Re: [PATCH 6/6] dt-bindings: power: supply: qcom,smb2: add bindings for smb2 driver

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 01/04/2022 22:26, Caleb Connolly wrote:
> Add devicetree bindings for the Qualcomm PMI8998/PM660 SMB2 charger
> drivers.
> 
> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
> ---
>  .../bindings/power/supply/qcom,smb2.yaml      | 68 +++++++++++++++++++
>  1 file changed, 68 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/supply/qcom,smb2.yaml
> 
> diff --git a/Documentation/devicetree/bindings/power/supply/qcom,smb2.yaml b/Documentation/devicetree/bindings/power/supply/qcom,smb2.yaml
> new file mode 100644
> index 000000000000..1bea1fef78b8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/supply/qcom,smb2.yaml
> @@ -0,0 +1,68 @@
> +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/power/supply/qcom,smb2.yaml#

Hi,

Are you sure "smb2" is a real Qualcomm versioning? IOW, is there going
to be smb3 in the future? If not, better to just name the file according
to model, so like compatible and like other existing schemas from Qualcomm.

> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm PMI8998/PM660 Switch-Mode Battery Charger "2"
> +
> +maintainers:
> +  - Caleb Connolly <caleb.connolly@linaro.org>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,pmi8998-smb2
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    items:
> +      - description: usb plugin

Just maxItems:1 (description is obvious and matches names).

> +
> +  interrupt-names:
> +    items:
> +      - const: usb-plugin
> +
> +  io-channels:
> +    items:
> +      - description: USB in current in uA
> +      - description: USB in voltage in uV
> +
> +  io-channel-names:
> +    items:
> +      - const: usbin_i
> +      - const: usbin_v
> +

What about monitored-battery? How do you configure the battery
characteristics?

> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - interrupt-names
> +  - io-channels
> +  - io-channel-names
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    pmic {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      #interrupt-cells = <4>;
> +
> +      smb2@1000 {

Generic node name please, so "charger".



Best regards,
Krzysztof