Re: [PATCH v2 11/19] power: reset: mt6323-poweroff: Use devm_register_sys_off_handler(POWER_OFF)

[AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>]

Il 05/02/24 20:44, Andrew Davis ha scritto:
> Use device life-cycle managed register function to simplify probe and
> exit paths.
> 
> Signed-off-by: Andrew Davis <afd@ti.com>
> ---
>   drivers/power/reset/mt6323-poweroff.c | 28 ++++++++++++++-------------
>   1 file changed, 15 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/power/reset/mt6323-poweroff.c b/drivers/power/reset/mt6323-poweroff.c
> index 57a63c0ab7fb7..ca5d11b17ff03 100644
> --- a/drivers/power/reset/mt6323-poweroff.c
> +++ b/drivers/power/reset/mt6323-poweroff.c
> @@ -14,6 +14,7 @@
>   #include <linux/platform_device.h>
>   #include <linux/mfd/mt6397/core.h>
>   #include <linux/mfd/mt6397/rtc.h>
> +#include <linux/reboot.h>
>   
>   struct mt6323_pwrc {
>   	struct device *dev;
> @@ -21,11 +22,9 @@ struct mt6323_pwrc {
>   	u32 base;
>   };
>   
> -static struct mt6323_pwrc *mt_pwrc;
> -
> -static void mt6323_do_pwroff(void)
> +static int mt6323_do_pwroff(struct sys_off_data *data)
>   {
> -	struct mt6323_pwrc *pwrc = mt_pwrc;
> +	struct mt6323_pwrc *pwrc = data->cb_data;
>   	unsigned int val;
>   	int ret;
>   
> @@ -44,6 +43,8 @@ static void mt6323_do_pwroff(void)
>   	mdelay(1000);
>   
>   	WARN_ONCE(1, "Unable to power off system\n");
> +
> +	return NOTIFY_DONE;
>   }
>   
>   static int mt6323_pwrc_probe(struct platform_device *pdev)
> @@ -51,6 +52,7 @@ static int mt6323_pwrc_probe(struct platform_device *pdev)
>   	struct mt6397_chip *mt6397_chip = dev_get_drvdata(pdev->dev.parent);
>   	struct mt6323_pwrc *pwrc;
>   	struct resource *res;
> +	int ret;
>   
>   	pwrc = devm_kzalloc(&pdev->dev, sizeof(*pwrc), GFP_KERNEL);
>   	if (!pwrc)
> @@ -63,19 +65,20 @@ static int mt6323_pwrc_probe(struct platform_device *pdev)
>   	pwrc->base = res->start;
>   	pwrc->regmap = mt6397_chip->regmap;
>   	pwrc->dev = &pdev->dev;
> -	mt_pwrc = pwrc;
>   
> -	pm_power_off = &mt6323_do_pwroff;
> +	ret = devm_register_sys_off_handler(pwrc->dev,
> +					    SYS_OFF_MODE_POWER_OFF,
> +					    SYS_OFF_PRIO_DEFAULT,
> +					    mt6323_do_pwroff,
> +					    pwrc);

	if (ret)
		return dev_err_probe(....);

Regards,
Angelo

> +	if (ret) {
> +		dev_err(pwrc->dev, "failed to register power-off handler: %d\n", ret);
> +		return ret;
> +	}
>