Re: [PATCH v2 1/2] arm64: dts: ti: k3-am62p/j722s: Remove HS400 support from common

[Judith Mendez <jm@ti.com>]

Hi,

On 9/8/25 3:44 PM, Andrew Davis wrote:
> On 9/8/25 12:38 PM, Judith Mendez wrote:
>> Since eMMC HS400 has been descoped for J722s due to errata i2478 [0]
>> and is supported for AM62Px device, remove eMMC HS400 support from
>> common-main.dtsi and include only in am62p-main.dtsi.
>>
>> [0] https://www.ti.com/lit/pdf/sprz575
>> Signed-off-by: Judith Mendez <jm@ti.com>
>> ---
>>   arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi | 3 ---
>>   arch/arm64/boot/dts/ti/k3-am62p-main.dtsi              | 6 ++++++
>>   2 files changed, 6 insertions(+), 3 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi b/ 
>> arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
>> index 4427b12058a6..0c05bcf1d776 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
>> @@ -576,15 +576,12 @@ sdhci0: mmc@fa10000 {
>>           bus-width = <8>;
>>           mmc-ddr-1_8v;
>>           mmc-hs200-1_8v;
>> -        mmc-hs400-1_8v;
>>           ti,clkbuf-sel = <0x7>;
>> -        ti,strobe-sel = <0x77>;
>>           ti,trm-icp = <0x8>;
>>           ti,otap-del-sel-legacy = <0x1>;
>>           ti,otap-del-sel-mmc-hs = <0x1>;
>>           ti,otap-del-sel-ddr52 = <0x6>;
>>           ti,otap-del-sel-hs200 = <0x8>;
>> -        ti,otap-del-sel-hs400 = <0x5>;
>>           ti,itap-del-sel-legacy = <0x10>;
>>           ti,itap-del-sel-mmc-hs = <0xa>;
>>           ti,itap-del-sel-ddr52 = <0x3>;
>> diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/ 
>> boot/dts/ti/k3-am62p-main.dtsi
>> index 6aea9d3f134e..90afe21e972b 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
>> @@ -31,6 +31,12 @@ usb1: usb@31100000 {
>>               snps,usb2-lpm-disable;
>>           };
>>       };
>> +
>> +    sdhci0: mmc@fa10000 {
> 
> The node already has a label where it is defined, so you could just use:
> 
> &sdhci0 {
>     ...
> 
> here at the base level, and not have it inside cbass_main.
> 

Oops, missed that detail, thanks Andrew. Will fix for v3.

~ Judith