mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Paul Cercueil <paul@crapouillou.net>
To: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>,
	tsbogend@alpha.franken.de
Cc: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
	linux-mips@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] mips: dts: ingenic: Remove unnecessary AIC clocks
Date: Fri, 05 May 2023 18:53:04 +0200	[thread overview]
Message-ID: <f52d02cd797088cd599d5bda5653495d987ba85b.camel@crapouillou.net> (raw)
In-Reply-To: <20230505142400.1270848-1-aidanmacdonald.0x0@gmail.com>

Hi Aidan,

Le vendredi 05 mai 2023 à 15:24 +0100, Aidan MacDonald a écrit :
> The "ext" and "pll half" clocks don't belong in the DT. They are
> not consumed directly by the AIC and are only used as the parent
> clocks of the "i2s" clock. An operating system should be able to
> figure out that information itself because it presumably knows the
> layout of the clock tree.
> 
> Removing these from the DT should be safe from a compatibility
> point of view because the jz4740-i2s driver in Linux does not, and
> never did depend on them.

Agreed.

> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
> Link:
> https://lore.kernel.org/all/20221028103418.17578-1-aidanmacdonald.0x0@gmail.com/

Reviewed-by: Paul Cercueil <paul@crapouillou.net>

Cheers,
-Paul

> ---
> This is a resend of patch 2/3 from a previous submission which is
> linked above.
> 
> v1->v2: updated commit message
> 
>  arch/mips/boot/dts/ingenic/jz4725b.dtsi | 7 ++-----
>  arch/mips/boot/dts/ingenic/jz4740.dtsi  | 7 ++-----
>  arch/mips/boot/dts/ingenic/jz4770.dtsi  | 5 ++---
>  3 files changed, 6 insertions(+), 13 deletions(-)
> 
> diff --git a/arch/mips/boot/dts/ingenic/jz4725b.dtsi
> b/arch/mips/boot/dts/ingenic/jz4725b.dtsi
> index e9e48022f631..acbbe8c4664c 100644
> --- a/arch/mips/boot/dts/ingenic/jz4725b.dtsi
> +++ b/arch/mips/boot/dts/ingenic/jz4725b.dtsi
> @@ -198,11 +198,8 @@ aic: audio-controller@10020000 {
>  
>                 #sound-dai-cells = <0>;
>  
> -               clocks = <&cgu JZ4725B_CLK_AIC>,
> -                        <&cgu JZ4725B_CLK_I2S>,
> -                        <&cgu JZ4725B_CLK_EXT>,
> -                        <&cgu JZ4725B_CLK_PLL_HALF>;
> -               clock-names = "aic", "i2s", "ext", "pll half";
> +               clocks = <&cgu JZ4725B_CLK_AIC>, <&cgu
> JZ4725B_CLK_I2S>;
> +               clock-names = "aic", "i2s";
>  
>                 interrupt-parent = <&intc>;
>                 interrupts = <10>;
> diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi
> b/arch/mips/boot/dts/ingenic/jz4740.dtsi
> index 7f76cba03a08..bdd6f4d82ec9 100644
> --- a/arch/mips/boot/dts/ingenic/jz4740.dtsi
> +++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi
> @@ -192,11 +192,8 @@ aic: audio-controller@10020000 {
>                 interrupt-parent = <&intc>;
>                 interrupts = <18>;
>  
> -               clocks = <&cgu JZ4740_CLK_AIC>,
> -                        <&cgu JZ4740_CLK_I2S>,
> -                        <&cgu JZ4740_CLK_EXT>,
> -                        <&cgu JZ4740_CLK_PLL_HALF>;
> -               clock-names = "aic", "i2s", "ext", "pll half";
> +               clocks = <&cgu JZ4740_CLK_AIC>, <&cgu
> JZ4740_CLK_I2S>;
> +               clock-names = "aic", "i2s";
>  
>                 dmas = <&dmac 25 0xffffffff>, <&dmac 24 0xffffffff>;
>                 dma-names = "rx", "tx";
> diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi
> b/arch/mips/boot/dts/ingenic/jz4770.dtsi
> index bda0a3a86ed5..9c0099919db7 100644
> --- a/arch/mips/boot/dts/ingenic/jz4770.dtsi
> +++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi
> @@ -238,9 +238,8 @@ aic: audio-controller@10020000 {
>  
>                 #sound-dai-cells = <0>;
>  
> -               clocks = <&cgu JZ4770_CLK_AIC>, <&cgu
> JZ4770_CLK_I2S>,
> -                        <&cgu JZ4770_CLK_EXT>, <&cgu
> JZ4770_CLK_PLL0>;
> -               clock-names = "aic", "i2s", "ext", "pll half";
> +               clocks = <&cgu JZ4770_CLK_AIC>, <&cgu
> JZ4770_CLK_I2S>;
> +               clock-names = "aic", "i2s";
>  
>                 interrupt-parent = <&intc>;
>                 interrupts = <34>;


  reply	other threads:[~2023-05-05 16:53 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-05 14:24 Aidan MacDonald
2023-05-05 16:53 ` Paul Cercueil [this message]
2023-05-23  9:07 ` Thomas Bogendoerfer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f52d02cd797088cd599d5bda5653495d987ba85b.camel@crapouillou.net \
    --to=paul@crapouillou.net \
    --cc=aidanmacdonald.0x0@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=tsbogend@alpha.franken.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®