mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Juergen Gross <jgross@suse.com>
To: Stefano Stabellini <sstabellini@kernel.org>, xen-devel@lists.xen.org
Cc: linux-kernel@vger.kernel.org, boris.ostrovsky@oracle.com,
	Stefano Stabellini <stefano@aporeto.com>
Subject: Re: [PATCH v1 08/13] xen/pvcalls: implement sendmsg
Date: Mon, 24 Jul 2017 21:51:54 +0200	[thread overview]
Message-ID: <f66b2a87-2e02-6210-6ce4-a0ca63177887@suse.com> (raw)
In-Reply-To: <1500682323-25940-8-git-send-email-sstabellini@kernel.org>

On 22/07/17 02:11, Stefano Stabellini wrote:
> Send data to an active socket by copying data to the "out" ring. Take
> the active socket out_mutex so that only one function can access the
> ring at any given time.
> 
> If not enough room is available on the ring, rather than returning
> immediately or sleep-waiting, spin for up to 5000 cycles. This small
> optimization turns out to improve performance significantly.
> 
> Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
> CC: boris.ostrovsky@oracle.com
> CC: jgross@suse.com
> ---
>  drivers/xen/pvcalls-front.c | 109 ++++++++++++++++++++++++++++++++++++++++++++
>  drivers/xen/pvcalls-front.h |   3 ++
>  2 files changed, 112 insertions(+)
> 
> diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c
> index f3a04a2..bf29f40 100644
> --- a/drivers/xen/pvcalls-front.c
> +++ b/drivers/xen/pvcalls-front.c
> @@ -27,6 +27,7 @@
>  #define PVCALLS_INVALID_ID (UINT_MAX)
>  #define RING_ORDER XENBUS_MAX_RING_GRANT_ORDER
>  #define PVCALLS_NR_REQ_PER_RING __CONST_RING_SIZE(xen_pvcalls, XEN_PAGE_SIZE)
> +#define PVCALLS_FRON_MAX_SPIN 5000

Any reason not to name it PVCALLS_FRONT_MAX_SPIN? I first thought you
meant FROM instead.


Juergen

>  
>  struct pvcalls_bedata {
>  	struct xen_pvcalls_front_ring ring;
> @@ -77,6 +78,22 @@ struct sock_mapping {
>  	};
>  };
>  
> +static int pvcalls_front_write_todo(struct sock_mapping *map)
> +{
> +	struct pvcalls_data_intf *intf = map->active.ring;
> +	RING_IDX cons, prod, size = XEN_FLEX_RING_SIZE(intf->ring_order);
> +	int32_t error;
> +
> +	cons = intf->out_cons;
> +	prod = intf->out_prod;
> +	error = intf->out_error;
> +	if (error == -ENOTCONN)
> +		return 0;
> +	if (error != 0)
> +		return error;
> +	return size - pvcalls_queued(prod, cons, size);
> +}
> +
>  static irqreturn_t pvcalls_front_event_handler(int irq, void *dev_id)
>  {
>  	struct xenbus_device *dev = dev_id;
> @@ -304,6 +321,98 @@ int pvcalls_front_connect(struct socket *sock, struct sockaddr *addr,
>  	return ret;
>  }
>  
> +static int __write_ring(struct pvcalls_data_intf *intf,
> +			struct pvcalls_data *data,
> +			struct iov_iter *msg_iter,
> +			size_t len)
> +{
> +	RING_IDX cons, prod, size, masked_prod, masked_cons;
> +	RING_IDX array_size = XEN_FLEX_RING_SIZE(intf->ring_order);
> +	int32_t error;
> +
> +	cons = intf->out_cons;
> +	prod = intf->out_prod;
> +	error = intf->out_error;
> +	/* read indexes before continuing */
> +	virt_mb();
> +
> +	if (error < 0)
> +		return error;
> +
> +	size = pvcalls_queued(prod, cons, array_size);
> +	if (size >= array_size)
> +		return 0;
> +	if (len > array_size - size)
> +		len = array_size - size;
> +
> +	masked_prod = pvcalls_mask(prod, array_size);
> +	masked_cons = pvcalls_mask(cons, array_size);
> +
> +	if (masked_prod < masked_cons) {
> +		copy_from_iter(data->out + masked_prod, len, msg_iter);
> +	} else {
> +		if (len > array_size - masked_prod) {
> +			copy_from_iter(data->out + masked_prod,
> +				       array_size - masked_prod, msg_iter);
> +			copy_from_iter(data->out,
> +				       len - (array_size - masked_prod),
> +				       msg_iter);
> +		} else {
> +			copy_from_iter(data->out + masked_prod, len, msg_iter);
> +		}
> +	}
> +	/* write to ring before updating pointer */
> +	virt_wmb();
> +	intf->out_prod += len;
> +
> +	return len;
> +}
> +
> +int pvcalls_front_sendmsg(struct socket *sock, struct msghdr *msg,
> +			  size_t len)
> +{
> +	struct pvcalls_bedata *bedata;
> +	struct sock_mapping *map;
> +	int sent = 0, tot_sent = 0;
> +	int count = 0, flags;
> +
> +	if (!pvcalls_front_dev)
> +		return -ENOTCONN;
> +	bedata = dev_get_drvdata(&pvcalls_front_dev->dev);
> +
> +	map = (struct sock_mapping *) READ_ONCE(sock->sk->sk_send_head);
> +	if (!map)
> +		return -ENOTSOCK;
> +
> +	flags = msg->msg_flags;
> +	if (flags & (MSG_CONFIRM|MSG_DONTROUTE|MSG_EOR|MSG_OOB))
> +		return -EOPNOTSUPP;
> +
> +	mutex_lock(&map->active.out_mutex);
> +	if ((flags & MSG_DONTWAIT) && !pvcalls_front_write_todo(map)) {
> +		mutex_unlock(&map->active.out_mutex);
> +		return -EAGAIN;
> +	}
> +
> +again:
> +	count++;
> +	sent = __write_ring(map->active.ring,
> +			    &map->active.data, &msg->msg_iter,
> +			    len);
> +	if (sent > 0) {
> +		len -= sent;
> +		tot_sent += sent;
> +		notify_remote_via_irq(map->active.irq);
> +	}
> +	if (sent >= 0 && len > 0 && count < PVCALLS_FRON_MAX_SPIN)
> +		goto again;
> +	if (sent < 0)
> +		tot_sent = sent;
> +
> +	mutex_unlock(&map->active.out_mutex);
> +	return tot_sent;
> +}
> +
>  int pvcalls_front_bind(struct socket *sock, struct sockaddr *addr, int addr_len)
>  {
>  	struct pvcalls_bedata *bedata;
> diff --git a/drivers/xen/pvcalls-front.h b/drivers/xen/pvcalls-front.h
> index ab4f1da..d937c24 100644
> --- a/drivers/xen/pvcalls-front.h
> +++ b/drivers/xen/pvcalls-front.h
> @@ -13,5 +13,8 @@ int pvcalls_front_bind(struct socket *sock,
>  int pvcalls_front_accept(struct socket *sock,
>  			 struct socket *newsock,
>  			 int flags);
> +int pvcalls_front_sendmsg(struct socket *sock,
> +			  struct msghdr *msg,
> +			  size_t len);
>  
>  #endif
> 

  reply	other threads:[~2017-07-24 19:52 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-22  0:11 [PATCH v1 00/13] introduce the Xen PV Calls frontend Stefano Stabellini
2017-07-22  0:11 ` [PATCH v1 01/13] xen/pvcalls: introduce the pvcalls xenbus frontend Stefano Stabellini
2017-07-22  0:11   ` [PATCH v1 02/13] xen/pvcalls: connect to the backend Stefano Stabellini
2017-07-24 19:23     ` Juergen Gross
2017-07-25 20:10       ` Stefano Stabellini
2017-07-22  0:11   ` [PATCH v1 03/13] xen/pvcalls: implement socket command and handle events Stefano Stabellini
2017-07-24 19:29     ` Juergen Gross
2017-07-25 20:43       ` Stefano Stabellini
2017-07-22  0:11   ` [PATCH v1 04/13] xen/pvcalls: implement connect command Stefano Stabellini
2017-07-24 19:40     ` Juergen Gross
2017-07-24 22:45       ` Stefano Stabellini
2017-07-22  0:11   ` [PATCH v1 05/13] xen/pvcalls: implement bind command Stefano Stabellini
2017-07-24 19:43     ` Juergen Gross
2017-07-24 22:51       ` Stefano Stabellini
2017-07-22  0:11   ` [PATCH v1 06/13] xen/pvcalls: implement listen command Stefano Stabellini
2017-07-24 19:44     ` Juergen Gross
2017-07-24 22:51       ` Stefano Stabellini
2017-07-22  0:11   ` [PATCH v1 07/13] xen/pvcalls: implement accept command Stefano Stabellini
2017-07-24 19:47     ` Juergen Gross
2017-07-24 22:53       ` Stefano Stabellini
2017-07-22  0:11   ` [PATCH v1 08/13] xen/pvcalls: implement sendmsg Stefano Stabellini
2017-07-24 19:51     ` Juergen Gross [this message]
2017-07-24 22:38       ` Stefano Stabellini
2017-07-22  0:11   ` [PATCH v1 09/13] xen/pvcalls: implement recvmsg Stefano Stabellini
2017-07-24 19:56     ` Juergen Gross
2017-07-24 22:37       ` Stefano Stabellini
2017-07-22  0:12   ` [PATCH v1 10/13] xen/pvcalls: implement poll command Stefano Stabellini
2017-07-24 20:08     ` Juergen Gross
2017-07-25 20:59       ` Stefano Stabellini
2017-07-22  0:12   ` [PATCH v1 11/13] xen/pvcalls: implement release command Stefano Stabellini
2017-07-24 20:14     ` Juergen Gross
2017-07-25 21:07       ` Stefano Stabellini
2017-07-22  0:12   ` [PATCH v1 12/13] xen/pvcalls: implement frontend disconnect Stefano Stabellini
2017-07-24 20:16     ` Juergen Gross
2017-07-22  0:12   ` [PATCH v1 13/13] xen: introduce a Kconfig option to enable the pvcalls frontend Stefano Stabellini
2017-07-24 20:17     ` Juergen Gross
2017-07-24 22:36       ` Stefano Stabellini
2017-07-24 19:06   ` [PATCH v1 01/13] xen/pvcalls: introduce the pvcalls xenbus frontend Juergen Gross
2017-07-24 22:32     ` Stefano Stabellini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f66b2a87-2e02-6210-6ce4-a0ca63177887@suse.com \
    --to=jgross@suse.com \
    --cc=boris.ostrovsky@oracle.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sstabellini@kernel.org \
    --cc=stefano@aporeto.com \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®