From: Paolo Bonzini <pbonzini@redhat.com>
To: Sean Christopherson <seanjc@google.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>,
Janosch Frank <frankja@linux.ibm.com>,
Claudio Imbrenda <imbrenda@linux.ibm.com>,
Vitaly Kuznetsov <vkuznets@redhat.com>,
Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>, Joerg Roedel <joro@8bytes.org>,
David Hildenbrand <david@redhat.com>,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
David Matlack <dmatlack@google.com>,
Ben Gardon <bgardon@google.com>,
Mingwei Zhang <mizhang@google.com>
Subject: Re: [PATCH v3 20/28] KVM: x86/mmu: Allow yielding when zapping GFNs for defunct TDP MMU root
Date: Tue, 1 Mar 2022 21:12:39 +0100 [thread overview]
Message-ID: <f444790d-3bc7-9870-576e-29f30354a63b@redhat.com> (raw)
In-Reply-To: <Yh53V23gSJ6jphnS@google.com>
On 3/1/22 20:43, Sean Christopherson wrote:
>> and after spending quite some time I wonder if all this should just be
>>
>> if (refcount_dec_not_one(&root->tdp_mmu_root_count))
>> return;
>>
>> if (!xchg(&root->role.invalid, true) {
>
> The refcount being '1' means there's another task currently using root, marking
> the root invalid will mean checks on the root's validity are non-deterministic
> for the other task.
Do you mean it's not possible to use refcount_dec_not_one, otherwise
kvm_tdp_mmu_get_root is not guaranteed to reject the root?
>> tdp_mmu_zap_root(kvm, root, shared);
>>
>> /*
>> * Do not assume the refcount is still 1: because
>> * tdp_mmu_zap_root can yield, a different task
>> * might have grabbed a reference to this root.
>> *
>> if (refcount_dec_not_one(&root->tdp_mmu_root_count))
>
> This is wrong, _this_ task can't drop a reference taken by the other task.
This is essentially the "kvm_tdp_mmu_put_root(kvm, root, shared);" (or
"goto beginning_of_function;") part of your patch.
>> return;
>> }
>>
>> /*
>> * The root is invalid, and its reference count has reached
>> * zero. It must have been zapped either in the "if" above or
>> * by someone else, and we're definitely the last thread to see
>> * it apart from RCU-protected page table walks.
>> */
>> refcount_set(&root->tdp_mmu_root_count, 0);
>
> Not sure what you intended here, KVM should never force a refcount to '0'.
It's turning a refcount_dec_not_one into a refcount_dec_and_test. It
seems legit to me, because the only refcount_inc_not_zero is in a
write-side critical section. If the refcount goes to zero on the
read-side, the root is gone for good.
> xchg() is a very good idea. The smp_mb_*() stuff was carried over from the previous
> version where this sequence set another flag in addition to role.invalid.
>
> Is this less funky (untested)?
>
> /*
> * Invalidate the root to prevent it from being reused by a vCPU while
> * the root is being zapped, i.e. to allow yielding while zapping the
> * root (see below).
> *
> * Free the root if it's already invalid. Invalid roots must be zapped
> * before their last reference is put, i.e. there's no work to be done,
> * and all roots must be invalidated before they're freed (this code).
> * Re-zapping invalid roots would put KVM into an infinite loop.
> *
> * Note, xchg() provides an implicit barrier to ensure role.invalid is
> * visible if a concurrent reader acquires a reference after the root's
> * refcount is reset.
> */
> if (xchg(root->role.invalid, true))
> spin_lock(&kvm->arch.tdp_mmu_pages_lock);
> list_del_rcu(&root->link);
> spin_unlock(&kvm->arch.tdp_mmu_pages_lock);
>
> call_rcu(&root->rcu_head, tdp_mmu_free_sp_rcu_callback);
> return;
> }
Based on my own version, I guess you mean (without comments due to
family NMI):
if (!refcount_dec_and_test(&root->tdp_mmu_root_count))
return;
if (!xchg(&root->role.invalid, true) {
refcount_set(&root->tdp_mmu_count, 1);
tdp_mmu_zap_root(kvm, root, shared);
if (!refcount_dec_and_test(&root->tdp_mmu_root_count))
return;
}
spin_lock(&kvm->arch.tdp_mmu_pages_lock);
list_del_rcu(&root->link);
spin_unlock(&kvm->arch.tdp_mmu_pages_lock);
call_rcu(&root->rcu_head, tdp_mmu_free_sp_rcu_callback);
Paolo
next prev parent reply other threads:[~2022-03-01 20:12 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-26 0:15 [PATCH v3 00/28] KVM: x86/mmu: Overhaul TDP MMU zapping and flushing Sean Christopherson
2022-02-26 0:15 ` [PATCH v3 01/28] KVM: x86/mmu: Use common iterator for walking invalid TDP MMU roots Sean Christopherson
2022-03-02 19:08 ` Mingwei Zhang
2022-03-02 19:51 ` Sean Christopherson
2022-03-03 0:57 ` Mingwei Zhang
2022-02-26 0:15 ` [PATCH v3 02/28] KVM: x86/mmu: Check for present SPTE when clearing dirty bit in TDP MMU Sean Christopherson
2022-03-02 19:50 ` Mingwei Zhang
2022-02-26 0:15 ` [PATCH v3 03/28] KVM: x86/mmu: Fix wrong/misleading comments in TDP MMU fast zap Sean Christopherson
2022-02-28 23:15 ` Ben Gardon
2022-02-26 0:15 ` [PATCH v3 04/28] KVM: x86/mmu: Formalize TDP MMU's (unintended?) deferred TLB flush logic Sean Christopherson
2022-03-02 23:59 ` Mingwei Zhang
2022-03-03 0:12 ` Sean Christopherson
2022-03-03 1:20 ` Mingwei Zhang
2022-03-03 1:41 ` Sean Christopherson
2022-03-03 4:50 ` Mingwei Zhang
2022-03-03 16:45 ` Sean Christopherson
2022-02-26 0:15 ` [PATCH v3 05/28] KVM: x86/mmu: Document that zapping invalidated roots doesn't need to flush Sean Christopherson
2022-02-28 23:17 ` Ben Gardon
2022-02-26 0:15 ` [PATCH v3 06/28] KVM: x86/mmu: Require mmu_lock be held for write in unyielding root iter Sean Christopherson
2022-02-28 23:26 ` Ben Gardon
2022-02-26 0:15 ` [PATCH v3 07/28] KVM: x86/mmu: Check for !leaf=>leaf, not PFN change, in TDP MMU SP removal Sean Christopherson
2022-03-01 0:11 ` Ben Gardon
2022-03-03 18:02 ` Mingwei Zhang
2022-02-26 0:15 ` [PATCH v3 08/28] KVM: x86/mmu: Batch TLB flushes from TDP MMU for MMU notifier change_spte Sean Christopherson
2022-03-03 18:08 ` Mingwei Zhang
2022-02-26 0:15 ` [PATCH v3 09/28] KVM: x86/mmu: Drop RCU after processing each root in MMU notifier hooks Sean Christopherson
2022-03-03 18:24 ` Mingwei Zhang
2022-03-03 18:32 ` Mingwei Zhang
2022-02-26 0:15 ` [PATCH v3 10/28] KVM: x86/mmu: Add helpers to read/write TDP MMU SPTEs and document RCU Sean Christopherson
2022-03-03 18:34 ` Mingwei Zhang
2022-02-26 0:15 ` [PATCH v3 11/28] KVM: x86/mmu: WARN if old _or_ new SPTE is REMOVED in non-atomic path Sean Christopherson
2022-03-03 18:37 ` Mingwei Zhang
2022-02-26 0:15 ` [PATCH v3 12/28] KVM: x86/mmu: Refactor low-level TDP MMU set SPTE helper to take raw vals Sean Christopherson
2022-03-03 18:47 ` Mingwei Zhang
2022-02-26 0:15 ` [PATCH v3 13/28] KVM: x86/mmu: Zap only the target TDP MMU shadow page in NX recovery Sean Christopherson
2022-02-26 0:15 ` [PATCH v3 14/28] KVM: x86/mmu: Skip remote TLB flush when zapping all of TDP MMU Sean Christopherson
2022-03-01 0:19 ` Ben Gardon
2022-03-03 18:50 ` Mingwei Zhang
2022-02-26 0:15 ` [PATCH v3 15/28] KVM: x86/mmu: Add dedicated helper to zap TDP MMU root shadow page Sean Christopherson
2022-03-01 0:32 ` Ben Gardon
2022-03-03 21:19 ` Mingwei Zhang
2022-03-03 21:24 ` Mingwei Zhang
2022-03-03 23:06 ` Sean Christopherson
2022-02-26 0:15 ` [PATCH v3 16/28] KVM: x86/mmu: Require mmu_lock be held for write to zap TDP MMU range Sean Christopherson
2022-02-26 0:15 ` [PATCH v3 17/28] KVM: x86/mmu: Zap only TDP MMU leafs in kvm_zap_gfn_range() Sean Christopherson
2022-02-26 0:15 ` [PATCH v3 18/28] KVM: x86/mmu: Do remote TLB flush before dropping RCU in TDP MMU resched Sean Christopherson
2022-02-26 0:15 ` [PATCH v3 19/28] KVM: x86/mmu: Defer TLB flush to caller when freeing TDP MMU shadow pages Sean Christopherson
2022-02-26 0:15 ` [PATCH v3 20/28] KVM: x86/mmu: Allow yielding when zapping GFNs for defunct TDP MMU root Sean Christopherson
2022-03-01 18:21 ` Paolo Bonzini
2022-03-01 19:43 ` Sean Christopherson
2022-03-01 20:12 ` Paolo Bonzini [this message]
2022-03-02 2:13 ` Sean Christopherson
2022-03-02 14:54 ` Paolo Bonzini
2022-03-02 17:43 ` Sean Christopherson
2022-02-26 0:15 ` [PATCH v3 21/28] KVM: x86/mmu: Zap roots in two passes to avoid inducing RCU stalls Sean Christopherson
2022-03-01 0:43 ` Ben Gardon
2022-02-26 0:15 ` [PATCH v3 22/28] KVM: x86/mmu: Zap defunct roots via asynchronous worker Sean Christopherson
2022-03-01 17:57 ` Ben Gardon
2022-03-02 17:25 ` Paolo Bonzini
2022-03-02 17:35 ` Sean Christopherson
2022-03-02 18:33 ` David Matlack
2022-03-02 18:36 ` Paolo Bonzini
2022-03-02 18:01 ` Sean Christopherson
2022-03-02 18:20 ` Paolo Bonzini
2022-03-02 19:33 ` Sean Christopherson
2022-03-02 20:14 ` Paolo Bonzini
2022-03-02 20:47 ` Sean Christopherson
2022-03-02 21:22 ` Paolo Bonzini
2022-03-02 22:25 ` Sean Christopherson
2022-02-26 0:15 ` [PATCH v3 23/28] KVM: x86/mmu: Check for a REMOVED leaf SPTE before making the SPTE Sean Christopherson
2022-03-01 18:06 ` Ben Gardon
2022-02-26 0:15 ` [PATCH v3 24/28] KVM: x86/mmu: WARN on any attempt to atomically update REMOVED SPTE Sean Christopherson
2022-02-26 0:15 ` [PATCH v3 25/28] KVM: selftests: Move raw KVM_SET_USER_MEMORY_REGION helper to utils Sean Christopherson
2022-02-26 0:15 ` [PATCH v3 26/28] KVM: selftests: Split out helper to allocate guest mem via memfd Sean Christopherson
2022-02-28 23:36 ` David Woodhouse
2022-03-02 18:36 ` Paolo Bonzini
2022-03-02 21:55 ` David Woodhouse
2022-02-26 0:15 ` [PATCH v3 27/28] KVM: selftests: Define cpu_relax() helpers for s390 and x86 Sean Christopherson
2022-02-26 0:15 ` [PATCH v3 28/28] KVM: selftests: Add test to populate a VM with the max possible guest mem Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f444790d-3bc7-9870-576e-29f30354a63b@redhat.com \
--to=pbonzini@redhat.com \
--cc=bgardon@google.com \
--cc=borntraeger@linux.ibm.com \
--cc=david@redhat.com \
--cc=dmatlack@google.com \
--cc=frankja@linux.ibm.com \
--cc=imbrenda@linux.ibm.com \
--cc=jmattson@google.com \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mizhang@google.com \
--cc=seanjc@google.com \
--cc=vkuznets@redhat.com \
--cc=wanpengli@tencent.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®