Re: [PATCH v4 2/2] staging: iio: ad7780: remove unnecessary stashed voltage value

["Ardelean, Alexandru" <alexandru.Ardelean@analog.com>]

On Mon, 2018-11-05 at 17:16 -0200, Renato Lui Geh wrote:
> This patch removes the unnecessary field int_vref_mv in ad7780_state
> referring to the device's voltage.
> 

Looks good from my side.

Alex

> Signed-off-by: Renato Lui Geh <renatogeh@gmail.com>
> ---
> Changes in v3:
> 	- removed unnecessary int_vref_mv from ad7780_state
> Changes in v4:
> 	- removed voltage reading on probe
> 
>  drivers/staging/iio/adc/ad7780.c | 9 +--------
>  1 file changed, 1 insertion(+), 8 deletions(-)
> 
> diff --git a/drivers/staging/iio/adc/ad7780.c
> b/drivers/staging/iio/adc/ad7780.c
> index c7cb05cedbbc..52a914360574 100644
> --- a/drivers/staging/iio/adc/ad7780.c
> +++ b/drivers/staging/iio/adc/ad7780.c
> @@ -42,7 +42,6 @@ struct ad7780_state {
>  	struct regulator		*reg;
>  	struct gpio_desc		*powerdown_gpio;
>  	unsigned int	gain;
> -	u16				int_vref_mv;
>  
>  	struct ad_sigma_delta sd;
>  };
> @@ -165,7 +164,7 @@ static int ad7780_probe(struct spi_device *spi)
>  {
>  	struct ad7780_state *st;
>  	struct iio_dev *indio_dev;
> -	int ret, voltage_uv = 0;
> +	int ret;
>  
>  	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
>  	if (!indio_dev)
> @@ -185,16 +184,10 @@ static int ad7780_probe(struct spi_device *spi)
>  		dev_err(&spi->dev, "Failed to enable specified AVdd
> supply\n");
>  		return ret;
>  	}
> -	voltage_uv = regulator_get_voltage(st->reg);
>  
>  	st->chip_info =
>  		&ad7780_chip_info_tbl[spi_get_device_id(spi)->driver_data];
>  
> -	if (voltage_uv)
> -		st->int_vref_mv = voltage_uv / 1000;
> -	else
> -		dev_warn(&spi->dev, "Reference voltage unspecified\n");
> -
>  	spi_set_drvdata(spi, indio_dev);
>  
>  	indio_dev->dev.parent = &spi->dev;