From: Joao Pinto <Joao.Pinto@synopsys.com>
To: peppe.cavallaro@st.com, davem@davemloft.net, seraphin.bonnaffe@st.com
Cc: hock.leong.kweh@intel.com, niklas.cassel@axis.com, pavel@ucw.cz,
linux-kernel@vger.kernel.org, preid@electromag.com.au,
netdev@vger.kernel.org, Joao Pinto <Joao.Pinto@synopsys.com>
Subject: [PATCH v3] stmmac: CSR clock configuration fix
Date: Fri, 23 Dec 2016 10:15:59 +0000 [thread overview]
Message-ID: <f586b394955d543470b614ddc8c5bc766c450c40.1482487963.git.jpinto@synopsys.com> (raw)
When testing stmmac with my QoS reference design I checked a problem in the
CSR clock configuration that was impossibilitating the phy discovery, since
every read operation returned 0x0000ffff. This patch fixes the issue.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
---
changes v2->v3 (Phil Reid)
- Altera uses the reserved bit 5 also for CR clock, so the mask was changed
changes v1->v2 (David Miller)
- DWMAC100 and DWMAC1000 csr clocks masks should also be fixed for the patch
to make sense
drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c | 2 +-
drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c | 2 +-
drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 8 ++++----
3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
index b21d03f..be3c91c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
@@ -539,7 +539,7 @@ struct mac_device_info *dwmac1000_setup(void __iomem *ioaddr, int mcbins,
mac->mii.reg_shift = 6;
mac->mii.reg_mask = 0x000007C0;
mac->mii.clk_csr_shift = 2;
- mac->mii.clk_csr_mask = 0xF;
+ mac->mii.clk_csr_mask = GENMASK(5, 2);
/* Get and dump the chip ID */
*synopsys_id = stmmac_get_synopsys_id(hwid);
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
index a1d582f..9dd2987 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
@@ -197,7 +197,7 @@ struct mac_device_info *dwmac100_setup(void __iomem *ioaddr, int *synopsys_id)
mac->mii.reg_shift = 6;
mac->mii.reg_mask = 0x000007C0;
mac->mii.clk_csr_shift = 2;
- mac->mii.clk_csr_mask = 0xF;
+ mac->mii.clk_csr_mask = GENMASK(5, 2);
/* Synopsys Id is not available on old chips */
*synopsys_id = 0;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index 23322fd..fda01f7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -81,8 +81,8 @@ static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
value |= (phyaddr << priv->hw->mii.addr_shift)
& priv->hw->mii.addr_mask;
value |= (phyreg << priv->hw->mii.reg_shift) & priv->hw->mii.reg_mask;
- value |= (priv->clk_csr & priv->hw->mii.clk_csr_mask)
- << priv->hw->mii.clk_csr_shift;
+ value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
+ & priv->hw->mii.clk_csr_mask;
if (priv->plat->has_gmac4)
value |= MII_GMAC4_READ;
@@ -122,8 +122,8 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
& priv->hw->mii.addr_mask;
value |= (phyreg << priv->hw->mii.reg_shift) & priv->hw->mii.reg_mask;
- value |= ((priv->clk_csr & priv->hw->mii.clk_csr_mask)
- << priv->hw->mii.clk_csr_shift);
+ value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
+ & priv->hw->mii.clk_csr_mask;
if (priv->plat->has_gmac4)
value |= MII_GMAC4_WRITE;
--
2.9.3
next reply other threads:[~2016-12-23 10:16 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-23 10:15 Joao Pinto [this message]
2016-12-23 16:46 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f586b394955d543470b614ddc8c5bc766c450c40.1482487963.git.jpinto@synopsys.com \
--to=joao.pinto@synopsys.com \
--cc=davem@davemloft.net \
--cc=hock.leong.kweh@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=niklas.cassel@axis.com \
--cc=pavel@ucw.cz \
--cc=peppe.cavallaro@st.com \
--cc=preid@electromag.com.au \
--cc=seraphin.bonnaffe@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®