mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: Wentao Liang <vulab@iscas.ac.cn>
Cc: Shyam-sundar.S-k@amd.com, Hans de Goede <hansg@kernel.org>,
	 LKML <linux-kernel@vger.kernel.org>,
	mario.limonciello@amd.com,  platform-driver-x86@vger.kernel.org,
	stable@vger.kernel.org
Subject: Re: [PATCH] platform/x86/amd/pmc: Fix RTC device leak in amd_pmc_verify_czn_rtc()
Date: Thu, 17 Sep 2026 17:06:10 +0300 (EEST)	[thread overview]
Message-ID: <f320a056-78a6-c33b-9d75-8298f140283b@linux.intel.com> (raw)
In-Reply-To: <20260917135854.2154187-1-vulab@iscas.ac.cn>

On Thu, 17 Sep 2026, Wentao Liang wrote:

> rtc_class_open() takes a reference to the RTC device, but all paths
> that return after it succeeded, apart from the final one where the
> alarm is programmed, leave the function without dropping it. Route
> them through a common exit that calls rtc_class_close().
> 
> Fixes: 59348401ebed ("platform/x86: amd-pmc: Add special handling for timer based S0i3 wakeup")
> Cc: stable@vger.kernel.org
> Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
> ---
>  drivers/platform/x86/amd/pmc/pmc.c | 21 ++++++++++++++-------
>  1 file changed, 14 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/platform/x86/amd/pmc/pmc.c b/drivers/platform/x86/amd/pmc/pmc.c
> index cae3fcafd4d7..f40e8d9b124a 100644
> --- a/drivers/platform/x86/amd/pmc/pmc.c
> +++ b/drivers/platform/x86/amd/pmc/pmc.c
> @@ -569,32 +569,39 @@ static int amd_pmc_verify_czn_rtc(struct amd_pmc_dev *pdev, u32 *arg)
>  		return 0;
>  	rc = rtc_read_alarm(rtc_device, &alarm);
>  	if (rc)
> -		return rc;
> +		goto out;
>  	if (!alarm.enabled) {
>  		dev_dbg(pdev->dev, "alarm not enabled\n");
> -		return 0;
> +		rc = 0;
> +		goto out;
>  	}
>  	rc = rtc_read_time(rtc_device, &tm);
>  	if (rc)
> -		return rc;
> +		goto out;
>  	then = rtc_tm_to_time64(&alarm.time);
>  	now = rtc_tm_to_time64(&tm);
>  	duration = then-now;
>  
>  	/* in the past */
> -	if (then < now)
> -		return 0;
> +	if (then < now) {
> +		rc = 0;
> +		goto out;
> +	}
>  
>  	/* will be stored in upper 16 bits of s0i3 hint argument,
>  	 * so timer wakeup from s0i3 is limited to ~18 hours or less
>  	 */
> -	if (duration <= 4 || duration > U16_MAX)
> -		return -EINVAL;
> +	if (duration <= 4 || duration > U16_MAX) {
> +		rc = -EINVAL;
> +		goto out;
> +	}
>  
>  	*arg |= (duration << 16);
>  	rc = rtc_alarm_irq_enable(rtc_device, 0);
>  	pm_pr_dbg("wakeup timer programmed for %lld seconds\n", duration);
>  
> +out:
> +	rtc_class_close(rtc_device);
>  	return rc;
>  }

I was expecting 2 patch series, with one which adds the DEFINE_FREE() into 
the public rtc header, not going back to the old approach. You also seemed 
to forget to increase the version number in the subject.

-- 
 i.


  reply	other threads:[~2026-09-17 14:06 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-17 13:58 Wentao Liang
2026-09-17 14:06 ` Ilpo Järvinen [this message]
2026-09-17 14:09   ` Ilpo Järvinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f320a056-78a6-c33b-9d75-8298f140283b@linux.intel.com \
    --to=ilpo.jarvinen@linux.intel.com \
    --cc=Shyam-sundar.S-k@amd.com \
    --cc=hansg@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mario.limonciello@amd.com \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=vulab@iscas.ac.cn \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®