Another Seagate SATA drive with the NCQ+FLUSH_CACHE bug

["Kyle Moffett" <kyle@moffetthome.net>]

I've got a 250GB Seagate Barracuda 7200.10 (ST3250820AS) with firmware
3.AAE on it here that seems to suffer from the same problem hang
problem as a number of similar seagate drives.  What information do I
need to provide to get it added to the blacklist?  Beyond that I'm
also going through seagate support to try to get a firmware upgrade
for the thing, as performance without NCQ tends to be not-so-good.

Kernel messages of the SATA error below (it's on an ICH controller of
some variety).

Cheers,
Kyle Moffett

[100226.331199] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[100226.331241] ata1.01: cmd ea/00:00:00:00:00/00:00:00:00:00/b0 tag 0
[100226.331244]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[100226.331821] ata1.01: status: { DRDY }
[100231.371102] ata1: link is slow to respond, please be patient (ready=0)
[100236.353120] ata1: device not ready (errno=-16), forcing hardreset
[100236.353156] ata1: soft resetting link
[100241.551827] ata1: link is slow to respond, please be patient (ready=0)
[100246.367827] ata1: SRST failed (errno=-16)
[100246.367859] ata1: soft resetting link
[100251.563827] ata1: link is slow to respond, please be patient (ready=0)
[100256.377083] ata1: SRST failed (errno=-16)
[100256.377116] ata1: soft resetting link
[100261.575827] ata1: link is slow to respond, please be patient (ready=0)
[100291.423827] ata1: SRST failed (errno=-16)
[100291.423861] ata1: soft resetting link
[100296.451826] ata1: SRST failed (errno=-16)
[100296.451855] ata1: reset failed, giving up
[100296.451881] ata1.00: disabled
[100296.451906] ata1.01: disabled
[100296.451950] ata1: EH complete