Re: [PATCH v4 3/3] arm64: dts: imx93: Add phyBOARD-Segin-i.MX93 support

From: Stefan Wahren <wahrenst@gmx.net>
To: Mathieu Othacehe <othacehe@gnu.org>, Wadim Egorov <w.egorov@phytec.de>
Cc: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>, Li Yang <leoyang.li@nxp.com>,
	Primoz Fiser <primoz.fiser@norik.com>,
	Christoph Stoidner <c.stoidner@phytec.de>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, upstream@lists.phytec.de
Subject: Re: [PATCH v4 3/3] arm64: dts: imx93: Add phyBOARD-Segin-i.MX93 support
Date: Wed, 24 Jan 2024 18:28:07 +0100	[thread overview]
Message-ID: <f2fcb4d4-b1d7-4d82-a3b0-d06c0ffd906b@gmx.net> (raw)
In-Reply-To: <87o7da4zc1.fsf@gnu.org>

Hello Mathieu,

Am 24.01.24 um 14:48 schrieb Mathieu Othacehe:
> Hello Stefan,
>
>>> Defining line names should be fine. But I would still prefer to have
>>> the muxing in an overlay bound to a specific use case.
>> I'm fine with this. Unfortunately Mathieu dropped the line names in V5
>> today :-(
>>
>> AFAIR reviewers should have 2 weeks time maximum. This was just 2 days.
> I am sorry but it is not easy for me to deal with contradictory input. I
> chose to remove the gpio-line-names even though it also seemed like a
> nice addition to me. The idea was to not interfere with Phytec plans in
> the future.
tbh sending v5 before the discussion between Wadim and me was finished
made it more complicated. Please keep in mind that some reviewers do
this in their spare time, so a response could take some time.

In this particular case Wadim and me agreed on a solution, so no action
from your side was necessary except a little bit patience.

The reason why i suggested the gpio-line-names in the first place is
that users doesn't need to care about different versions of the DT files
(except the downstream one). Changing the line names afterwards leads to
confusion.

So before we discuss on a v6, just a question: are on the X16 connector
just 2 pins muxable as GPIO? This is hard to believe.

Best regards
> There is no hurry and I can always restore them in a v6.
>
> Let me know what you think,
>
> Thanks,
>
> Mathieu
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel