mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Joe Perches <joe@perches.com>
To: angkery <angkery@163.com>,
	linux@roeck-us.net, heikki.krogerus@linux.intel.com,
	gregkh@linuxfoundation.org
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	Junlin Yang <yangjunlin@yulong.com>
Subject: Re: [PATCH] usb: typec: tcpci_maxim: remove redundant assignment
Date: Sat, 23 Jan 2021 10:23:19 -0800	[thread overview]
Message-ID: <f2f9cb12ad9d1bdadec799452f0be08a6967e5f4.camel@perches.com> (raw)
In-Reply-To: <20210123101410.1354-1-angkery@163.com>

> diff --git a/drivers/usb/typec/tcpm/tcpci_maxim.c b/drivers/usb/typec/tcpm/tcpci_maxim.c
On Sat, 2021-01-23 at 18:14 +0800, angkery wrote:
> From: Junlin Yang <yangjunlin@yulong.com>
> 
> PTR_ERR(chip->tcpci) has been used as a return value,
> it is not necessary to assign it to ret, so remove it.
[]
[]
> @@ -461,7 +461,6 @@ static int max_tcpci_probe(struct i2c_client *client, const struct i2c_device_id
>  	chip->tcpci = tcpci_register_port(chip->dev, &chip->data);
>  	if (IS_ERR(chip->tcpci)) {
>  		dev_err(&client->dev, "TCPCI port registration failed");

could add terminating '\n' to the formats where missed too.

> -		ret = PTR_ERR(chip->tcpci);
>  		return PTR_ERR(chip->tcpci);
>  	}
>  	chip->port = tcpci_get_tcpm_port(chip->tcpci);
---
diff --git a/drivers/usb/typec/tcpm/tcpci_maxim.c b/drivers/usb/typec/tcpm/tcpci_maxim.c
index 319266329b42..a51cd1682170 100644
--- a/drivers/usb/typec/tcpm/tcpci_maxim.c
+++ b/drivers/usb/typec/tcpm/tcpci_maxim.c
@@ -158,7 +158,7 @@ static void process_rx(struct max_tcpci_chip *chip, u16 status)
 	 */
 	ret = regmap_raw_read(chip->data.regmap, TCPC_RX_BYTE_CNT, rx_buf, 2);
 	if (ret < 0) {
-		dev_err(chip->dev, "TCPC_RX_BYTE_CNT read failed ret:%d", ret);
+		dev_err(chip->dev, "TCPC_RX_BYTE_CNT read failed ret:%d\n", ret);
 		return;
 	}
 
@@ -167,13 +167,13 @@ static void process_rx(struct max_tcpci_chip *chip, u16 status)
 
 	if (count == 0 || frame_type != TCPC_RX_BUF_FRAME_TYPE_SOP) {
 		max_tcpci_write16(chip, TCPC_ALERT, TCPC_ALERT_RX_STATUS);
-		dev_err(chip->dev, "%s", count ==  0 ? "error: count is 0" :
+		dev_err(chip->dev, "%s\n", count ==  0 ? "error: count is 0" :
 			"error frame_type is not SOP");
 		return;
 	}
 
 	if (count > sizeof(struct pd_message) || count + 1 > TCPC_RECEIVE_BUFFER_LEN) {
-		dev_err(chip->dev, "Invalid TCPC_RX_BYTE_CNT %d", count);
+		dev_err(chip->dev, "Invalid TCPC_RX_BYTE_CNT %d\n", count);
 		return;
 	}
 
@@ -184,7 +184,7 @@ static void process_rx(struct max_tcpci_chip *chip, u16 status)
 	count += 1;
 	ret = regmap_raw_read(chip->data.regmap, TCPC_RX_BYTE_CNT, rx_buf, count);
 	if (ret < 0) {
-		dev_err(chip->dev, "Error: TCPC_RX_BYTE_CNT read failed: %d", ret);
+		dev_err(chip->dev, "Error: TCPC_RX_BYTE_CNT read failed: %d\n", ret);
 		return;
 	}
 
@@ -317,7 +317,7 @@ static irqreturn_t _max_tcpci_irq(struct max_tcpci_chip *chip, u16 status)
 			return ret;
 
 		if (reg_status & TCPC_SINK_FAST_ROLE_SWAP) {
-			dev_info(chip->dev, "FRS Signal");
+			dev_info(chip->dev, "FRS Signal\n");
 			tcpm_sink_frs(chip->port);
 		}
 	}
@@ -460,7 +460,7 @@ static int max_tcpci_probe(struct i2c_client *client, const struct i2c_device_id
 	max_tcpci_init_regs(chip);
 	chip->tcpci = tcpci_register_port(chip->dev, &chip->data);
 	if (IS_ERR(chip->tcpci)) {
-		dev_err(&client->dev, "TCPCI port registration failed");
+		dev_err(&client->dev, "TCPCI port registration failed\n");
 		ret = PTR_ERR(chip->tcpci);
 		return PTR_ERR(chip->tcpci);
 	}



      parent reply	other threads:[~2021-01-23 18:25 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-23 10:14 angkery
2021-01-23 14:30 ` Guenter Roeck
2021-01-23 18:23 ` Joe Perches [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f2f9cb12ad9d1bdadec799452f0be08a6967e5f4.camel@perches.com \
    --to=joe@perches.com \
    --cc=angkery@163.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=yangjunlin@yulong.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®