>
> Are you sure you are using nvidia's binary driver?
>
> $ dmesg | grep nvidia
> $ grep -i nvidia /var/log/XF*
>
> Regards,
> Norberto
>
> PS: I'm recompiling my kernel with 4KSTACKS, but I doubt it will work.
>
>
Output of dmesg | grep nvidia:
nvidia: module license 'NVIDIA' taints kernel.
0: nvidia: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-5336
Wed Jan 14 18:29:26 PST 2004
Output of grep -i nvidia /var/log/XF* (I snipped some extraneous text
about sync ranges):
(**) | |-->Device "NVIDIA Quadro4 700 XGL"
(--) PCI:*(2:0:0) nVidia Corporation NV25GL [Quadro4 700 XGL] rev 163,
Mem @ 0xdc000000/24, 0xd4000000/26, 0xd8000000/19
(II) Module glx: vendor="NVIDIA Corporation"
(II) LoadModule: "nvidia"
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
(II) NVIDIA XFree86 Driver 1.0-5336 Wed Jan 14 18:30:46 PST 2004
(II) NVIDIA Unified Driver for all NVIDIA GPUs
(--) Chipset NVIDIA GPU found
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Option "NoDDC" "true"
(**) NVIDIA(0): Ignoring EDIDs
(--) NVIDIA(0): Linear framebuffer at 0xD4000000
(--) NVIDIA(0): MMIO registers at 0xDC000000
(II) NVIDIA(0): NVIDIA GPU detected as: Quadro4 700 XGL
(--) NVIDIA(0): VideoBIOS: 04.25.00.25.01
(--) NVIDIA(0): VideoRAM: 65536 kBytes
(II) NVIDIA(0): Connected display device(s): CRT-1
(--) NVIDIA(0): Display device CRT-1: maximum pixel clock at 8 bpp:
350 MHz
(--) NVIDIA(0): Display device CRT-1: maximum pixel clock at 16 bpp:
350 MHz
(--) NVIDIA(0): Display device CRT-1: maximum pixel clock at 32 bpp:
350 MHz
(II) NVIDIA(0): Not probing EDIDs.
(II) NVIDIA(0): Multiscan 420GS: Using hsync range of 30.00-96.00 kHz
(II) NVIDIA(0): Multiscan 420GS: Using vrefresh range of 48.00-120.00
Hz
< lots of snippage due to me not setting up hsync/vsync right in
XF86Config >
(II) NVIDIA(0): Clock range: 12.00 to 350.00 MHz
(II) NVIDIA(0): Virtual screen size determined to be 1600 x 1200
(==) NVIDIA(0): DPI set to (75, 75)
(II) NVIDIA(0): AGP 4X successfully initialized
(II) NVIDIA(0): Setting mode "1600x1200"
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled
(II) XINPUT: Adding extended input device "NVIDIA Event Handler"
(type: Other)
output of uname -a:
Linux Diwanda 2.6.5-rc3-mm3 #1 Thu Apr 1 01:21:12 CST 2004 i686
unknown unknown GNU/Linux
output of grep -i 4K /usr/src/linux-`uname -r`/.config:
CONFIG_4KSTACKS=y
Using XFree 4.4 btw (don't tell RMS :o )
-- Mike
next prev parent reply other threads:[~2004-04-02 19:07 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-04-02 12:56 Michael Baehr
2004-04-02 14:21 ` Norberto Bensa
2004-04-02 19:10 ` Michael Baehr [this message]
2004-04-07 1:48 Sid Boyce
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f2bb65096cabc094256e21a2795b609c@localhost.localdomain \
--to=tehdely_lkml@metawire.org \
--cc=linux-kernel@vger.kernel.org \
--cc=norberto+linux-kernel@bensa.ath.cx \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome