mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: Thierry Chatard <tchatard@gmail.com>
Cc: LKML <linux-kernel@vger.kernel.org>,
	Hans de Goede <hansg@kernel.org>,
	 lee@kernel.org, platform-driver-x86@vger.kernel.org,
	djrscally@gmail.com,  linux-media@vger.kernel.org,
	mchehab@kernel.org,  sakari.ailus@linux.intel.com,
	jacopo.mondi@ideasonboard.com,  nicholas@rothemail.net,
	andriy.shevchenko@intel.com, v.vitovt@gmail.com
Subject: Re: [PATCH v8 1/6] platform/x86: intel_lpss: add resource conflict quirk for Dell Latitude 5285
Date: Wed, 16 Sep 2026 02:16:44 +0300 (EEST)	[thread overview]
Message-ID: <f777df5b-0f19-5e86-94e8-11fb73cd341b@linux.intel.com> (raw)
In-Reply-To: <20260826112452.13539-2-tchatard@gmail.com>

On Wed, 26 Aug 2026, Thierry Chatard wrote:

Why is this platform/x86: prefixed??

--
 i.

> The Dell Latitude 5285 2-in-1 has a BIOS bug where the ACPI GEXP device
> and the I2C4 controller (INT3446) both claim the same MMIO region via the
> shared SB04 variable. This causes intel_lpss_acpi to fail binding to I2C4
> with -EBUSY, preventing the front camera (OV5670) sensor from being
> registered.
> 
> Match the affected machine by DMI and the affected device by ACPI ID,
> carrying QUIRK_IGNORE_RESOURCE_CONFLICTS in the ACPI match data and
> applying it to the per-device info in probe. This follows the quirk
> organisation used by the PCI counterpart.
> 
> Signed-off-by: Thierry Chatard <tchatard@gmail.com>
> ---
>  drivers/mfd/intel-lpss-acpi.c | 32 ++++++++++++++++++++++++++++++++
>  1 file changed, 32 insertions(+)
> 
> diff --git a/drivers/mfd/intel-lpss-acpi.c b/drivers/mfd/intel-lpss-acpi.c
> index 63406026d..1ac1dcc41 100644
> --- a/drivers/mfd/intel-lpss-acpi.c
> +++ b/drivers/mfd/intel-lpss-acpi.c
> @@ -8,7 +8,9 @@
>   *          Mika Westerberg <mika.westerberg@linux.intel.com>
>   */
>  
> +#include <linux/acpi.h>
>  #include <linux/device.h>
> +#include <linux/dmi.h>
>  #include <linux/gfp_types.h>
>  #include <linux/ioport.h>
>  #include <linux/mod_devicetable.h>
> @@ -172,6 +174,27 @@ static const struct acpi_device_id intel_lpss_acpi_ids[] = {
>  };
>  MODULE_DEVICE_TABLE(acpi, intel_lpss_acpi_ids);
>  
> +/*
> + * Devices that need a quirk applied only on the machines matched by
> + * intel_lpss_quirk_dmi[] below. The quirk to apply is carried in the
> + * matching entry's driver_data.
> + */
> +static const struct acpi_device_id intel_lpss_acpi_quirk_ids[] = {
> +	/* Dell Latitude 5285: ACPI GEXP device conflicts with I2C4 (INT3446) */
> +	{ "INT3446", QUIRK_IGNORE_RESOURCE_CONFLICTS },
> +	{ }
> +};
> +
> +static const struct dmi_system_id intel_lpss_quirk_dmi[] = {
> +	{
> +		.matches = {
> +			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
> +			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Latitude 5285"),
> +		},
> +	},
> +	{ }
> +};
> +
>  static int intel_lpss_acpi_probe(struct platform_device *pdev)
>  {
>  	const struct intel_lpss_platform_info *data;
> @@ -186,6 +209,15 @@ static int intel_lpss_acpi_probe(struct platform_device *pdev)
>  	if (!info)
>  		return -ENOMEM;
>  
> +	/* Apply per-device quirks that are only needed on certain machines */
> +	if (dmi_check_system(intel_lpss_quirk_dmi)) {
> +		const struct acpi_device_id *id;
> +
> +		id = acpi_match_device(intel_lpss_acpi_quirk_ids, &pdev->dev);
> +		if (id)
> +			info->quirks |= id->driver_data;
> +	}
> +
>  	/* No need to check mem and irq here as intel_lpss_probe() does it for us */
>  	info->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  	info->irq = platform_get_irq(pdev, 0);
> 

  parent reply	other threads:[~2026-09-15 23:16 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-26 11:24 [PATCH v8 0/6] Enable cameras on Dell Latitude 5285 2-in-1 Thierry Chatard
2026-08-26 11:24 ` [PATCH v8 1/6] platform/x86: intel_lpss: add resource conflict quirk for Dell Latitude 5285 Thierry Chatard
2026-08-27  7:13   ` Andy Shevchenko
2026-08-27  7:15     ` Andy Shevchenko
2026-09-15 23:16   ` Ilpo Järvinen [this message]
2026-08-26 11:24 ` [PATCH v8 2/6] platform/x86: int3472: tps68470: use unsigned int for GPIO lookup loop counters Thierry Chatard
2026-08-27  7:17   ` Andy Shevchenko
2026-08-26 11:24 ` [PATCH v8 3/6] platform/x86: int3472: tps68470: fix clock consumer registration for Dell Latitude 5285 Thierry Chatard
2026-08-27  7:22   ` Andy Shevchenko
2026-08-26 11:24 ` [PATCH v8 4/6] platform/x86: int3472: tps68470: add board data " Thierry Chatard
2026-08-26 11:24 ` [PATCH v8 5/6] media: ipu-bridge: add sensor configuration for OV8858 (INT3477) Thierry Chatard
2026-08-26 11:24 ` [PATCH v8 6/6] media: ov8858: add ACPI device ID INT3477 Thierry Chatard
2026-08-27  8:32   ` Andy Shevchenko
2026-08-27 12:49 ` [PATCH v8 0/6] Enable cameras on Dell Latitude 5285 2-in-1 Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f777df5b-0f19-5e86-94e8-11fb73cd341b@linux.intel.com \
    --to=ilpo.jarvinen@linux.intel.com \
    --cc=andriy.shevchenko@intel.com \
    --cc=djrscally@gmail.com \
    --cc=hansg@kernel.org \
    --cc=jacopo.mondi@ideasonboard.com \
    --cc=lee@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=nicholas@rothemail.net \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    --cc=tchatard@gmail.com \
    --cc=v.vitovt@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®