Re: [PATCH v2] usb: dwc3: gadget: Prevent EP queuing while stopping transfers

[Wesley Cheng <wcheng@codeaurora.org>]

On 3/11/2021 3:18 PM, Thinh Nguyen wrote:
> Wesley Cheng wrote:
>> In the situations where the DWC3 gadget stops active transfers, once
>> calling the dwc3_gadget_giveback(), there is a chance where a function
>> driver can queue a new USB request in between the time where the dwc3
>> lock has been released and re-aquired.  This occurs after we've already
>> issued an ENDXFER command.  When the stop active transfers continues
>> to remove USB requests from all dep lists, the newly added request will
>> also be removed, while controller still has an active TRB for it.
>> This can lead to the controller accessing an unmapped memory address.
>>
>> Fix this by ensuring parameters to prevent EP queuing are set before
>> calling the stop active transfers API.
>>
>> Fixes: ae7e86108b12 ("usb: dwc3: Stop active transfers before halting the controller")
>> Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
>> ---
>> Changes since V1:
>>  - Added Fixes tag to point to the commit this is addressing
>>
>>  drivers/usb/dwc3/gadget.c | 10 +++++-----
>>  1 file changed, 5 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
>> index 4780983..4d98fbf 100644
>> --- a/drivers/usb/dwc3/gadget.c
>> +++ b/drivers/usb/dwc3/gadget.c
>> @@ -783,8 +783,6 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
>>  
>>  	trace_dwc3_gadget_ep_disable(dep);
>>  
>> -	dwc3_remove_requests(dwc, dep);
>> -
>>  	/* make sure HW endpoint isn't stalled */
>>  	if (dep->flags & DWC3_EP_STALL)
>>  		__dwc3_gadget_ep_set_halt(dep, 0, false);
>> @@ -803,6 +801,8 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
>>  		dep->endpoint.desc = NULL;
>>  	}
>>  
>> +	dwc3_remove_requests(dwc, dep);
>> +
>>  	return 0;
>>  }
>>  
>> @@ -1617,7 +1617,7 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
>>  {
>>  	struct dwc3		*dwc = dep->dwc;
>>  
>> -	if (!dep->endpoint.desc || !dwc->pullups_connected) {
>> +	if (!dep->endpoint.desc || !dwc->pullups_connected || !dwc->connected) {
>>  		dev_err(dwc->dev, "%s: can't queue to disabled endpoint\n",
>>  				dep->name);
>>  		return -ESHUTDOWN;
>> @@ -2247,6 +2247,7 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
>>  	if (!is_on) {
>>  		u32 count;
>>  
>> +		dwc->connected = false;
> 
> 
> You want to set this before __dwc3_gadget_stop() right? Then you may
> want to remove this same setting few lines below this. Otherwise, this
> looks good.
> 
> Thanks,
> Thinh
> 
Hi Thinh,

Ah, good catch, must've missed that while porting this over from my
local branch.  Will remove that connected false setting a few lines down.

Thanks
Wesley Cheng

> 
>>  		/*
>>  		 * In the Synopsis DesignWare Cores USB3 Databook Rev. 3.30a
>>  		 * Section 4.1.8 Table 4-7, it states that for a device-initiated
>> @@ -3329,8 +3330,6 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
>>  {
>>  	u32			reg;
>>  
>> -	dwc->connected = true;
>> -
>>  	/*
>>  	 * WORKAROUND: DWC3 revisions <1.88a have an issue which
>>  	 * would cause a missing Disconnect Event if there's a
>> @@ -3370,6 +3369,7 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
>>  	 * transfers."
>>  	 */
>>  	dwc3_stop_active_transfers(dwc);
>> +	dwc->connected = true;
>>  
>>  	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
>>  	reg &= ~DWC3_DCTL_TSTCTRL_MASK;
>>
> 

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project