mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Marcello Sylvester Bauer <sylv@sylv.io>
To: Guenter Roeck <linux@roeck-us.net>, Jean Delvare <jdelvare@suse.com>
Cc: linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org,
	Patrick Rudolph <patrick.rudolph@9elements.com>,
	Marcello Sylvester Bauer <sylv@sylv.io>
Subject: [PATCH v4 3/3] hwmon (xdpe12284): Add regulator support
Date: Wed,  2 Mar 2022 10:49:21 +0100	[thread overview]
Message-ID: <f69b8e7fa32cd2bad9516d8fa590abb87c7e4869.1646214248.git.sylv@sylv.io> (raw)
In-Reply-To: <cover.1646214248.git.sylv@sylv.io>

Add simple on/off regulator support for xdpe12284 and
other pmbus parts supported by the xdpe12284 driver.

Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
---
 drivers/hwmon/pmbus/Kconfig     |  6 ++++++
 drivers/hwmon/pmbus/xdpe12284.c | 11 +++++++++++
 2 files changed, 17 insertions(+)

diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 6552467c588d..a2ea1d5a8765 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -417,6 +417,12 @@ config SENSORS_XDPE122
 	  This driver can also be built as a module. If so, the module will
 	  be called xdpe12284.
 
+config SENSORS_XDPE122_REGULATOR
+	bool "Regulator support for XDPE122 and compatibles"
+	depends on SENSORS_XDPE122 && REGULATOR
+	help
+	  Uses the xdpe12284 or compatible as regulator.
+
 config SENSORS_ZL6100
 	tristate "Intersil ZL6100 and compatibles"
 	help
diff --git a/drivers/hwmon/pmbus/xdpe12284.c b/drivers/hwmon/pmbus/xdpe12284.c
index b979c88d2e87..18fffc5d749b 100644
--- a/drivers/hwmon/pmbus/xdpe12284.c
+++ b/drivers/hwmon/pmbus/xdpe12284.c
@@ -10,6 +10,8 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/regulator/driver.h>
+
 #include "pmbus.h"
 
 #define XDPE122_PROT_VR12_5MV		0x01 /* VR12.0 mode, 5-mV DAC */
@@ -122,6 +124,11 @@ static int xdpe122_identify(struct i2c_client *client,
 	return 0;
 }
 
+static const struct regulator_desc xdpe122_reg_desc[] = {
+	PMBUS_REGULATOR("vout", 0),
+	PMBUS_REGULATOR("vout", 1),
+};
+
 static struct pmbus_driver_info xdpe122_info = {
 	.pages = XDPE122_PAGE_NUM,
 	.format[PSC_VOLTAGE_IN] = linear,
@@ -138,6 +145,10 @@ static struct pmbus_driver_info xdpe122_info = {
 		PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
 		PMBUS_HAVE_POUT | PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT,
 	.identify = xdpe122_identify,
+#if IS_ENABLED(CONFIG_SENSORS_XDPE122_REGULATOR)
+	.num_regulators = 2,
+	.reg_desc = xdpe122_reg_desc,
+#endif
 };
 
 static int xdpe122_probe(struct i2c_client *client)
-- 
2.35.1


  parent reply	other threads:[~2022-03-02  9:50 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-02  9:49 [PATCH v4 0/3] Support XDPE112 Marcello Sylvester Bauer
2022-03-02  9:49 ` [PATCH v4 1/3] dt-bindings: trivial-devices: Add xdpe11280 Marcello Sylvester Bauer
2022-03-02  9:49 ` [PATCH v4 2/3] hwmon (xdpe12284): Add support for xdpe11280 Marcello Sylvester Bauer
2022-03-02  9:49 ` Marcello Sylvester Bauer [this message]
2022-03-02 17:52 ` [PATCH v4 0/3] Support XDPE112 Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f69b8e7fa32cd2bad9516d8fa590abb87c7e4869.1646214248.git.sylv@sylv.io \
    --to=sylv@sylv.io \
    --cc=jdelvare@suse.com \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=patrick.rudolph@9elements.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®