Re: [PATCH 2/2][next] net: ethtool: Avoid thousands of -Wflex-array-member-not-at-end warnings

["Gustavo A. R. Silva" <gustavo@embeddedor.com>]

On 29/10/24 07:58, Jakub Kicinski wrote:
> On Mon, 21 Oct 2024 13:02:27 -0600 Gustavo A. R. Silva wrote:
>> @@ -3025,7 +3025,7 @@ static int bnxt_set_link_ksettings(struct net_device *dev,
>>   {
>>   	struct bnxt *bp = netdev_priv(dev);
>>   	struct bnxt_link_info *link_info = &bp->link_info;
>> -	const struct ethtool_link_settings *base = &lk_ksettings->base;
>> +	const struct ethtool_link_settings_hdr *base = &lk_ksettings->base;
> 
> Please improve the variable ordering while at it. Longest list first,
> so move the @base definition first.

OK. This would end up looking like:

	const struct ethtool_link_settings_hdr *base = &lk_ksettings->base;
	struct bnxt *bp = netdev_priv(dev);
	struct bnxt_link_info *link_info = &bp->link_info;



> 
>>   	bool set_pause = false;
>>   	u32 speed, lanes = 0;
>>   	int rc = 0;
>> diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
>> index 7f3f5afa864f..cc43294bdc96 100644
>> --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
>> +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
>> @@ -663,7 +663,7 @@ static int get_link_ksettings(struct net_device *dev,
>>   			      struct ethtool_link_ksettings *link_ksettings)
>>   {
>>   	struct port_info *pi = netdev_priv(dev);
>> -	struct ethtool_link_settings *base = &link_ksettings->base;
>> +	struct ethtool_link_settings_hdr *base = &link_ksettings->base;
> 
> ditto
> 
>>   	/* For the nonce, the Firmware doesn't send up Port State changes
>>   	 * when the Virtual Interface attached to the Port is down.  So
>> @@ -719,7 +719,7 @@ static int set_link_ksettings(struct net_device *dev,
>>   {
>>   	struct port_info *pi = netdev_priv(dev);
>>   	struct link_config *lc = &pi->link_cfg;
>> -	const struct ethtool_link_settings *base = &link_ksettings->base;
>> +	const struct ethtool_link_settings_hdr *base = &link_ksettings->base;
> 
> and here
> 
>>   	struct link_config old_lc;
>>   	unsigned int fw_caps;
>>   	int ret = 0;
>> diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
>> index 2fbe0f059a0b..0d85ac342ac7 100644
>> --- a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
>> +++ b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
>> @@ -1437,7 +1437,7 @@ static int cxgb4vf_get_link_ksettings(struct net_device *dev,
>>   				  struct ethtool_link_ksettings *link_ksettings)
>>   {
>>   	struct port_info *pi = netdev_priv(dev);
>> -	struct ethtool_link_settings *base = &link_ksettings->base;
>> +	struct ethtool_link_settings_hdr *base = &link_ksettings->base;
> 
> and here
> 
>>   	/* For the nonce, the Firmware doesn't send up Port State changes
>>   	 * when the Virtual Interface attached to the Port is down.  So
>> diff --git a/drivers/net/ethernet/cisco/enic/enic_ethtool.c b/drivers/net/ethernet/cisco/enic/enic_ethtool.c
>> index f7986f2b6a17..8670eb394fad 100644
>> --- a/drivers/net/ethernet/cisco/enic/enic_ethtool.c
>> +++ b/drivers/net/ethernet/cisco/enic/enic_ethtool.c
>> @@ -130,7 +130,7 @@ static int enic_get_ksettings(struct net_device *netdev,
>>   			      struct ethtool_link_ksettings *ecmd)
>>   {
>>   	struct enic *enic = netdev_priv(netdev);
>> -	struct ethtool_link_settings *base = &ecmd->base;
>> +	struct ethtool_link_settings_hdr *base = &ecmd->base;
> 
> and here
> 
>>   	ethtool_link_ksettings_add_link_mode(ecmd, supported,
>>   					     10000baseT_Full);
> 
>> @@ -62,7 +62,7 @@ static int linkmodes_reply_size(const struct ethnl_req_info *req_base,
>>   {
>>   	const struct linkmodes_reply_data *data = LINKMODES_REPDATA(reply_base);
>>   	const struct ethtool_link_ksettings *ksettings = &data->ksettings;
>> -	const struct ethtool_link_settings *lsettings = &ksettings->base;
>> +	const struct ethtool_link_settings_hdr *lsettings = &ksettings->base;
> 
> here it was correct and now its not

I don't think you want to change this. `lsettings` is based on `ksettings`. So,
`ksettings` should go first. The same scenario for the one below.

> 
>>   	bool compact = req_base->flags & ETHTOOL_FLAG_COMPACT_BITSETS;
>>   	int len, ret;
>>   
>> @@ -103,7 +103,7 @@ static int linkmodes_fill_reply(struct sk_buff *skb,
>>   {
>>   	const struct linkmodes_reply_data *data = LINKMODES_REPDATA(reply_base);
>>   	const struct ethtool_link_ksettings *ksettings = &data->ksettings;
>> -	const struct ethtool_link_settings *lsettings = &ksettings->base;
>> +	const struct ethtool_link_settings_hdr *lsettings = &ksettings->base;
> 
> same
> 
>>   	bool compact = req_base->flags & ETHTOOL_FLAG_COMPACT_BITSETS;
>>   	int ret;
>