From: <Arun.Ramadoss@microchip.com>
To: <linux-kernel@vger.kernel.org>, <netdev@vger.kernel.org>,
<romain.naour@smile.fr>
Cc: <olteanv@gmail.com>, <UNGLinuxDriver@microchip.com>,
<vivien.didelot@gmail.com>, <andrew@lunn.ch>,
<linux@armlinux.org.uk>, <Tristram.Ha@microchip.com>,
<f.fainelli@gmail.com>,
<Prasanna.VengateshanVaradharajan@microchip.com>,
<kuba@kernel.org>, <edumazet@google.com>, <pabeni@redhat.com>,
<Woojung.Huh@microchip.com>, <davem@davemloft.net>,
<hkallweit1@gmail.com>
Subject: Re: [Patch net-next 1/5] net: dsa: microchip: determine number of port irq based on switch type
Date: Wed, 14 Sep 2022 03:41:09 +0000 [thread overview]
Message-ID: <f2f4209ea0807f22359c0aae3197a4a424d2dde1.camel@microchip.com> (raw)
In-Reply-To: <c1a1f948-9d7a-b0cf-3c38-3455c4bd2f4a@smile.fr>
Hi Romain,
On Tue, 2022-09-13 at 22:11 +0200, Romain Naour wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you
> know the content is safe
>
> Hi,
>
> Le 13/09/2022 à 18:04, Arun Ramadoss a écrit :
> > Currently the number of port irqs is hard coded for the lan937x
> > switch
> > as 6. In order to make the generic interrupt handler for ksz
> > switches,
> > number of port irq supported by the switch is added to the
> > ksz_chip_data. It is 4 for ksz9477, 2 for ksz9897 and 3 for
> > ksz9567.
>
> The ksz9896 has been added recently and it's close to the ksz9897.
> So it should get ".port_nirqs = 2" too?
>
> IIUC, to get the number of port irqs you have to look at table "Port
> Interrupt
> Mask Register" in the datasheet.
>
> 4 port irqs for the ksz9477: SGMII, PTP, PHY and ACL.
> 2 port irqs for the ksz9897/ksz9896: PHY and ACL.
> 3 port irqs for the ksz9567: PTP, PHY and ACL.
Thanks for pointing it out.
I will include .port_nirqs=2 for ksz9896 and send the v2 patch.
>
> Best regards,
> Romain
>
> >
> > Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
> > Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> > ---
> > drivers/net/dsa/microchip/ksz_common.c | 9 +++++++++
> > drivers/net/dsa/microchip/ksz_common.h | 1 +
> > drivers/net/dsa/microchip/lan937x_main.c | 4 +---
> > 3 files changed, 11 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/net/dsa/microchip/ksz_common.c
> > b/drivers/net/dsa/microchip/ksz_common.c
> > index fcaa71f66322..b91089a483e7 100644
> > --- a/drivers/net/dsa/microchip/ksz_common.c
> > +++ b/drivers/net/dsa/microchip/ksz_common.c
> > @@ -1168,6 +1168,7 @@ const struct ksz_chip_data ksz_switch_chips[]
> > = {
> > .num_statics = 16,
> > .cpu_ports = 0x7F, /* can be configured as cpu
> > port */
> > .port_cnt = 7, /* total physical port count
> > */
> > + .port_nirqs = 4,
> > .ops = &ksz9477_dev_ops,
> > .phy_errata_9477 = true,
> > .mib_names = ksz9477_mib_names,
> > @@ -1230,6 +1231,7 @@ const struct ksz_chip_data ksz_switch_chips[]
> > = {
> > .num_statics = 16,
> > .cpu_ports = 0x7F, /* can be configured as cpu
> > port */
> > .port_cnt = 7, /* total physical port count
> > */
> > + .port_nirqs = 2,
> > .ops = &ksz9477_dev_ops,
> > .phy_errata_9477 = true,
> > .mib_names = ksz9477_mib_names,
> > @@ -1259,6 +1261,7 @@ const struct ksz_chip_data ksz_switch_chips[]
> > = {
> > .num_statics = 16,
> > .cpu_ports = 0x07, /* can be configured as cpu
> > port */
> > .port_cnt = 3, /* total port count */
> > + .port_nirqs = 2,
> > .ops = &ksz9477_dev_ops,
> > .mib_names = ksz9477_mib_names,
> > .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
> > @@ -1283,6 +1286,7 @@ const struct ksz_chip_data ksz_switch_chips[]
> > = {
> > .num_statics = 16,
> > .cpu_ports = 0x7F, /* can be configured as cpu
> > port */
> > .port_cnt = 7, /* total physical port count
> > */
> > + .port_nirqs = 3,
> > .ops = &ksz9477_dev_ops,
> > .phy_errata_9477 = true,
> > .mib_names = ksz9477_mib_names,
> > @@ -1312,6 +1316,7 @@ const struct ksz_chip_data ksz_switch_chips[]
> > = {
> > .num_statics = 256,
> > .cpu_ports = 0x10, /* can be configured as cpu
> > port */
> > .port_cnt = 5, /* total physical port count
> > */
> > + .port_nirqs = 6,
> > .ops = &lan937x_dev_ops,
> > .mib_names = ksz9477_mib_names,
> > .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
> > @@ -1335,6 +1340,7 @@ const struct ksz_chip_data ksz_switch_chips[]
> > = {
> > .num_statics = 256,
> > .cpu_ports = 0x30, /* can be configured as cpu
> > port */
> > .port_cnt = 6, /* total physical port count
> > */
> > + .port_nirqs = 6,
> > .ops = &lan937x_dev_ops,
> > .mib_names = ksz9477_mib_names,
> > .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
> > @@ -1358,6 +1364,7 @@ const struct ksz_chip_data ksz_switch_chips[]
> > = {
> > .num_statics = 256,
> > .cpu_ports = 0x30, /* can be configured as cpu
> > port */
> > .port_cnt = 8, /* total physical port count
> > */
> > + .port_nirqs = 6,
> > .ops = &lan937x_dev_ops,
> > .mib_names = ksz9477_mib_names,
> > .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
> > @@ -1385,6 +1392,7 @@ const struct ksz_chip_data ksz_switch_chips[]
> > = {
> > .num_statics = 256,
> > .cpu_ports = 0x38, /* can be configured as cpu
> > port */
> > .port_cnt = 5, /* total physical port count
> > */
> > + .port_nirqs = 6,
> > .ops = &lan937x_dev_ops,
> > .mib_names = ksz9477_mib_names,
> > .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
> > @@ -1412,6 +1420,7 @@ const struct ksz_chip_data ksz_switch_chips[]
> > = {
> > .num_statics = 256,
> > .cpu_ports = 0x30, /* can be configured as cpu
> > port */
> > .port_cnt = 8, /* total physical port count
> > */
> > + .port_nirqs = 6,
> > .ops = &lan937x_dev_ops,
> > .mib_names = ksz9477_mib_names,
> > .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
> > diff --git a/drivers/net/dsa/microchip/ksz_common.h
> > b/drivers/net/dsa/microchip/ksz_common.h
> > index 6203dcd8c8f7..baa1e1bc1b7c 100644
> > --- a/drivers/net/dsa/microchip/ksz_common.h
> > +++ b/drivers/net/dsa/microchip/ksz_common.h
> > @@ -45,6 +45,7 @@ struct ksz_chip_data {
> > int num_statics;
> > int cpu_ports;
> > int port_cnt;
> > + u8 port_nirqs;
> > const struct ksz_dev_ops *ops;
> > bool phy_errata_9477;
> > bool ksz87xx_eee_link_erratum;
> > diff --git a/drivers/net/dsa/microchip/lan937x_main.c
> > b/drivers/net/dsa/microchip/lan937x_main.c
> > index 9b6760b1e572..7136d9c55315 100644
> > --- a/drivers/net/dsa/microchip/lan937x_main.c
> > +++ b/drivers/net/dsa/microchip/lan937x_main.c
> > @@ -20,8 +20,6 @@
> > #include "ksz_common.h"
> > #include "lan937x.h"
> >
> > -#define LAN937x_PNIRQS 6
> > -
> > static int lan937x_cfg(struct ksz_device *dev, u32 addr, u8 bits,
> > bool set)
> > {
> > return regmap_update_bits(dev->regmap[0], addr, bits, set ?
> > bits : 0);
> > @@ -697,7 +695,7 @@ static int lan937x_pirq_setup(struct ksz_device
> > *dev, u8 p)
> > int ret, irq;
> > int irq_num;
> >
> > - port->pirq.nirqs = LAN937x_PNIRQS;
> > + port->pirq.nirqs = dev->info->port_nirqs;
> > port->pirq.domain = irq_domain_add_simple(dev->dev->of_node,
> > port->pirq.nirqs,
> > 0,
> > &lan937x_pirq_domai
> > n_ops,
>
>
next prev parent reply other threads:[~2022-09-14 3:41 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-13 16:04 [Patch net-next 0/5] net: dsa: microchip: ksz9477: enable interrupt for internal phy link detection Arun Ramadoss
2022-09-13 16:04 ` [Patch net-next 1/5] net: dsa: microchip: determine number of port irq based on switch type Arun Ramadoss
2022-09-13 20:11 ` Romain Naour
2022-09-14 3:41 ` Arun.Ramadoss [this message]
2022-09-13 16:04 ` [Patch net-next 2/5] net: dsa: microchip: enable phy interrupts only if interrupt enabled in dts Arun Ramadoss
2022-09-13 16:04 ` [Patch net-next 3/5] net: dsa: microchip: lan937x: return zero if mdio node not present Arun Ramadoss
2022-09-13 16:04 ` [Patch net-next 4/5] net: dsa: microchip: move interrupt handling logic from lan937x to ksz_common Arun Ramadoss
2022-09-13 16:04 ` [Patch net-next 5/5] net: phy: micrel: enable interrupt for ksz9477 phy Arun Ramadoss
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f2f4209ea0807f22359c0aae3197a4a424d2dde1.camel@microchip.com \
--to=arun.ramadoss@microchip.com \
--cc=Prasanna.VengateshanVaradharajan@microchip.com \
--cc=Tristram.Ha@microchip.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=Woojung.Huh@microchip.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=romain.naour@smile.fr \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®