From: Ryan Roberts <ryan.roberts@arm.com>
To: Chris Li <chrisl@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>,
David Hildenbrand <david@redhat.com>,
Matthew Wilcox <willy@infradead.org>,
Huang Ying <ying.huang@intel.com>, Gao Xiang <xiang@kernel.org>,
Yu Zhao <yuzhao@google.com>, Yang Shi <shy828301@gmail.com>,
Michal Hocko <mhocko@suse.com>,
Kefeng Wang <wangkefeng.wang@huawei.com>,
Barry Song <21cnbao@gmail.com>, Lance Yang <ioworker0@gmail.com>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v6 1/6] mm: swap: Remove CLUSTER_FLAG_HUGE from swap_cluster_info:flags
Date: Mon, 8 Apr 2024 12:56:41 +0100 [thread overview]
Message-ID: <f6bd3567-5540-41f3-bb3e-f9a942483115@arm.com> (raw)
In-Reply-To: <CANeU7QkZqJXCfj6oMZHM51nwqKYeJ+UG+rE8ZZ2HVUssM-RfhQ@mail.gmail.com>
On 04/04/2024 14:43, Chris Li wrote:
> On Thu, Apr 4, 2024 at 12:06 AM Ryan Roberts <ryan.roberts@arm.com> wrote:
>>
>> On 03/04/2024 23:12, Chris Li wrote:
>>> Hi Ryan,
>>>
>>> Sorry for the late reply. I want to review this series but don't have
>>> the chance to do it sooner.
>>
>> No problem. This series is now in mm-unstable, so if you want to request any
>> changes in the other patches, I'd prefer it sooner rather than later, if possible.
>>
>>>
>>> On Wed, Apr 3, 2024 at 4:40 AM Ryan Roberts <ryan.roberts@arm.com> wrote:
>>>>
>>>> As preparation for supporting small-sized THP in the swap-out path,
>>>> without first needing to split to order-0, Remove the CLUSTER_FLAG_HUGE,
>>>> which, when present, always implies PMD-sized THP, which is the same as
>>>> the cluster size.
>>>>
>>>> The only use of the flag was to determine whether a swap entry refers to
>>>> a single page or a PMD-sized THP in swap_page_trans_huge_swapped().
>>>> Instead of relying on the flag, we now pass in nr_pages, which
>>>> originates from the folio's number of pages. This allows the logic to
>>>> work for folios of any order.
>>>>
>>>> The one snag is that one of the swap_page_trans_huge_swapped() call
>>>> sites does not have the folio. But it was only being called there to
>>>> shortcut a call __try_to_reclaim_swap() in some cases.
>>>> __try_to_reclaim_swap() gets the folio and (via some other functions)
>>>> calls swap_page_trans_huge_swapped(). So I've removed the problematic
>>>> call site and believe the new logic should be functionally equivalent.
>>>>
>>>> That said, removing the fast path means that we will take a reference
>>>> and trylock a large folio much more often, which we would like to avoid.
>>>> The next patch will solve this.
>>>>
>>>> Removing CLUSTER_FLAG_HUGE also means we can remove split_swap_cluster()
>>>> which used to be called during folio splitting, since
>>>> split_swap_cluster()'s only job was to remove the flag.
>>>
>>> Seems necessary to remove the assumption of large folio be PMD size.
>>>
>>> Acked-by: Chris Li <chrisl@kernel.org>
>>
>> Thanks!
>>
>>>
>>>>
>>>> Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
>>>> Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
>>>> ---
>>>> include/linux/swap.h | 10 ----------
>>>> mm/huge_memory.c | 3 ---
>>>> mm/swapfile.c | 47 ++++++++------------------------------------
>>>> 3 files changed, 8 insertions(+), 52 deletions(-)
>>>>
>>>> diff --git a/include/linux/swap.h b/include/linux/swap.h
>>>> index a211a0383425..f6f78198f000 100644
>>>> --- a/include/linux/swap.h
>>>> +++ b/include/linux/swap.h
>>>> @@ -259,7 +259,6 @@ struct swap_cluster_info {
>>>> };
>>>> #define CLUSTER_FLAG_FREE 1 /* This cluster is free */
>>>> #define CLUSTER_FLAG_NEXT_NULL 2 /* This cluster has no next cluster */
>>>> -#define CLUSTER_FLAG_HUGE 4 /* This cluster is backing a transparent huge page */
>>>>
>>>> /*
>>>> * We assign a cluster to each CPU, so each CPU can allocate swap entry from
>>>> @@ -590,15 +589,6 @@ static inline int add_swap_extent(struct swap_info_struct *sis,
>>>> }
>>>> #endif /* CONFIG_SWAP */
>>>>
>>>> -#ifdef CONFIG_THP_SWAP
>>>> -extern int split_swap_cluster(swp_entry_t entry);
>>>> -#else
>>>> -static inline int split_swap_cluster(swp_entry_t entry)
>>>> -{
>>>> - return 0;
>>>> -}
>>>> -#endif
>>>> -
>>>> #ifdef CONFIG_MEMCG
>>>> static inline int mem_cgroup_swappiness(struct mem_cgroup *memcg)
>>>> {
>>>> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
>>>> index ea6d1f09a0b9..3ca9282a0dc9 100644
>>>> --- a/mm/huge_memory.c
>>>> +++ b/mm/huge_memory.c
>>>> @@ -2844,9 +2844,6 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>>>> shmem_uncharge(folio->mapping->host, nr_dropped);
>>>> remap_page(folio, nr);
>>>>
>>>> - if (folio_test_swapcache(folio))
>>>> - split_swap_cluster(folio->swap);
>>>> -
>>>> /*
>>>> * set page to its compound_head when split to non order-0 pages, so
>>>> * we can skip unlocking it below, since PG_locked is transferred to
>>>> diff --git a/mm/swapfile.c b/mm/swapfile.c
>>>> index 5e6d2304a2a4..0d44ee2b4f9c 100644
>>>> --- a/mm/swapfile.c
>>>> +++ b/mm/swapfile.c
>>>> @@ -343,18 +343,6 @@ static inline void cluster_set_null(struct swap_cluster_info *info)
>>>> info->data = 0;
>>>> }
>>>>
>>>> -static inline bool cluster_is_huge(struct swap_cluster_info *info)
>>>> -{
>>>> - if (IS_ENABLED(CONFIG_THP_SWAP))
>>>> - return info->flags & CLUSTER_FLAG_HUGE;
>>>> - return false;
>>>> -}
>>>> -
>>>> -static inline void cluster_clear_huge(struct swap_cluster_info *info)
>>>> -{
>>>> - info->flags &= ~CLUSTER_FLAG_HUGE;
>>>> -}
>>>> -
>>>> static inline struct swap_cluster_info *lock_cluster(struct swap_info_struct *si,
>>>> unsigned long offset)
>>>> {
>>>> @@ -1027,7 +1015,7 @@ static int swap_alloc_cluster(struct swap_info_struct *si, swp_entry_t *slot)
>>>> offset = idx * SWAPFILE_CLUSTER;
>>>> ci = lock_cluster(si, offset);
>>>> alloc_cluster(si, idx);
>>>> - cluster_set_count_flag(ci, SWAPFILE_CLUSTER, CLUSTER_FLAG_HUGE);
>>>> + cluster_set_count(ci, SWAPFILE_CLUSTER);
>>>>
>>>> memset(si->swap_map + offset, SWAP_HAS_CACHE, SWAPFILE_CLUSTER);
>>>> unlock_cluster(ci);
>>>> @@ -1365,7 +1353,6 @@ void put_swap_folio(struct folio *folio, swp_entry_t entry)
>>>>
>>>> ci = lock_cluster_or_swap_info(si, offset);
>>>> if (size == SWAPFILE_CLUSTER) {
>>>> - VM_BUG_ON(!cluster_is_huge(ci));
>>>> map = si->swap_map + offset;
>>>> for (i = 0; i < SWAPFILE_CLUSTER; i++) {
>>>> val = map[i];
>>>> @@ -1373,7 +1360,6 @@ void put_swap_folio(struct folio *folio, swp_entry_t entry)
>>>> if (val == SWAP_HAS_CACHE)
>>>> free_entries++;
>>>> }
>>>> - cluster_clear_huge(ci);
>>>> if (free_entries == SWAPFILE_CLUSTER) {
>>>> unlock_cluster_or_swap_info(si, ci);
>>>> spin_lock(&si->lock);
>>>> @@ -1395,23 +1381,6 @@ void put_swap_folio(struct folio *folio, swp_entry_t entry)
>>>> unlock_cluster_or_swap_info(si, ci);
>>>> }
>>>>
>>>> -#ifdef CONFIG_THP_SWAP
>>>> -int split_swap_cluster(swp_entry_t entry)
>>>> -{
>>>> - struct swap_info_struct *si;
>>>> - struct swap_cluster_info *ci;
>>>> - unsigned long offset = swp_offset(entry);
>>>> -
>>>> - si = _swap_info_get(entry);
>>>> - if (!si)
>>>> - return -EBUSY;
>>>> - ci = lock_cluster(si, offset);
>>>> - cluster_clear_huge(ci);
>>>> - unlock_cluster(ci);
>>>> - return 0;
>>>> -}
>>>> -#endif
>>>> -
>>>> static int swp_entry_cmp(const void *ent1, const void *ent2)
>>>> {
>>>> const swp_entry_t *e1 = ent1, *e2 = ent2;
>>>> @@ -1519,22 +1488,23 @@ int swp_swapcount(swp_entry_t entry)
>>>> }
>>>>
>>>> static bool swap_page_trans_huge_swapped(struct swap_info_struct *si,
>>>> - swp_entry_t entry)
>>>> + swp_entry_t entry,
>>>> + unsigned int nr_pages)
>>>> {
>>>> struct swap_cluster_info *ci;
>>>> unsigned char *map = si->swap_map;
>>>> unsigned long roffset = swp_offset(entry);
>>>> - unsigned long offset = round_down(roffset, SWAPFILE_CLUSTER);
>>>> + unsigned long offset = round_down(roffset, nr_pages);
>>>
>>> It is obvious this code only works for powers two nr_pages. The
>>> SWAPFILE_CLSTER is a power of two. If we switch to an API for
>>> nr_pages, we might want to warn/ban passing in the non-power of two
>>> nr_pages.
>>
>> Indeed. I could change the prototype to pass order instead of nr_pages, then
>> generate nr_pages (= 1 << order) inside the function. But given the function is
>> static and only called from a single callsite, I don't see it as hugely
>> important. I'd prefer to leave as is at this stage, unless you have strong
>> objection.
>
> That is fine with me.
Given David spotted a bug in a later patch, I'm re-spinning the series, so will
make this change to pass the order.
>
>>
>>>
>>>> int i;
>>>> bool ret = false;
>>>>
>>>> ci = lock_cluster_or_swap_info(si, offset);
>>>> - if (!ci || !cluster_is_huge(ci)) {
>>>> + if (!ci || nr_pages == 1) {
>>>> if (swap_count(map[roffset]))
>>>> ret = true;
>>>> goto unlock_out;
>>>> }
>>>> - for (i = 0; i < SWAPFILE_CLUSTER; i++) {
>>>> + for (i = 0; i < nr_pages; i++) {
>>>
>>> Here we assume the swap entry offset is contiguous. That is beyond
>>> your patch's scope. If in the future we want to have non-contiguous
>>> swap entries to swap out large pages, we will need to find out and
>>> change all the places that have the assumption of contiguous swap
>>> entries.
>>
>> Yes there are tonnes of places that make this assumption :)
>
> Yes, that is why I want to have some wrapper API to mark the existing
> place that makes the assumption. Hopefully we can just change those
> wrapper functions to implement the non-contiguous version of swap.
>
> Thank you for the patch.
>
> Chris
next prev parent reply other threads:[~2024-04-08 11:56 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-03 11:40 [PATCH v6 0/6] Swap-out mTHP without splitting Ryan Roberts
2024-04-03 11:40 ` [PATCH v6 1/6] mm: swap: Remove CLUSTER_FLAG_HUGE from swap_cluster_info:flags Ryan Roberts
2024-04-03 22:12 ` Chris Li
2024-04-04 7:06 ` Ryan Roberts
2024-04-04 13:43 ` Chris Li
2024-04-08 11:56 ` Ryan Roberts [this message]
2024-04-05 9:25 ` David Hildenbrand
2024-04-03 11:40 ` [PATCH v6 2/6] mm: swap: free_swap_and_cache_nr() as batched free_swap_and_cache() Ryan Roberts
2024-04-05 10:13 ` David Hildenbrand
2024-04-08 9:22 ` Ryan Roberts
2024-04-08 9:43 ` David Hildenbrand
2024-04-08 10:07 ` Ryan Roberts
2024-04-08 10:24 ` David Hildenbrand
2024-04-08 10:39 ` Ryan Roberts
2024-04-08 12:07 ` Ryan Roberts
2024-04-08 12:47 ` Ryan Roberts
2024-04-08 13:27 ` Ryan Roberts
2024-04-08 15:13 ` David Hildenbrand
2024-04-03 11:40 ` [PATCH v6 3/6] mm: swap: Simplify struct percpu_cluster Ryan Roberts
2024-04-03 11:40 ` [PATCH v6 4/6] mm: swap: Allow storage of all mTHP orders Ryan Roberts
2024-04-05 10:38 ` David Hildenbrand
2024-04-07 6:02 ` Huang, Ying
2024-04-08 9:24 ` Ryan Roberts
2024-04-08 9:33 ` David Hildenbrand
2024-04-08 9:35 ` Ryan Roberts
2024-04-07 7:38 ` Barry Song
2024-04-08 9:28 ` Ryan Roberts
2024-04-03 11:40 ` [PATCH v6 5/6] mm: vmscan: Avoid split during shrink_folio_list() Ryan Roberts
2024-04-05 10:42 ` David Hildenbrand
2024-04-08 9:31 ` Ryan Roberts
2024-04-03 11:40 ` [PATCH v6 6/6] mm: madvise: Avoid split during MADV_PAGEOUT and MADV_COLD Ryan Roberts
2024-04-03 17:17 ` Ryan Roberts
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f6bd3567-5540-41f3-bb3e-f9a942483115@arm.com \
--to=ryan.roberts@arm.com \
--cc=21cnbao@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=chrisl@kernel.org \
--cc=david@redhat.com \
--cc=ioworker0@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mhocko@suse.com \
--cc=shy828301@gmail.com \
--cc=wangkefeng.wang@huawei.com \
--cc=willy@infradead.org \
--cc=xiang@kernel.org \
--cc=ying.huang@intel.com \
--cc=yuzhao@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®