From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 0A75B42AA6; Fri, 27 Jun 2025 06:29:07 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=205.220.168.131 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1751005750; cv=none; b=LXIQKIyA+P/NVN8DoEH/kD0bcoc5viHgVLtnxeO50yQdcNIfdwikcnuNIWgfNhvokjLi+JA0LAzrd6tJMOcU7OPL4x2G/9W/fHrcT56g65kiErr+HCUMVIqEoi8t+0dYgUN9xBH7PwWisoy9W99g64bIzP1HgDB0M7x1/SmaKnU= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1751005750; c=relaxed/simple; bh=G2Uh7pRhbJX6tgZzXdpavUrERUb/fV2QNsAN0Itu+8Q=; h=Message-ID:Date:MIME-Version:Subject:To:CC:References:From: In-Reply-To:Content-Type; b=LTuPlluC5HGpHzH7TWUMZjXqwTp0g4VEhK7hUY4+FK+ckqu0xFVmUupjVmsF54/LNVyzyokkZ24xT82JEk1G0BxZxkkNsnF4w2t00druWIwHr14CQV9DMAlAON5aguSDHF41RyWX91Lh0blPp+j97so9dvMNsQxDalqykp3sKZE= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=quicinc.com; spf=pass smtp.mailfrom=quicinc.com; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b=lIPGj/kr; arc=none smtp.client-ip=205.220.168.131 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=quicinc.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=quicinc.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="lIPGj/kr" Received: from pps.filterd (m0279863.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.18.1.2/8.18.1.2) with ESMTP id 55R4DAWs014323; Fri, 27 Jun 2025 06:28:55 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h= cc:content-transfer-encoding:content-type:date:from:in-reply-to :message-id:mime-version:references:subject:to; s=qcppdkim1; bh= 6WF27joapwifXMGp6EvCTz8O6l4TdWUvEyF6W8M1+4M=; b=lIPGj/krJT2ai1XD XRung/NJpJd5jurKiCnMWwuVEKGbLUDemBPTqzxy5P4ou++smD/KArh3ZMnoWVRG QCXK0Q54wbCCmEY/wuFKr0HK1aAesrNCgRTPb2L7Ta4SYRCRwTAeRkmhq8iFskPV a/aYHfM2pzF+Q3GujLx6SOjrVmW3ZWgkgvc8oS/A/+R+1exuseQrc23Ay0a4Ij4l lx5iUYW3HxybvlyrHHUjIAiPBX98v7oBZkdc8PkVnuhH1M2sn6JPj9AZkumfSsow onZkRDAPxJh+AGpSlnyU7eTi+u1UElqActLuJix0xZdr0C3Tsp0BfCb5AhwbqqdI E9IZ7A== Received: from nasanppmta04.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 47emcmye51-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Fri, 27 Jun 2025 06:28:55 +0000 (GMT) Received: from nasanex01b.na.qualcomm.com (nasanex01b.na.qualcomm.com [10.46.141.250]) by NASANPPMTA04.qualcomm.com (8.18.1.2/8.18.1.2) with ESMTPS id 55R6SsEZ020768 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Fri, 27 Jun 2025 06:28:54 GMT Received: from [10.239.133.242] (10.80.80.8) by nasanex01b.na.qualcomm.com (10.46.141.250) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1544.9; Thu, 26 Jun 2025 23:28:51 -0700 Message-ID: Date: Fri, 27 Jun 2025 14:28:44 +0800 Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 User-Agent: Mozilla Thunderbird Subject: Re: [PATCH v5 0/7] Provides support for Trigger Generation Unit To: Suzuki K Poulose , Mike Leach , James Clark , Alexander Shishkin , Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Conor Dooley CC: , , , , References: <20250529081949.26493-1-quic_songchai@quicinc.com> Content-Language: en-US From: Songwei Chai In-Reply-To: <20250529081949.26493-1-quic_songchai@quicinc.com> Content-Type: text/plain; charset="UTF-8"; format=flowed Content-Transfer-Encoding: 8bit X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nasanex01b.na.qualcomm.com (10.46.141.250) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: qpdQHggkrbMiqtTZy24MreTFdRz8zD8U X-Proofpoint-ORIG-GUID: qpdQHggkrbMiqtTZy24MreTFdRz8zD8U X-Authority-Analysis: v=2.4 cv=J+eq7BnS c=1 sm=1 tr=0 ts=685e3a27 cx=c_pps a=JYp8KDb2vCoCEuGobkYCKw==:117 a=JYp8KDb2vCoCEuGobkYCKw==:17 a=GEpy-HfZoHoA:10 a=IkcTkHD0fZMA:10 a=6IFa9wvqVegA:10 a=VwQbUJbxAAAA:8 a=COk6AnOGAAAA:8 a=6ly4gMjjRaOz-lKr_OYA:9 a=jWg8M_cAZNhw4cqM:21 a=3ZKOabzyN94A:10 a=QEXdDO2ut3YA:10 a=TjNXssC_j7lpFel5tvFf:22 X-Proofpoint-Spam-Details-Enc: AW1haW4tMjUwNjI3MDA1MCBTYWx0ZWRfXyTmS0f0RjeSQ XYXHvpDL25Rt+32amJjKBMdl1YerMlXtD1qLs3p7mKxZBpSLZ2DCEX42BDJSQYfHBi1S+jRs8dJ xFc6o4UVEZuzQ1iibSI0lFkqGp/8zwaRcudZJCLtgOps3S5jeQrzz+dsoPNYOMEToPXZkZ/HnTz tcM/Zv7UU40tCtOGvgyER9jdgEFoTHnQVHZzC0vkmptaEYGdeReLY9bG7EzApEew/2fhwbf3Qva Lc9+QY948lOk1pun9qGSx/0Cn5NGo0hlKLkgMhB9rkE2oz/Cn0kTQzn5bx9XF17pw4U0W6GTASv +4iet4cEEESoKmU2GF9ZAvpPiglGf/Rb2oZTJ5Qeuhd4XYIIlYEvaPP9PrdgKPvpWlK05P/zf6J kLVqGuJ8dlst6UY6sKFsnwsu94nj3b75+Hck4h/oGvclgMRkqe5b5TOHtl++h9biNEVW0BNO X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.293,Aquarius:18.0.1099,Hydra:6.1.7,FMLib:17.12.80.40 definitions=2025-06-27_02,2025-06-26_05,2025-03-28_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 bulkscore=0 mlxlogscore=999 adultscore=0 impostorscore=0 clxscore=1015 spamscore=0 malwarescore=0 phishscore=0 priorityscore=1501 suspectscore=0 mlxscore=0 lowpriorityscore=0 classifier=spam authscore=0 authtc=n/a authcc= route=outbound adjust=0 reason=mlx scancount=1 engine=8.19.0-2505280000 definitions=main-2506270050 Hope this message finds you well. Just following up on my previous message - I'd greatly appreciate your response when you have a moment. Looking forward to hearing from you. :-) BRs, Songwei On 5/29/2025 4:19 PM, Songwei Chai wrote: > Provide support for the TGU (Trigger Generation Unit), which can be > utilized to sense a plurality of signals and create a trigger into > the CTI or generate interrupts to processors once the input signal > meets the conditions. We can treat the TGU’s workflow as a flowsheet, > it has some “steps” regions for customization. In each step region, > we can set the signals that we want with priority in priority_group, set > the conditions in each step via condition_decode, and set the resultant > action by condition_select. Meanwhile, some TGUs (not all) also provide > timer/counter functionality. Based on the characteristics described > above, we consider the TGU as a helper in the CoreSight subsystem. > Its master device is the TPDM, which can transmit signals from other > subsystems, and we reuse the existing ports mechanism to link the TPDM to > the connected TGU. > > Here is a detailed example to explain how to use the TGU: > > In this example, the TGU is configured to use 2 conditions, 2 steps, and > the timer. The goal is to look for one of two patterns which are generated > from TPDM, giving priority to one, and then generate a trigger once the > timer reaches a certain value. In other words, two conditions are used > for the first step to look for the two patterns, where the one with the > highest priority is used in the first condition. Then, in the second step, > the timer is enabled and set to be compared to the given value at each > clock cycle. These steps are better shown below. > > |-----------------| > | | > | TPDM | > | | > |-----------------| > | > | > --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ------ > | | | > | | |--------------------| | > | |---- ---> | | Go to next steps | | > | | | |--- ---> | Enable timer | | > | | v | | | | > | | |-----------------| | |--------------------| | > | | | | Yes | | | > | | | inputs==0xB | ----->| | <-------- | > | | | | | | No | | > | No | |-----------------| | v | | > | | | | |-----------------| | | > | | | | | | | | > | | | | | timer>=3 |-- | > | | v | | | | > | | |-----------------| | |-----------------| | > | | | | Yes | | | > | |--- | inputs==0xA | ----->| | Yes | > | | | | | > | |-----------------| v | > | |-----------------| | > | | | | > | | Trigger | | > | | | | > | |-----------------| | > | TGU | | > |--- --- --- --- --- --- --- --- --- --- --- --- --- --- |--- --- -- | > | > v > |-----------------| > |The controllers | > |which will use | > |triggers further | > |-----------------| > > steps: > 1. Reset TGU /*it will disable tgu and reset dataset*/ > - echo 1 > /sys/bus/coresight/devices//reset_tgu > > 2. Set the pattern match for priority0 to 0xA = 0b1010 and for > priority 1 to 0xB = 0b1011. > - echo 0x11113232 > /sys/bus/coresight/devices//step0_priority0/reg0 > - echo 0x11113233 > /sys/bus/coresight/devices//step0_priority1/reg0 > > Note: > Bit distribution diagram for each priority register > |-------------------------------------------------------------------| > | Bits | Field Nam | Description | > |-------------------------------------------------------------------| > | | | 00 = bypass for OR output | > | 29:28 | SEL_BIT7_TYPE2 | 01 = bypass for AND output | > | | | 10 = sense input '0' is true| > | | | 11 = sense input '1' is true| > |-------------------------------------------------------------------| > | | | 00 = bypass for OR output | > | 25:24 | SEL_BIT6_TYPE2 | 01 = bypass for AND output | > | | | 10 = sense input '0' is true| > | | | 11 = sense input '1' is true| > |-------------------------------------------------------------------| > | | | 00 = bypass for OR output | > | 21:20 | SEL_BIT5_TYPE2 | 01 = bypass for AND output | > | | | 10 = sense input '0' is true| > | | | 11 = sense input '1' is true| > |-------------------------------------------------------------------| > | | | 00 = bypass for OR output | > | 17:16 | SEL_BIT4_TYPE2 | 01 = bypass for AND output | > | | | 10 = sense input '0' is true| > | | | 11 = sense input '1' is true| > |-------------------------------------------------------------------| > | | | 00 = bypass for OR output | > | 13:12 | SEL_BIT3_TYPE2 | 01 = bypass for AND output | > | | | 10 = sense input '0' is true| > | | | 11 = sense input '1' is true| > |-------------------------------------------------------------------| > | | | 00 = bypass for OR output | > | 9:8 | SEL_BIT2_TYPE2 | 01 = bypass for AND output | > | | | 10 = sense input '0' is true| > | | | 11 = sense input '1' is true| > |-------------------------------------------------------------------| > | | | 00 = bypass for OR output | > | 5:4 | SEL_BIT1_TYPE2 | 01 = bypass for AND output | > | | | 10 = sense input '0' is true| > | | | 11 = sense input '1' is true| > |-------------------------------------------------------------------| > | | | 00 = bypass for OR output | > | 1:0 | SEL_BIT0_TYPE2 | 01 = bypass for AND output | > | | | 10 = sense input '0' is true| > | | | 11 = sense input '1' is true| > |-------------------------------------------------------------------| > These bits are used to identify the signals we want to sense, with > a maximum signal number of 140. For example, to sense the signal > 0xA (binary 1010), we set the value of bits 0 to 13 to 3232, which > represents 1010. The remaining bits are set to 1, as we want to use > AND gate to summarize all the signals we want to sense here. For > rising or falling edge detection of any input to the priority, set > the remaining bits to 0 to use an OR gate. > > 3. look for the pattern for priority_i i=0,1. > - echo 0x3 > /sys/bus/coresight/devices//step0_condition_decode/reg0 > - echo 0x30 > /sys/bus/coresight/devices//step0_condition_decode/reg1 > > |-------------------------------------------------------------------------------| > | Bits | Field Nam | Description | > |-------------------------------------------------------------------------------| > | | |For each decoded condition, this | > | 24 | NOT |inverts the output. If the condition | > | | |decodes to true, and the NOT field | > | | |is '1', then the output is NOT true. | > |-------------------------------------------------------------------------------| > | | |When '1' the output from the associated| > | 21 | BC0_COMP_ACTIVE |comparator will be actively included in| > | | |the decoding of this particular | > | | |condition. | > |-------------------------------------------------------------------------------| > | | |When '1' the output from the associated| > | | |comparator will need to be 1 to affect | > | 20 | BC0_COMP_HIGH |the decoding of this condition. | > | | |Conversely, a '0' here requires a '0' | > | | |from the comparator | > |-------------------------------------------------------------------------------| > | | |When '1' the output from the associated| > | 17 | |comparator will be actively included in| > | | TC0_COMP_ACTIVE |the decoding of this particular | > | | |condition. | > |-------------------------------------------------------------------------------| > | | |When '1' the output from the associated| > | | |comparator will need to be 1 to affect | > | 16 | TC0_COMP_HIGH |the decoding of this particular | > | | |condition.Conversely, a 0 here | > | | |requires a '0' from the comparator | > |-------------------------------------------------------------------------------| > | | |When '1' the output from Priority_n | > | | |OR logic will be actively | > | 4n+3 | Priority_n_OR_ACTIVE|included in the decoding of | > | | (n=0,1,2,3) |this particular condition. | > | | | | > |-------------------------------------------------------------------------------| > | | |When '1' the output from Priority_n | > | | |will need to be '1' to affect the | > | 4n+2 | Priority_n_OR_HIGH |decoding of this particular | > | | (n=0,1,2,3) |condition. Conversely, a '0' here | > | | |requires a '0' from Priority_n OR logic| > |-------------------------------------------------------------------------------| > | | |When '1' the output from Priority_n | > | | |AND logic will be actively | > | 4n+1 |Priority_n_AND_ACTIVE|included in the decoding of this | > | | (n=0,1,2,3) |particular condition. | > | | | | > |-------------------------------------------------------------------------------| > | | |When '1' the output from Priority_n | > | | |AND logic will need to be '1' to | > | 4n | Priority_n_AND_HIGH |affect the decoding of this | > | | (n=0,1,2,3) |particular condition. Conversely, | > | | |a '0' here requires a '0' from | > | | |Priority_n AND logic. | > |-------------------------------------------------------------------------------| > Since we use `priority_0` and `priority_1` with an AND output in step 2, we set `0x3` > and `0x30` here to activate them. > > 4. Set NEXT_STEP = 1 and TC0_ENABLE = 1 so that when the conditions > are met then the next step will be step 1 and the timer will be enabled. > - echo 0x20008 > /sys/bus/coresight/devices//step0_condition_select/reg0 > - echo 0x20008 > /sys/bus/coresight/devices//step0_condition_select/reg1 > > |-----------------------------------------------------------------------------| > | Bits | Field Nam | Description | > |-----------------------------------------------------------------------------| > | | |This field defines the next step the | > | 18:17 | NEXT_STEP |TGU will 'goto' for the associated | > | | |Condition and Step. | > |-----------------------------------------------------------------------------| > | | |For each possible output trigger | > | 13 | TRIGGER |available, set a '1' if you want | > | | |the trigger to go active for the | > | | |associated condition and Step. | > |-----------------------------------------------------------------------------| > | | |This will cause BC0 to increment if the| > | 9 | BC0_INC |associated Condition is decoded for | > | | |this step. | > |-----------------------------------------------------------------------------| > | | |This will cause BC0 to decrement if the| > | 8 | BC0_DEC |associated Condition is decoded for | > | | |this step. | > |-----------------------------------------------------------------------------| > | | |This will clear BC0 count value to 0 if| > | 7 | BC0_CLEAR |the associated Condition is decoded | > | | |for this step. | > |-----------------------------------------------------------------------------| > | | |This will cause TC0 to increment until | > | 3 | TC0_ENABLE |paused or cleared if the associated | > | | |Condition is decoded for this step. | > |-----------------------------------------------------------------------------| > | | |This will cause TC0 to pause until | > | 2 | TC0_PAUSE |enabled if the associated Condition | > | | |is decoded for this step. | > |-----------------------------------------------------------------------------| > | | |This will clear TC0 count value to 0 | > | 1 | TC0_CLEAR |if the associated Condition is | > | | |decoded for this step. | > |-----------------------------------------------------------------------------| > | | |This will set the done signal to the | > | 0 | DONE |TGU FSM if the associated Condition | > | | |is decoded for this step. | > |-----------------------------------------------------------------------------| > Based on the distribution diagram, we set `0x20008` for `priority0` and `priority1` to > achieve "jump to step 1 and enable TC0" once the signal is sensed. > > 5. activate the timer comparison for this step. > - echo 0x30000 > /sys/bus/coresight/devices//step1_condition_decode/reg0 > > |-------------------------------------------------------------------------------| > | | |When '1' the output from the associated| > | 17 | |comparator will be actively included in| > | | TC0_COMP_ACTIVE |the decoding of this particular | > | | |condition. | > |-------------------------------------------------------------------------------| > | | |When '1' the output from the associated| > | | |comparator will need to be 1 to affect | > | 16 | TC0_COMP_HIGH |the decoding of this particular | > | | |condition.Conversely, a 0 here | > | | |requires a '0' from the comparator | > |-------------------------------------------------------------------------------| > Accroding to the decode distribution diagram , we give 0x30000 here to set 16th&17th bit > to enable timer comparison. > > 6. Set the NEXT_STEP = 0 and TC0_PAUSE = 1 and TC0_CLEAR = 1 once the timer > has reached the given value. > - echo 0x6 > /sys/bus/coresight/devices//step1_condition_select/reg0 > > 7. Enable Trigger 0 for TGU when the condition 0 is met in step1, > i.e. when the timer reaches 3. > - echo 0x2000 > /sys/bus/coresight/devices//step1_condition_select/default > > Note: > 1. 'default' register allows for establishing the resultant action for > the default condition > > 2. Trigger:For each possible output trigger available from > the Design document, there are three triggers: interrupts, CTI, > and Cross-TGU mapping.All three triggers can occur, but > the choice of which trigger to use depends on the user's > needs. > > 8. Compare the timer to 3 in step 1. > - echo 0x3 > /sys/bus/coresight/devices//step1_timer/reg0 > > 9. enale tgu > - echo 1 > /sys/bus/coresight/devices//enable_tgu > > --- > Link to V4: https://patchwork.kernel.org/project/linux-arm-msm/cover/20250423101054.954066-1-quic_songchai@quicinc.com/ > > Changes in V5: > - Update publish date and kernel_version in "sysfs-bus-coresight-devices-tgu" > --- > Link to V3: https://lore.kernel.org/all/20250227092640.2666894-1-quic_songchai@quicinc.com/ > > Changes in V4: > - Add changlog in coverletter. > - Correct 'year' in Copyright in patch1. > - Correct port mechansim description in patch1. > - Remove 'tgu-steps','tgu-regs','tgu-conditions','tgu-timer-counters' from dt-binding > and set them through reading DEVID register as per Mike's suggestion. > - Modify tgu_disable func to make it have single return point in patch2 as per > Mike's suggestion. > - Use sysfs_emit in enable_tgu_show func in ptach2. > - Remove redundant judgement in enable_tgu_store in patch2. > - Correct typo in description in patch3. > - Set default ret as SYSFS_GROUP_INVISIBLE, and returnret at end in pacth3 as > per Mike's suggestion. > - Remove tgu_dataset_ro definition in patch3 > - Use #define constants with explanations of what they are rather than > arbitrary magic numbers in patch3 and patch4. > - Check -EINVAL before using 'calculate_array_location()' in array in patch4. > - Add 'default' in 'tgu_dataset_show''s switch part in patch4. > - Document the value needed to initiate the reset in pacth7. > - Check "value" in 'reset_tgu_store' and bail out with an error code if 0 in patch7. > - Remove dev_dbg in 'reset_tgu_store' in patch7. > --- > Link to V2: https://lore.kernel.org/all/20241010073917.16023-1-quic_songchai@quicinc.com/ > > Changes in V3: > - Correct typo and format in dt-binding in patch1 > - Rebase to the latest kernel version > --- > Link to V1: https://lore.kernel.org/all/20240830092311.14400-1-quic_songchai@quicinc.com/ > > Changes in V2: > - Use real name instead of login name, > - Correct typo and format in dt-binding and code. > - Bring order in tgu_prob(declarations with and without assignments) as per > Krzysztof's suggestion. > - Add module device table in patch2. > - Set const for tgu_common_grp and tgu_ids in patch2. > - Initialize 'data' in tgu_ids to fix the warning in pacth2. > --- > > Songwei Chai (7): > dt-bindings: arm: Add support for Coresight TGU trace > coresight: Add coresight TGU driver > coresight-tgu: Add signal priority support > coresight-tgu: Add TGU decode support > coresight-tgu: add support to configure next action > coresight-tgu: add timer/counter functionality for TGU > coresight-tgu: add reset node to initialize > > .../testing/sysfs-bus-coresight-devices-tgu | 51 ++ > .../bindings/arm/qcom,coresight-tgu.yaml | 92 +++ > drivers/hwtracing/coresight/Kconfig | 11 + > drivers/hwtracing/coresight/Makefile | 1 + > drivers/hwtracing/coresight/coresight-tgu.c | 780 ++++++++++++++++++ > drivers/hwtracing/coresight/coresight-tgu.h | 255 ++++++ > 6 files changed, 1190 insertions(+) > create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight-devices-tgu > create mode 100644 Documentation/devicetree/bindings/arm/qcom,coresight-tgu.yaml > create mode 100644 drivers/hwtracing/coresight/coresight-tgu.c > create mode 100644 drivers/hwtracing/coresight/coresight-tgu.h >