[PATCH v1 1/4] arm64: dts: imx91-var-som: Mark I2C recovery GPIOs as open drain

[Stefano Radaelli <stefano.radaelli21@gmail.com>]

From: Stefano Radaelli <stefano.r@variscite.com>

Mark the SCL and SDA GPIOs used for LPI2C3 bus recovery as open drain to
match the I2C bus requirements.
This also avoids the warning emitted when the I2C core enforces
open-drain operation on SCL.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
 arch/arm64/boot/dts/freescale/imx91-var-som.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx91-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx91-var-som.dtsi
index b30a0d8a81ba..a90a784f1966 100644
--- a/arch/arm64/boot/dts/freescale/imx91-var-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx91-var-som.dtsi
@@ -89,8 +89,8 @@ &lpi2c3 {
 	pinctrl-0 = <&pinctrl_lpi2c3>;
 	pinctrl-1 = <&pinctrl_lpi2c3_gpio>;
 	pinctrl-2 = <&pinctrl_lpi2c3_gpio>;
-	scl-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio2 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio2 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	pmic@25 {
-- 
2.47.3