From: Jacob Bai <jacob.bai.au@gmail.com>
To: gregkh@linuxfoundation.org, linux-staging@lists.linux.dev,
linux-kernel@vger.kernel.org
Cc: Jacob Bai <jacob.bai.au@gmail.com>
Subject: [PATCH 3/3] staging: rtl8192e: remove unnecesscary macro define
Date: Sat, 5 Nov 2022 21:00:30 +1100 [thread overview]
Message-ID: <f71f1bd4e20f41fbe99944240437d8fca35e8d0c.1667641211.git.jacob.bai.au@gmail.com> (raw)
In-Reply-To: <cover.1667641211.git.jacob.bai.au@gmail.com>
remove useless macro defines
Signed-off-by: Jacob Bai <jacob.bai.au@gmail.com>
---
.../staging/rtl8192e/rtl8192e/r8192E_phy.c | 52 +++++++++----------
.../staging/rtl8192e/rtl8192e/r8192E_phy.h | 20 -------
2 files changed, 26 insertions(+), 46 deletions(-)
diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c b/drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c
index eabb4187d907..aad1842857c0 100644
--- a/drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c
+++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c
@@ -307,12 +307,12 @@ void rtl92e_config_mac(struct net_device *dev)
struct r8192_priv *priv = rtllib_priv(dev);
if (priv->bTXPowerDataReadFromEEPORM) {
- dwArrayLen = MACPHY_Array_PGLength;
- pdwArray = Rtl819XMACPHY_Array_PG;
+ dwArrayLen = RTL8192E_MAC_ARRAY_PG_LEN;
+ pdwArray = RTL8192E_MAC_ARRAY_PG;
} else {
- dwArrayLen = MACPHY_ArrayLength;
- pdwArray = Rtl819XMACPHY_Array;
+ dwArrayLen = RTL8192E_MAC_ARRAY_LEN;
+ pdwArray = RTL8192E_MAC_ARRAY;
}
for (i = 0; i < dwArrayLen; i += 3) {
if (pdwArray[i] == 0x318)
@@ -332,14 +332,14 @@ static void _rtl92e_phy_config_bb(struct net_device *dev, u8 ConfigType)
u16 AGCTAB_ArrayLen, PHY_REGArrayLen = 0;
struct r8192_priv *priv = rtllib_priv(dev);
- AGCTAB_ArrayLen = AGCTAB_ArrayLength;
- Rtl819XAGCTAB_Array_Table = Rtl819XAGCTAB_Array;
+ AGCTAB_ArrayLen = RTL8192E_AGC_TAB_ARRAY_LEN;
+ Rtl819XAGCTAB_Array_Table = RTL8192E_AGC_TAB_ARRAY;
if (priv->rf_type == RF_2T4R) {
- PHY_REGArrayLen = PHY_REGArrayLength;
- Rtl819XPHY_REGArray_Table = Rtl819XPHY_REGArray;
+ PHY_REGArrayLen = RTL8192E_PHY_REG_ARRAY_LEN;
+ Rtl819XPHY_REGArray_Table = RTL8192E_PHY_REG_ARRAY;
} else if (priv->rf_type == RF_1T2R) {
- PHY_REGArrayLen = PHY_REG_1T2RArrayLength;
- Rtl819XPHY_REGArray_Table = Rtl819XPHY_REG_1T2RArray;
+ PHY_REGArrayLen = RTL8192E_PHY_REG_1T2R_ARRAY_LEN;
+ Rtl819XPHY_REGArray_Table = RTL8192E_PHY_REG_1T2R_ARRAY;
}
if (ConfigType == BaseBand_Config_PHY_REG) {
@@ -668,50 +668,50 @@ u8 rtl92e_config_rf_path(struct net_device *dev, enum rf90_radio_path eRFPath)
switch (eRFPath) {
case RF90_PATH_A:
- for (i = 0; i < RadioA_ArrayLength; i += 2) {
- if (Rtl819XRadioA_Array[i] == 0xfe) {
+ for (i = 0; i < RTL8192E_RADIOA_ARRAY_LEN; i += 2) {
+ if (RTL8192E_RADIOA_ARRAY[i] == 0xfe) {
msleep(100);
continue;
}
- rtl92e_set_rf_reg(dev, eRFPath, Rtl819XRadioA_Array[i],
+ rtl92e_set_rf_reg(dev, eRFPath, RTL8192E_RADIOA_ARRAY[i],
bMask12Bits,
- Rtl819XRadioA_Array[i+1]);
+ RTL8192E_RADIOA_ARRAY[i+1]);
}
break;
case RF90_PATH_B:
- for (i = 0; i < RadioB_ArrayLength; i += 2) {
- if (Rtl819XRadioB_Array[i] == 0xfe) {
+ for (i = 0; i < RTL8192E_RADIOB_ARRAY_LEN; i += 2) {
+ if (RTL8192E_RADIOB_ARRAY[i] == 0xfe) {
msleep(100);
continue;
}
- rtl92e_set_rf_reg(dev, eRFPath, Rtl819XRadioB_Array[i],
+ rtl92e_set_rf_reg(dev, eRFPath, RTL8192E_RADIOB_ARRAY[i],
bMask12Bits,
- Rtl819XRadioB_Array[i+1]);
+ RTL8192E_RADIOB_ARRAY[i+1]);
}
break;
case RF90_PATH_C:
- for (i = 0; i < RadioC_ArrayLength; i += 2) {
- if (Rtl819XRadioC_Array[i] == 0xfe) {
+ for (i = 0; i < RTL8192E_RADIOC_ARRAY_LEN; i += 2) {
+ if (RTL8192E_RADIOC_ARRAY[i] == 0xfe) {
msleep(100);
continue;
}
- rtl92e_set_rf_reg(dev, eRFPath, Rtl819XRadioC_Array[i],
+ rtl92e_set_rf_reg(dev, eRFPath, RTL8192E_RADIOC_ARRAY[i],
bMask12Bits,
- Rtl819XRadioC_Array[i+1]);
+ RTL8192E_RADIOC_ARRAY[i+1]);
}
break;
case RF90_PATH_D:
- for (i = 0; i < RadioD_ArrayLength; i += 2) {
- if (Rtl819XRadioD_Array[i] == 0xfe) {
+ for (i = 0; i < RTL8192E_RADIOD_ARRAY_LEN; i += 2) {
+ if (RTL8192E_RADIOD_ARRAY[i] == 0xfe) {
msleep(100);
continue;
}
- rtl92e_set_rf_reg(dev, eRFPath, Rtl819XRadioD_Array[i],
+ rtl92e_set_rf_reg(dev, eRFPath, RTL8192E_RADIOD_ARRAY[i],
bMask12Bits,
- Rtl819XRadioD_Array[i+1]);
+ RTL8192E_RADIOD_ARRAY[i+1]);
}
break;
diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_phy.h b/drivers/staging/rtl8192e/rtl8192e/r8192E_phy.h
index e1c1f19b71a3..5e6527e835db 100644
--- a/drivers/staging/rtl8192e/rtl8192e/r8192E_phy.h
+++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_phy.h
@@ -9,26 +9,6 @@
#define MAX_DOZE_WAITING_TIMES_9x 64
-#define AGCTAB_ArrayLength RTL8192E_AGC_TAB_ARRAY_LEN
-#define MACPHY_ArrayLength RTL8192E_MAC_ARRAY_LEN
-#define RadioA_ArrayLength RTL8192E_RADIOA_ARRAY_LEN
-#define RadioB_ArrayLength RTL8192E_RADIOB_ARRAY_LEN
-#define MACPHY_Array_PGLength RTL8192E_MAC_ARRAY_PG_LEN
-#define RadioC_ArrayLength RTL8192E_RADIOC_ARRAY_LEN
-#define RadioD_ArrayLength RTL8192E_RADIOD_ARRAY_LEN
-#define PHY_REGArrayLength RTL8192E_PHY_REG_ARRAY_LEN
-#define PHY_REG_1T2RArrayLength RTL8192E_PHY_REG_1T2R_ARRAY_LEN
-
-#define Rtl819XMACPHY_Array_PG RTL8192E_MAC_ARRAY_PG
-#define Rtl819XMACPHY_Array RTL8192E_MAC_ARRAY
-#define Rtl819XRadioA_Array RTL8192E_RADIOA_ARRAY
-#define Rtl819XRadioB_Array RTL8192E_RADIOB_ARRAY
-#define Rtl819XRadioC_Array RTL8192E_RADIOC_ARRAY
-#define Rtl819XRadioD_Array RTL8192E_RADIOD_ARRAY
-#define Rtl819XAGCTAB_Array RTL8192E_AGC_TAB_ARRAY
-#define Rtl819XPHY_REGArray RTL8192E_PHY_REG_ARRAY
-#define Rtl819XPHY_REG_1T2RArray RTL8192E_PHY_REG_1T2R_ARRAY
-
extern u32 rtl819XAGCTAB_Array[];
enum hw90_block {
--
2.34.1
prev parent reply other threads:[~2022-11-05 10:01 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-05 10:00 [PATCH 0/3] staging: rtl8192e: trivial code cleanup patches Jacob Bai
2022-11-05 10:00 ` [PATCH 1/3] staging: rtl8192e: rename tables in r8192e_hwimg.c Jacob Bai
2022-11-05 10:00 ` [PATCH 2/3] staging: rtl8192e: rename r8192E_hwimg.c/h to table.c/h Jacob Bai
2022-11-05 11:49 ` kernel test robot
2022-11-05 10:00 ` Jacob Bai [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f71f1bd4e20f41fbe99944240437d8fca35e8d0c.1667641211.git.jacob.bai.au@gmail.com \
--to=jacob.bai.au@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®